Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 196 insertions, 0 deletions

diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
new file mode 100644
index 000000000000..ca4e96886627
--- /dev/null
+++ b/drivers/input/mouse/inport.c
@@ -0,0 +1,196 @@
+/*
+ * $Id: inport.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *      Teemu Rantanen          Derrick Cole
+ *      Peter Cervasio          Christoph Niemann
+ *      Philip Blundell         Russell King
+ *      Bob Harris
+ */
+
+/*
+ * Inport (ATI XL and Microsoft) busmouse driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/config.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Inport (ATI XL and Microsoft) busmouse driver");
+MODULE_LICENSE("GPL");
+
+#define INPORT_BASE             0x23c
+#define INPORT_EXTENT           4
+
+#define INPORT_CONTROL_PORT     INPORT_BASE + 0
+#define INPORT_DATA_PORT        INPORT_BASE + 1
+#define INPORT_SIGNATURE_PORT   INPORT_BASE + 2
+
+#define INPORT_REG_BTNS 0x00
+#define INPORT_REG_X            0x01
+#define INPORT_REG_Y            0x02
+#define INPORT_REG_MODE         0x07
+#define INPORT_RESET            0x80
+
+#ifdef CONFIG_INPUT_ATIXL
+#define INPORT_NAME             "ATI XL Mouse"
+#define INPORT_VENDOR           0x0002
+#define INPORT_SPEED_30HZ       0x01
+#define INPORT_SPEED_50HZ       0x02
+#define INPORT_SPEED_100HZ      0x03
+#define INPORT_SPEED_200HZ      0x04
+#define INPORT_MODE_BASE        INPORT_SPEED_100HZ
+#define INPORT_MODE_IRQ         0x08
+#else
+#define INPORT_NAME             "Microsoft InPort Mouse"
+#define INPORT_VENDOR           0x0001
+#define INPORT_MODE_BASE        0x10
+#define INPORT_MODE_IRQ         0x01
+#endif
+#define INPORT_MODE_HOLD        0x20
+
+#define INPORT_IRQ              5
+
+static int inport_irq = INPORT_IRQ;
+module_param_named(irq, inport_irq, uint, 0);
+MODULE_PARM_DESC(irq, "IRQ number (5=default)");
+
+__obsolete_setup("inport_irq=");
+
+static int inport_used;
+
+static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static int inport_open(struct input_dev *dev)
+{
+        if (!inport_used++) {
+                if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL))
+                        return -EBUSY;
+                outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+                outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+        }
+
+        return 0;
+}
+
+static void inport_close(struct input_dev *dev)
+{
+        if (!--inport_used) {
+                outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+                outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
+                free_irq(inport_irq, NULL);
+        }
+}
+
+static struct input_dev inport_dev = {
+        .evbit  = { BIT(EV_KEY) | BIT(EV_REL) },
+        .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
+        .relbit = { BIT(REL_X) | BIT(REL_Y) },
+        .open   = inport_open,
+        .close  = inport_close,
+        .name   = INPORT_NAME,
+        .phys   = "isa023c/input0",
+        .id = { 
+                .bustype = BUS_ISA,
+                .vendor  = INPORT_VENDOR,
+                .product = 0x0001,
+                .version = 0x0100,
+        },
+};
+
+static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+        unsigned char buttons;
+
+        outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+        outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+        input_regs(&inport_dev, regs);
+
+        outb(INPORT_REG_X, INPORT_CONTROL_PORT);
+        input_report_rel(&inport_dev, REL_X, inb(INPORT_DATA_PORT));
+
+        outb(INPORT_REG_Y, INPORT_CONTROL_PORT);
+        input_report_rel(&inport_dev, REL_Y, inb(INPORT_DATA_PORT));
+
+        outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT);
+        buttons = inb(INPORT_DATA_PORT);
+
+        input_report_key(&inport_dev, BTN_MIDDLE, buttons & 1);
+        input_report_key(&inport_dev, BTN_LEFT,   buttons & 2);
+        input_report_key(&inport_dev, BTN_RIGHT,  buttons & 4);
+
+        outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+        outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+        input_sync(&inport_dev);
+        return IRQ_HANDLED;
+}
+
+static int __init inport_init(void)
+{
+        unsigned char a,b,c;
+
+        if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) {
+                printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE);
+                return -EBUSY;
+        }
+
+        a = inb(INPORT_SIGNATURE_PORT);
+        b = inb(INPORT_SIGNATURE_PORT);
+        c = inb(INPORT_SIGNATURE_PORT);
+        if (( a == b ) || ( a != c )) {
+                release_region(INPORT_BASE, INPORT_EXTENT);
+                printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
+                return -ENODEV;
+        }
+
+        outb(INPORT_RESET, INPORT_CONTROL_PORT);
+        outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+        outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+        input_register_device(&inport_dev);
+
+        printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n", INPORT_BASE, inport_irq);
+
+        return 0;
+}
+
+static void __exit inport_exit(void)
+{
+        input_unregister_device(&inport_dev);
+        release_region(INPORT_BASE, INPORT_EXTENT);
+}
+
+module_init(inport_init);
+module_exit(inport_exit);