Input: zaurus keyboard driver updates

  * Change the scan interval from 100ms to 50ms. This stops the key
    repeat from triggering on double letter presses.
  * Remove unneeded stale hinge code from corgikbd
  * Change unneeded corgi GPIO pins to inputs when suspended
  * Add support for the headphone jack switch for both corgi and spitz
    (as switch SW_2)

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

1 files changed, 9 insertions, 1 deletions

diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 83999d583122..bc61cf8cfc65 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -30,6 +30,7 @@
 #define SCANCODE(r,c)           (((r)<<4) + (c) + 1)
 #define NR_SCANCODES            ((KB_ROWS<<4) + 1)
 
+#define SCAN_INTERVAL           (50) /* ms */
 #define HINGE_SCAN_INTERVAL     (150) /* ms */
 
 #define SPITZ_KEY_CALENDER      KEY_F1
@@ -230,7 +231,7 @@ static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs
 
         /* if any keys are pressed, enable the timer */
         if (num_pressed)
-                mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(100));
+                mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL));
 
         spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
 }
@@ -287,6 +288,7 @@ static void spitzkbd_hinge_timer(unsigned long data)
         unsigned long flags;
 
         state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB));
+        state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT));
         if (state != sharpsl_hinge_state) {
                 hinge_count = 0;
                 sharpsl_hinge_state = state;
@@ -299,6 +301,7 @@ static void spitzkbd_hinge_timer(unsigned long data)
 
                 input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
                 input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+                input_report_switch(spitzkbd_data->input, SW_2, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
                 input_sync(spitzkbd_data->input);
 
                 spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
@@ -397,6 +400,7 @@ static int __init spitzkbd_probe(struct platform_device *dev)
         clear_bit(0, input_dev->keybit);
         set_bit(SW_0, input_dev->swbit);
         set_bit(SW_1, input_dev->swbit);
+        set_bit(SW_2, input_dev->swbit);
 
         input_register_device(input_dev);
 
@@ -432,6 +436,9 @@ static int __init spitzkbd_probe(struct platform_device *dev)
         request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
                     SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
                     "Spitzkbd SWB", spitzkbd);
+        request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
+                    SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+                    "Spitzkbd HP", spitzkbd);
 
         printk(KERN_INFO "input: Spitz Keyboard Registered\n");
 
@@ -450,6 +457,7 @@ static int spitzkbd_remove(struct platform_device *dev)
         free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd);
         free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd);
         free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd);
+        free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd);
 
         del_timer_sync(&spitzkbd->htimer);
         del_timer_sync(&spitzkbd->timer);