Input: add Atmel AT42QT1070 keypad driver

The AT42QT1070 QTouch sensor supports up to 7 keys.

The driver has been tested on Atmel AT91SAM9M10-G45-EK board, and it
 should work fine on other platforms.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

1 files changed, 276 insertions, 0 deletions

diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
new file mode 100644
index 000000000000..fba8404c7297
--- /dev/null
+++ b/drivers/input/keyboard/qt1070.c
@@ -0,0 +1,276 @@
+/*
+ *  Atmel AT42QT1070 QTouch Sensor Controller
+ *
+ *  Copyright (C) 2011 Atmel
+ *
+ *  Authors: Bo Shen <voice.shen@atmel.com>
+ *
+ *  Base on AT42QT2160 driver by:
+ *  Raphael Derosso Pereira <raphaelpereira@gmail.com>
+ *  Copyright (C) 2009
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+
+/* Address for each register */
+#define CHIP_ID            0x00
+#define QT1070_CHIP_ID     0x2E
+
+#define FW_VERSION         0x01
+#define QT1070_FW_VERSION  0x15
+
+#define DET_STATUS         0x02
+
+#define KEY_STATUS         0x03
+
+/* Calibrate */
+#define CALIBRATE_CMD      0x38
+#define QT1070_CAL_TIME    200
+
+/* Reset */
+#define RESET              0x39
+#define QT1070_RESET_TIME  255
+
+/* AT42QT1070 support up to 7 keys */
+static const unsigned short qt1070_key2code[] = {
+        KEY_0, KEY_1, KEY_2, KEY_3,
+        KEY_4, KEY_5, KEY_6,
+};
+
+struct qt1070_data {
+        struct i2c_client *client;
+        struct input_dev *input;
+        unsigned int irq;
+        unsigned short keycodes[ARRAY_SIZE(qt1070_key2code)];
+        u8 last_keys;
+};
+
+static int qt1070_read(struct i2c_client *client, u8 reg)
+{
+        int ret;
+
+        ret = i2c_smbus_read_byte_data(client, reg);
+        if (ret < 0)
+                dev_err(&client->dev,
+                        "can not read register, returned %d\n", ret);
+
+        return ret;
+}
+
+static int qt1070_write(struct i2c_client *client, u8 reg, u8 data)
+{
+        int ret;
+
+        ret = i2c_smbus_write_byte_data(client, reg, data);
+        if (ret < 0)
+                dev_err(&client->dev,
+                        "can not write register, returned %d\n", ret);
+
+        return ret;
+}
+
+static bool __devinit qt1070_identify(struct i2c_client *client)
+{
+        int id, ver;
+
+        /* Read Chip ID */
+        id = qt1070_read(client, CHIP_ID);
+        if (id != QT1070_CHIP_ID) {
+                dev_err(&client->dev, "ID %d not supported\n", id);
+                return false;
+        }
+
+        /* Read firmware version */
+        ver = qt1070_read(client, FW_VERSION);
+        if (ver < 0) {
+                dev_err(&client->dev, "could not read the firmware version\n");
+                return false;
+        }
+
+        dev_info(&client->dev, "AT42QT1070 firmware version %x\n", ver);
+
+        return true;
+}
+
+static irqreturn_t qt1070_interrupt(int irq, void *dev_id)
+{
+        struct qt1070_data *data = dev_id;
+        struct i2c_client *client = data->client;
+        struct input_dev *input = data->input;
+        int i;
+        u8 new_keys, keyval, mask = 0x01;
+
+        /* Read the detected status register, thus clearing interrupt */
+        qt1070_read(client, DET_STATUS);
+
+        /* Read which key changed */
+        new_keys = qt1070_read(client, KEY_STATUS);
+
+        for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) {
+                keyval = new_keys & mask;
+                if ((data->last_keys & mask) != keyval)
+                        input_report_key(input, data->keycodes[i], keyval);
+                mask <<= 1;
+        }
+        input_sync(input);
+
+        data->last_keys = new_keys;
+        return IRQ_HANDLED;
+}
+
+static int __devinit qt1070_probe(struct i2c_client *client,
+                                const struct i2c_device_id *id)
+{
+        struct qt1070_data *data;
+        struct input_dev *input;
+        int i;
+        int err;
+
+        err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE);
+        if (!err) {
+                dev_err(&client->dev, "%s adapter not supported\n",
+                        dev_driver_string(&client->adapter->dev));
+                return -ENODEV;
+        }
+
+        if (!client->irq) {
+                dev_err(&client->dev, "please assign the irq to this device\n");
+                return -EINVAL;
+        }
+
+        /* Identify the qt1070 chip */
+        if (!qt1070_identify(client))
+                return -ENODEV;
+
+        data = kzalloc(sizeof(struct qt1070_data), GFP_KERNEL);
+        input = input_allocate_device();
+        if (!data || !input) {
+                dev_err(&client->dev, "insufficient memory\n");
+                err = -ENOMEM;
+                goto err_free_mem;
+        }
+
+        data->client = client;
+        data->input = input;
+        data->irq = client->irq;
+
+        input->name = "AT42QT1070 QTouch Sensor";
+        input->dev.parent = &client->dev;
+        input->id.bustype = BUS_I2C;
+
+        /* Add the keycode */
+        input->keycode = data->keycodes;
+        input->keycodesize = sizeof(data->keycodes[0]);
+        input->keycodemax = ARRAY_SIZE(qt1070_key2code);
+
+        __set_bit(EV_KEY, input->evbit);
+
+        for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) {
+                data->keycodes[i] = qt1070_key2code[i];
+                __set_bit(qt1070_key2code[i], input->keybit);
+        }
+
+        /* Calibrate device */
+        qt1070_write(client, CALIBRATE_CMD, 1);
+        msleep(QT1070_CAL_TIME);
+
+        /* Soft reset */
+        qt1070_write(client, RESET, 1);
+        msleep(QT1070_RESET_TIME);
+
+        err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
+                IRQF_TRIGGER_NONE, client->dev.driver->name, data);
+        if (err) {
+                dev_err(&client->dev, "fail to request irq\n");
+                goto err_free_mem;
+        }
+
+        /* Register the input device */
+        err = input_register_device(data->input);
+        if (err) {
+                dev_err(&client->dev, "Failed to register input device\n");
+                goto err_free_irq;
+        }
+
+        i2c_set_clientdata(client, data);
+
+        /* Read to clear the chang line */
+        qt1070_read(client, DET_STATUS);
+
+        return 0;
+
+err_free_irq:
+        free_irq(client->irq, data);
+err_free_mem:
+        input_free_device(input);
+        kfree(data);
+        return err;
+}
+
+static int __devexit qt1070_remove(struct i2c_client *client)
+{
+        struct qt1070_data *data = i2c_get_clientdata(client);
+
+        /* Release IRQ */
+        free_irq(client->irq, data);
+
+        input_unregister_device(data->input);
+        kfree(data);
+
+        i2c_set_clientdata(client, NULL);
+
+        return 0;
+}
+
+static const struct i2c_device_id qt1070_id[] = {
+        { "qt1070", 0 },
+        { },
+};
+
+static struct i2c_driver qt1070_driver = {
+        .driver = {
+                .name   = "qt1070",
+                .owner  = THIS_MODULE,
+        },
+        .id_table       = qt1070_id,
+        .probe          = qt1070_probe,
+        .remove         = __devexit_p(qt1070_remove),
+};
+
+static int __init qt1070_init(void)
+{
+        return i2c_add_driver(&qt1070_driver);
+}
+module_init(qt1070_init);
+
+static void __exit qt1070_exit(void)
+{
+        i2c_del_driver(&qt1070_driver);
+}
+module_exit(qt1070_exit);
+
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("Driver for AT42QT1070 QTouch sensor");
+MODULE_LICENSE("GPL");