Merge commit 'v2.6.30-rc6' into perfcounters/core

Merge reason: this branch was on an -rc4 base, merge it up to -rc6
              to get the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 41 insertions, 7 deletions

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 6ab0eb1ada1c..4bc78892ba91 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1,7 +1,7 @@
 /*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
  *
- * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
         struct elantech_data *etd = psmouse->private;
         unsigned char *packet = psmouse->packet;
         int fingers;
+        static int old_fingers;
 
         if (etd->fw_version_maj == 0x01) {
                 /* byte 0:  D   U  p1  p2   1  p3   R   L
@@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
                 fingers = (packet[0] & 0xc0) >> 6;
         }
 
+        if (etd->jumpy_cursor) {
+                /* Discard packets that are likely to have bogus coordinates */
+                if (fingers > old_fingers) {
+                        elantech_debug("elantech.c: discarding packet\n");
+                        goto discard_packet_v1;
+                }
+        }
+
         input_report_key(dev, BTN_TOUCH, fingers != 0);
 
         /* byte 2: x7  x6  x5  x4  x3  x2  x1  x0
@@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
         }
 
         input_sync(dev);
+
+ discard_packet_v1:
+        old_fingers = fingers;
 }
 
 /*
@@ -363,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
                         rc = -1;
                         break;
                 }
+        }
+
+        if (rc == 0) {
                 /*
-                 * Read back reg 0x10. The touchpad is probably initalising
-                 * and not ready until we read back the value we just wrote.
+                 * Read back reg 0x10. For hardware version 1 we must make
+                 * sure the absolute mode bit is set. For hardware version 2
+                 * the touchpad is probably initalising and not ready until
+                 * we read back the value we just wrote.
                  */
                 do {
                         rc = elantech_read_reg(psmouse, 0x10, &val);
@@ -373,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
                                 break;
                         tries--;
                         elantech_debug("elantech.c: retrying read (%d).\n",
-                                tries);
+                                        tries);
                         msleep(ETP_READ_BACK_DELAY);
                 } while (tries > 0);
-                if (rc)
+
+                if (rc) {
                         pr_err("elantech.c: failed to read back register 0x10.\n");
-                break;
+                } else if (etd->hw_version == 1 &&
+                           !(val & ETP_R10_ABSOLUTE_MODE)) {
+                        pr_err("elantech.c: touchpad refuses "
+                                "to switch to absolute mode.\n");
+                        rc = -1;
+                }
         }
 
         if (rc)
@@ -662,6 +685,17 @@ int elantech_init(struct psmouse *psmouse)
                 param[0], param[1], param[2]);
         etd->capabilities = param[0];
 
+        /*
+         * This firmware seems to suffer from misreporting coordinates when
+         * a touch action starts causing the mouse cursor or scrolled page
+         * to jump. Enable a workaround.
+         */
+        if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
+                pr_info("elantech.c: firmware version 2.34 detected, "
+                        "enabling jumpy cursor workaround\n");
+                etd->jumpy_cursor = 1;
+        }
+
         if (elantech_set_absolute_mode(psmouse)) {
                 pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
                 goto init_fail;