Input: WM97xx - add support for streaming mode on Mainstone

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

1 files changed, 302 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
new file mode 100644
index 000000000000..a79f029b91c0
--- /dev/null
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -0,0 +1,302 @@
+/*
+ * mainstone-wm97xx.c  --  Mainstone Continuous Touch screen driver for
+ *                         Wolfson WM97xx AC97 Codecs.
+ *
+ * Copyright 2004, 2007 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Notes:
+ *     This is a wm97xx extended touch driver to capture touch
+ *     data in a continuous manner on the Intel XScale archictecture
+ *
+ *  Features:
+ *       - codecs supported:- WM9705, WM9712, WM9713
+ *       - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/wm97xx.h>
+#include <linux/io.h>
+#include <asm/arch/pxa-regs.h>
+
+#define VERSION         "0.13"
+
+struct continuous {
+        u16 id;    /* codec id */
+        u8 code;   /* continuous code */
+        u8 reads;  /* number of coord reads per read cycle */
+        u32 speed; /* number of coords per second */
+};
+
+#define WM_READS(sp) ((sp / HZ) + 1)
+
+static const struct continuous cinfo[] = {
+        {WM9705_ID2, 0, WM_READS(94), 94},
+        {WM9705_ID2, 1, WM_READS(188), 188},
+        {WM9705_ID2, 2, WM_READS(375), 375},
+        {WM9705_ID2, 3, WM_READS(750), 750},
+        {WM9712_ID2, 0, WM_READS(94), 94},
+        {WM9712_ID2, 1, WM_READS(188), 188},
+        {WM9712_ID2, 2, WM_READS(375), 375},
+        {WM9712_ID2, 3, WM_READS(750), 750},
+        {WM9713_ID2, 0, WM_READS(94), 94},
+        {WM9713_ID2, 1, WM_READS(120), 120},
+        {WM9713_ID2, 2, WM_READS(154), 154},
+        {WM9713_ID2, 3, WM_READS(188), 188},
+};
+
+/* continuous speed index */
+static int sp_idx;
+static u16 last, tries;
+
+/*
+ * Pen sampling frequency (Hz) in continuous mode.
+ */
+static int cont_rate = 200;
+module_param(cont_rate, int, 0);
+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
+
+/*
+ * Pen down detection.
+ *
+ * This driver can either poll or use an interrupt to indicate a pen down
+ * event. If the irq request fails then it will fall back to polling mode.
+ */
+static int pen_int;
+module_param(pen_int, int, 0);
+MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
+
+/*
+ * Pressure readback.
+ *
+ * Set to 1 to read back pen down pressure
+ */
+static int pressure;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
+
+/*
+ * AC97 touch data slot.
+ *
+ * Touch screen readback data ac97 slot
+ */
+static int ac97_touch_slot = 5;
+module_param(ac97_touch_slot, int, 0);
+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
+
+
+/* flush AC97 slot 5 FIFO on pxa machines */
+#ifdef CONFIG_PXA27x
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+        schedule_timeout_uninterruptible(1);
+
+        while (MISR & (1 << 2))
+                MODR;
+}
+#else
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+        int count = 16;
+        schedule_timeout_uninterruptible(1);
+
+        while (count < 16) {
+                MODR;
+                count--;
+        }
+}
+#endif
+
+static int wm97xx_acc_pen_down(struct wm97xx *wm)
+{
+        u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
+        int reads = 0;
+
+        /* When the AC97 queue has been drained we need to allow time
+         * to buffer up samples otherwise we end up spinning polling
+         * for samples.  The controller can't have a suitably low
+         * threashold set to use the notifications it gives.
+         */
+        schedule_timeout_uninterruptible(1);
+
+        if (tries > 5) {
+                tries = 0;
+                return RC_PENUP;
+        }
+
+        x = MODR;
+        if (x == last) {
+                tries++;
+                return RC_AGAIN;
+        }
+        last = x;
+        do {
+                if (reads)
+                        x = MODR;
+                y = MODR;
+                if (pressure)
+                        p = MODR;
+
+                /* are samples valid */
+                if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
+                    (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
+                    (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+                        goto up;
+
+                /* coordinate is good */
+                tries = 0;
+                input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
+                input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
+                input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
+                input_sync(wm->input_dev);
+                reads++;
+        } while (reads < cinfo[sp_idx].reads);
+up:
+        return RC_PENDOWN | RC_AGAIN;
+}
+
+static int wm97xx_acc_startup(struct wm97xx *wm)
+{
+        int idx = 0;
+
+        /* check we have a codec */
+        if (wm->ac97 == NULL)
+                return -ENODEV;
+
+        /* Go you big red fire engine */
+        for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
+                if (wm->id != cinfo[idx].id)
+                        continue;
+                sp_idx = idx;
+                if (cont_rate <= cinfo[idx].speed)
+                        break;
+        }
+        wm->acc_rate = cinfo[sp_idx].code;
+        wm->acc_slot = ac97_touch_slot;
+        dev_info(wm->dev,
+                 "mainstone accelerated touchscreen driver, %d samples/sec\n",
+                 cinfo[sp_idx].speed);
+
+        /* codec specific irq config */
+        if (pen_int) {
+                switch (wm->id) {
+                case WM9705_ID2:
+                        wm->pen_irq = IRQ_GPIO(4);
+                        set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE);
+                        break;
+                case WM9712_ID2:
+                case WM9713_ID2:
+                        /* enable pen down interrupt */
+                        /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
+                        wm->pen_irq = MAINSTONE_AC97_IRQ;
+                        wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+                                           WM97XX_GPIO_POL_HIGH,
+                                           WM97XX_GPIO_STICKY,
+                                           WM97XX_GPIO_WAKE);
+                        wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
+                                           WM97XX_GPIO_POL_HIGH,
+                                           WM97XX_GPIO_NOTSTICKY,
+                                           WM97XX_GPIO_NOWAKE);
+                        break;
+                default:
+                        dev_err(wm->dev,
+                                "pen down irq not supported on this device\n");
+                        pen_int = 0;
+                        break;
+                }
+        }
+
+        return 0;
+}
+
+static void wm97xx_acc_shutdown(struct wm97xx *wm)
+{
+        /* codec specific deconfig */
+        if (pen_int) {
+                switch (wm->id & 0xffff) {
+                case WM9705_ID2:
+                        wm->pen_irq = 0;
+                        break;
+                case WM9712_ID2:
+                case WM9713_ID2:
+                        /* disable interrupt */
+                        wm->pen_irq = 0;
+                        break;
+                }
+        }
+}
+
+static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
+{
+        if (enable)
+                enable_irq(wm->pen_irq);
+        else
+                disable_irq(wm->pen_irq);
+}
+
+static struct wm97xx_mach_ops mainstone_mach_ops = {
+        .acc_enabled = 1,
+        .acc_pen_up = wm97xx_acc_pen_up,
+        .acc_pen_down = wm97xx_acc_pen_down,
+        .acc_startup = wm97xx_acc_startup,
+        .acc_shutdown = wm97xx_acc_shutdown,
+        .irq_enable = wm97xx_irq_enable,
+        .irq_gpio = WM97XX_GPIO_2,
+};
+
+static int mainstone_wm97xx_probe(struct platform_device *pdev)
+{
+        struct wm97xx *wm = platform_get_drvdata(pdev);
+
+        return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
+}
+
+static int mainstone_wm97xx_remove(struct platform_device *pdev)
+{
+        struct wm97xx *wm = platform_get_drvdata(pdev);
+
+        wm97xx_unregister_mach_ops(wm);
+        return 0;
+}
+
+static struct platform_driver mainstone_wm97xx_driver = {
+        .probe = mainstone_wm97xx_probe,
+        .remove = mainstone_wm97xx_remove,
+        .driver = {
+                .name = "wm97xx-touch",
+        },
+};
+
+static int __init mainstone_wm97xx_init(void)
+{
+        return platform_driver_register(&mainstone_wm97xx_driver);
+}
+
+static void __exit mainstone_wm97xx_exit(void)
+{
+        platform_driver_unregister(&mainstone_wm97xx_driver);
+}
+
+module_init(mainstone_wm97xx_init);
+module_exit(mainstone_wm97xx_exit);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
+MODULE_LICENSE("GPL");