[PATCH] Get rid of struct request request_pm_state member

The IDE power management can just use the ->end_io_data member to store
it's data.

Signed-off-by: Jens Axboe <axboe@suse.de>

2 files changed, 54 insertions, 41 deletions

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index c01615dec202..4f2f138de2ca 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -142,38 +142,41 @@ enum {
 
 static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
 {
+        struct request_pm_state *pm = rq->end_io_data;
+
         if (drive->media != ide_disk)
                 return;
 
-        switch (rq->pm->pm_step) {
+        switch (pm->pm_step) {
         case ide_pm_flush_cache:        /* Suspend step 1 (flush cache) complete */
-                if (rq->pm->pm_state == PM_EVENT_FREEZE)
-                        rq->pm->pm_step = ide_pm_state_completed;
+                if (pm->pm_state == PM_EVENT_FREEZE)
+                        pm->pm_step = ide_pm_state_completed;
                 else
-                        rq->pm->pm_step = idedisk_pm_standby;
+                        pm->pm_step = idedisk_pm_standby;
                 break;
         case idedisk_pm_standby:        /* Suspend step 2 (standby) complete */
-                rq->pm->pm_step = ide_pm_state_completed;
+                pm->pm_step = ide_pm_state_completed;
                 break;
         case idedisk_pm_idle:           /* Resume step 1 (idle) complete */
-                rq->pm->pm_step = ide_pm_restore_dma;
+                pm->pm_step = ide_pm_restore_dma;
                 break;
         }
 }
 
 static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 {
+        struct request_pm_state *pm = rq->end_io_data;
         ide_task_t *args = rq->special;
 
         memset(args, 0, sizeof(*args));
 
         if (drive->media != ide_disk) {
                 /* skip idedisk_pm_idle for ATAPI devices */
-                if (rq->pm->pm_step == idedisk_pm_idle)
-                        rq->pm->pm_step = ide_pm_restore_dma;
+                if (pm->pm_step == idedisk_pm_idle)
+                        pm->pm_step = ide_pm_restore_dma;
         }
 
-        switch (rq->pm->pm_step) {
+        switch (pm->pm_step) {
         case ide_pm_flush_cache:        /* Suspend step 1 (flush cache) */
                 if (drive->media != ide_disk)
                         break;
@@ -215,7 +218,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
                 drive->hwif->ide_dma_check(drive);
                 break;
         }
-        rq->pm->pm_step = ide_pm_state_completed;
+        pm->pm_step = ide_pm_state_completed;
         return ide_stopped;
 }
 
@@ -362,12 +365,13 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
                         }
                 }
         } else if (blk_pm_request(rq)) {
+                struct request_pm_state *pm = rq->end_io_data;
 #ifdef DEBUG_PM
                 printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",
                         drive->name, rq->pm->pm_step, stat, err);
 #endif
                 ide_complete_power_step(drive, rq, stat, err);
-                if (rq->pm->pm_step == ide_pm_state_completed)
+                if (pm->pm_step == ide_pm_state_completed)
                         ide_complete_pm_request(drive, rq);
                 return;
         }
@@ -871,6 +875,39 @@ done:
         return ide_stopped;
 }
 
+static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
+{
+        struct request_pm_state *pm = rq->end_io_data;
+
+        if (blk_pm_suspend_request(rq) &&
+            pm->pm_step == ide_pm_state_start_suspend)
+                /* Mark drive blocked when starting the suspend sequence. */
+                drive->blocked = 1;
+        else if (blk_pm_resume_request(rq) &&
+                 pm->pm_step == ide_pm_state_start_resume) {
+                /* 
+                 * The first thing we do on wakeup is to wait for BSY bit to
+                 * go away (with a looong timeout) as a drive on this hwif may
+                 * just be POSTing itself.
+                 * We do that before even selecting as the "other" device on
+                 * the bus may be broken enough to walk on our toes at this
+                 * point.
+                 */
+                int rc;
+#ifdef DEBUG_PM
+                printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
+#endif
+                rc = ide_wait_not_busy(HWIF(drive), 35000);
+                if (rc)
+                        printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
+                SELECT_DRIVE(drive);
+                HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]);
+                rc = ide_wait_not_busy(HWIF(drive), 10000);
+                if (rc)
+                        printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+        }
+}
+
 /**
  *      start_request   -       start of I/O and command issuing for IDE
  *
@@ -909,33 +946,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
         if (block == 0 && drive->remap_0_to_1 == 1)
                 block = 1;  /* redirect MBR access to EZ-Drive partn table */
 
-        if (blk_pm_suspend_request(rq) &&
-            rq->pm->pm_step == ide_pm_state_start_suspend)
-                /* Mark drive blocked when starting the suspend sequence. */
-                drive->blocked = 1;
-        else if (blk_pm_resume_request(rq) &&
-                 rq->pm->pm_step == ide_pm_state_start_resume) {
-                /* 
-                 * The first thing we do on wakeup is to wait for BSY bit to
-                 * go away (with a looong timeout) as a drive on this hwif may
-                 * just be POSTing itself.
-                 * We do that before even selecting as the "other" device on
-                 * the bus may be broken enough to walk on our toes at this
-                 * point.
-                 */
-                int rc;
-#ifdef DEBUG_PM
-                printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
-#endif
-                rc = ide_wait_not_busy(HWIF(drive), 35000);
-                if (rc)
-                        printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
-                SELECT_DRIVE(drive);
-                HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]);
-                rc = ide_wait_not_busy(HWIF(drive), 10000);
-                if (rc)
-                        printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
-        }
+        if (blk_pm_request(rq))
+                ide_check_pm_state(drive, rq);
 
         SELECT_DRIVE(drive);
         if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) {
@@ -950,13 +962,14 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
                 else if (rq->flags & REQ_DRIVE_TASKFILE)
                         return execute_drive_cmd(drive, rq);
                 else if (blk_pm_request(rq)) {
+                        struct request_pm_state *pm = rq->end_io_data;
 #ifdef DEBUG_PM
                         printk("%s: start_power_step(step: %d)\n",
                                 drive->name, rq->pm->pm_step);
 #endif
                         startstop = ide_start_power_step(drive, rq);
                         if (startstop == ide_stopped &&
-                            rq->pm->pm_step == ide_pm_state_completed)
+                            pm->pm_step == ide_pm_state_completed)
                                 ide_complete_pm_request(drive, rq);
                         return startstop;
                 }
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 9799aed772e1..59fe358048b3 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1226,7 +1226,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t state)
         memset(&args, 0, sizeof(args));
         rq.flags = REQ_PM_SUSPEND;
         rq.special = &args;
-        rq.pm = &rqpm;
+        rq.end_io_data = &rqpm;
         rqpm.pm_step = ide_pm_state_start_suspend;
         rqpm.pm_state = state.event;
 
@@ -1245,7 +1245,7 @@ static int generic_ide_resume(struct device *dev)
         memset(&args, 0, sizeof(args));
         rq.flags = REQ_PM_RESUME;
         rq.special = &args;
-        rq.pm = &rqpm;
+        rq.end_io_data = &rqpm;
         rqpm.pm_step = ide_pm_state_start_resume;
         rqpm.pm_state = PM_EVENT_ON;