IPoIB/cm: Connected mode is no longer EXPERIMENTAL

Connected mode is now tested and used by lots of people.  No need to
hide it under CONFIG_EXPERIMENTAL.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 8 insertions, 7 deletions

diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
index 691525cf394a..ccc7180818a3 100644
--- a/drivers/infiniband/ulp/ipoib/Kconfig
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -11,16 +11,17 @@ config INFINIBAND_IPOIB
 
 config INFINIBAND_IPOIB_CM
         bool "IP-over-InfiniBand Connected Mode support"
-        depends on INFINIBAND_IPOIB && EXPERIMENTAL
+        depends on INFINIBAND_IPOIB
         default n
         ---help---
-          This option enables experimental support for IPoIB connected mode.
-          After enabling this option, you need to switch to connected mode through
-          /sys/class/net/ibXXX/mode to actually create connections, and then increase
-          the interface MTU with e.g. ifconfig ib0 mtu 65520.
+          This option enables support for IPoIB connected mode.  After
+          enabling this option, you need to switch to connected mode
+          through /sys/class/net/ibXXX/mode to actually create
+          connections, and then increase the interface MTU with
+          e.g. ifconfig ib0 mtu 65520.
 
-          WARNING: Enabling connected mode will trigger some
-          packet drops for multicast and UD mode traffic from this interface,
+          WARNING: Enabling connected mode will trigger some packet
+          drops for multicast and UD mode traffic from this interface,
           unless you limit mtu for these destinations to 2044.
 
 config INFINIBAND_IPOIB_DEBUG