aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ide
diff options
context:
space:
mode:
authorDaniel Axtens <dja@axtens.net>2015-04-14 01:23:25 -0400
committerTejun Heo <tj@kernel.org>2015-04-14 13:07:17 -0400
commit5df07b74f671d1dfc1d81c3e791c335183cfc515 (patch)
treeaa1f371c56a3edcd80de2965f16d8b32e879d3d7 /drivers/ide
parent31f7dc796998d2967e999a0f9229d8a50c7b348d (diff)
Remove celleb-only SCC PATA drivers
The SCC PATA interface is only used by celleb. celleb has been dropped [1], so drop the drivers. [1] http://patchwork.ozlabs.org/patch/451730/ CC: "David S. Miller" <davem@davemloft.net> CC: linux-ide@vger.kernel.org CC: Valentin Rothberg <valentinrothberg@gmail.com> CC: mpe@ellerman.id.au CC: linuxppc-dev@lists.ozlab.org Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/Kconfig9
-rw-r--r--drivers/ide/Makefile1
-rw-r--r--drivers/ide/scc_pata.c887
3 files changed, 0 insertions, 897 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index a04c49f2a011..39ea67f9b066 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -643,15 +643,6 @@ config BLK_DEV_TC86C001
643 help 643 help
644 This driver adds support for Toshiba TC86C001 GOKU-S chip. 644 This driver adds support for Toshiba TC86C001 GOKU-S chip.
645 645
646config BLK_DEV_CELLEB
647 tristate "Toshiba's Cell Reference Set IDE support"
648 depends on PPC_CELLEB
649 select BLK_DEV_IDEDMA_PCI
650 help
651 This driver provides support for the on-board IDE controller on
652 Toshiba Cell Reference Board.
653 If unsure, say Y.
654
655endif 646endif
656 647
657# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF 648# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index a04ee82f1c8f..2a8c417d4081 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o
38obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o 38obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o
39obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o 39obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o
40obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o 40obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o
41obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o
42obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o 41obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o
43obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o 42obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o
44obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o 43obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
deleted file mode 100644
index 2a2d188b5d5b..000000000000
--- a/drivers/ide/scc_pata.c
+++ /dev/null
@@ -1,887 +0,0 @@
1/*
2 * Support for IDE interfaces on Celleb platform
3 *
4 * (C) Copyright 2006 TOSHIBA CORPORATION
5 *
6 * This code is based on drivers/ide/pci/siimage.c:
7 * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
8 * Copyright (C) 2003 Red Hat
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License along
21 * with this program; if not, write to the Free Software Foundation, Inc.,
22 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
23 */
24
25#include <linux/types.h>
26#include <linux/module.h>
27#include <linux/pci.h>
28#include <linux/delay.h>
29#include <linux/ide.h>
30#include <linux/init.h>
31
32#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
33
34#define SCC_PATA_NAME "scc IDE"
35
36#define TDVHSEL_MASTER 0x00000001
37#define TDVHSEL_SLAVE 0x00000004
38
39#define MODE_JCUSFEN 0x00000080
40
41#define CCKCTRL_ATARESET 0x00040000
42#define CCKCTRL_BUFCNT 0x00020000
43#define CCKCTRL_CRST 0x00010000
44#define CCKCTRL_OCLKEN 0x00000100
45#define CCKCTRL_ATACLKOEN 0x00000002
46#define CCKCTRL_LCLKEN 0x00000001
47
48#define QCHCD_IOS_SS 0x00000001
49
50#define QCHSD_STPDIAG 0x00020000
51
52#define INTMASK_MSK 0xD1000012
53#define INTSTS_SERROR 0x80000000
54#define INTSTS_PRERR 0x40000000
55#define INTSTS_RERR 0x10000000
56#define INTSTS_ICERR 0x01000000
57#define INTSTS_BMSINT 0x00000010
58#define INTSTS_BMHE 0x00000008
59#define INTSTS_IOIRQS 0x00000004
60#define INTSTS_INTRQ 0x00000002
61#define INTSTS_ACTEINT 0x00000001
62
63#define ECMODE_VALUE 0x01
64
65static struct scc_ports {
66 unsigned long ctl, dma;
67 struct ide_host *host; /* for removing port from system */
68} scc_ports[MAX_HWIFS];
69
70/* PIO transfer mode table */
71/* JCHST */
72static unsigned long JCHSTtbl[2][7] = {
73 {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
74 {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
75};
76
77/* JCHHT */
78static unsigned long JCHHTtbl[2][7] = {
79 {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
80 {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
81};
82
83/* JCHCT */
84static unsigned long JCHCTtbl[2][7] = {
85 {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
86 {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
87};
88
89
90/* DMA transfer mode table */
91/* JCHDCTM/JCHDCTS */
92static unsigned long JCHDCTxtbl[2][7] = {
93 {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
94 {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
95};
96
97/* JCSTWTM/JCSTWTS */
98static unsigned long JCSTWTxtbl[2][7] = {
99 {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
100 {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
101};
102
103/* JCTSS */
104static unsigned long JCTSStbl[2][7] = {
105 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
106 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
107};
108
109/* JCENVT */
110static unsigned long JCENVTtbl[2][7] = {
111 {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
112 {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
113};
114
115/* JCACTSELS/JCACTSELM */
116static unsigned long JCACTSELtbl[2][7] = {
117 {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
118 {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
119};
120
121
122static u8 scc_ide_inb(unsigned long port)
123{
124 u32 data = in_be32((void*)port);
125 return (u8)data;
126}
127
128static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
129{
130 out_be32((void *)hwif->io_ports.command_addr, cmd);
131 eieio();
132 in_be32((void *)(hwif->dma_base + 0x01c));
133 eieio();
134}
135
136static u8 scc_read_status(ide_hwif_t *hwif)
137{
138 return (u8)in_be32((void *)hwif->io_ports.status_addr);
139}
140
141static u8 scc_read_altstatus(ide_hwif_t *hwif)
142{
143 return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
144}
145
146static u8 scc_dma_sff_read_status(ide_hwif_t *hwif)
147{
148 return (u8)in_be32((void *)(hwif->dma_base + 4));
149}
150
151static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl)
152{
153 out_be32((void *)hwif->io_ports.ctl_addr, ctl);
154 eieio();
155 in_be32((void *)(hwif->dma_base + 0x01c));
156 eieio();
157}
158
159static void scc_ide_insw(unsigned long port, void *addr, u32 count)
160{
161 u16 *ptr = (u16 *)addr;
162 while (count--) {
163 *ptr++ = le16_to_cpu(in_be32((void*)port));
164 }
165}
166
167static void scc_ide_insl(unsigned long port, void *addr, u32 count)
168{
169 u16 *ptr = (u16 *)addr;
170 while (count--) {
171 *ptr++ = le16_to_cpu(in_be32((void*)port));
172 *ptr++ = le16_to_cpu(in_be32((void*)port));
173 }
174}
175
176static void scc_ide_outb(u8 addr, unsigned long port)
177{
178 out_be32((void*)port, addr);
179}
180
181static void
182scc_ide_outsw(unsigned long port, void *addr, u32 count)
183{
184 u16 *ptr = (u16 *)addr;
185 while (count--) {
186 out_be32((void*)port, cpu_to_le16(*ptr++));
187 }
188}
189
190static void
191scc_ide_outsl(unsigned long port, void *addr, u32 count)
192{
193 u16 *ptr = (u16 *)addr;
194 while (count--) {
195 out_be32((void*)port, cpu_to_le16(*ptr++));
196 out_be32((void*)port, cpu_to_le16(*ptr++));
197 }
198}
199
200/**
201 * scc_set_pio_mode - set host controller for PIO mode
202 * @hwif: port
203 * @drive: drive
204 *
205 * Load the timing settings for this device mode into the
206 * controller.
207 */
208
209static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
210{
211 struct scc_ports *ports = ide_get_hwifdata(hwif);
212 unsigned long ctl_base = ports->ctl;
213 unsigned long cckctrl_port = ctl_base + 0xff0;
214 unsigned long piosht_port = ctl_base + 0x000;
215 unsigned long pioct_port = ctl_base + 0x004;
216 unsigned long reg;
217 int offset;
218 const u8 pio = drive->pio_mode - XFER_PIO_0;
219
220 reg = in_be32((void __iomem *)cckctrl_port);
221 if (reg & CCKCTRL_ATACLKOEN) {
222 offset = 1; /* 133MHz */
223 } else {
224 offset = 0; /* 100MHz */
225 }
226 reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
227 out_be32((void __iomem *)piosht_port, reg);
228 reg = JCHCTtbl[offset][pio];
229 out_be32((void __iomem *)pioct_port, reg);
230}
231
232/**
233 * scc_set_dma_mode - set host controller for DMA mode
234 * @hwif: port
235 * @drive: drive
236 *
237 * Load the timing settings for this device mode into the
238 * controller.
239 */
240
241static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
242{
243 struct scc_ports *ports = ide_get_hwifdata(hwif);
244 unsigned long ctl_base = ports->ctl;
245 unsigned long cckctrl_port = ctl_base + 0xff0;
246 unsigned long mdmact_port = ctl_base + 0x008;
247 unsigned long mcrcst_port = ctl_base + 0x00c;
248 unsigned long sdmact_port = ctl_base + 0x010;
249 unsigned long scrcst_port = ctl_base + 0x014;
250 unsigned long udenvt_port = ctl_base + 0x018;
251 unsigned long tdvhsel_port = ctl_base + 0x020;
252 int is_slave = drive->dn & 1;
253 int offset, idx;
254 unsigned long reg;
255 unsigned long jcactsel;
256 const u8 speed = drive->dma_mode;
257
258 reg = in_be32((void __iomem *)cckctrl_port);
259 if (reg & CCKCTRL_ATACLKOEN) {
260 offset = 1; /* 133MHz */
261 } else {
262 offset = 0; /* 100MHz */
263 }
264
265 idx = speed - XFER_UDMA_0;
266
267 jcactsel = JCACTSELtbl[offset][idx];
268 if (is_slave) {
269 out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
270 out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
271 jcactsel = jcactsel << 2;
272 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
273 } else {
274 out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
275 out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
276 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
277 }
278 reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
279 out_be32((void __iomem *)udenvt_port, reg);
280}
281
282static void scc_dma_host_set(ide_drive_t *drive, int on)
283{
284 ide_hwif_t *hwif = drive->hwif;
285 u8 unit = drive->dn & 1;
286 u8 dma_stat = scc_dma_sff_read_status(hwif);
287
288 if (on)
289 dma_stat |= (1 << (5 + unit));
290 else
291 dma_stat &= ~(1 << (5 + unit));
292
293 scc_ide_outb(dma_stat, hwif->dma_base + 4);
294}
295
296/**
297 * scc_dma_setup - begin a DMA phase
298 * @drive: target device
299 * @cmd: command
300 *
301 * Build an IDE DMA PRD (IDE speak for scatter gather table)
302 * and then set up the DMA transfer registers.
303 *
304 * Returns 0 on success. If a PIO fallback is required then 1
305 * is returned.
306 */
307
308static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
309{
310 ide_hwif_t *hwif = drive->hwif;
311 u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
312 u8 dma_stat;
313
314 /* fall back to pio! */
315 if (ide_build_dmatable(drive, cmd) == 0)
316 return 1;
317
318 /* PRD table */
319 out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
320
321 /* specify r/w */
322 out_be32((void __iomem *)hwif->dma_base, rw);
323
324 /* read DMA status for INTR & ERROR flags */
325 dma_stat = scc_dma_sff_read_status(hwif);
326
327 /* clear INTR & ERROR flags */
328 out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
329
330 return 0;
331}
332
333static void scc_dma_start(ide_drive_t *drive)
334{
335 ide_hwif_t *hwif = drive->hwif;
336 u8 dma_cmd = scc_ide_inb(hwif->dma_base);
337
338 /* start DMA */
339 scc_ide_outb(dma_cmd | 1, hwif->dma_base);
340}
341
342static int __scc_dma_end(ide_drive_t *drive)
343{
344 ide_hwif_t *hwif = drive->hwif;
345 u8 dma_stat, dma_cmd;
346
347 /* get DMA command mode */
348 dma_cmd = scc_ide_inb(hwif->dma_base);
349 /* stop DMA */
350 scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
351 /* get DMA status */
352 dma_stat = scc_dma_sff_read_status(hwif);
353 /* clear the INTR & ERROR bits */
354 scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
355 /* verify good DMA status */
356 return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
357}
358
359/**
360 * scc_dma_end - Stop DMA
361 * @drive: IDE drive
362 *
363 * Check and clear INT Status register.
364 * Then call __scc_dma_end().
365 */
366
367static int scc_dma_end(ide_drive_t *drive)
368{
369 ide_hwif_t *hwif = drive->hwif;
370 void __iomem *dma_base = (void __iomem *)hwif->dma_base;
371 unsigned long intsts_port = hwif->dma_base + 0x014;
372 u32 reg;
373 int dma_stat, data_loss = 0;
374 static int retry = 0;
375
376 /* errata A308 workaround: Step5 (check data loss) */
377 /* We don't check non ide_disk because it is limited to UDMA4 */
378 if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
379 & ATA_ERR) &&
380 drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
381 reg = in_be32((void __iomem *)intsts_port);
382 if (!(reg & INTSTS_ACTEINT)) {
383 printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
384 drive->name);
385 data_loss = 1;
386 if (retry++) {
387 struct request *rq = hwif->rq;
388 ide_drive_t *drive;
389 int i;
390
391 /* ERROR_RESET and drive->crc_count are needed
392 * to reduce DMA transfer mode in retry process.
393 */
394 if (rq)
395 rq->errors |= ERROR_RESET;
396
397 ide_port_for_each_dev(i, drive, hwif)
398 drive->crc_count++;
399 }
400 }
401 }
402
403 while (1) {
404 reg = in_be32((void __iomem *)intsts_port);
405
406 if (reg & INTSTS_SERROR) {
407 printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
408 out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
409
410 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
411 continue;
412 }
413
414 if (reg & INTSTS_PRERR) {
415 u32 maea0, maec0;
416 unsigned long ctl_base = hwif->config_data;
417
418 maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
419 maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
420
421 printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
422
423 out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
424
425 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
426 continue;
427 }
428
429 if (reg & INTSTS_RERR) {
430 printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
431 out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
432
433 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
434 continue;
435 }
436
437 if (reg & INTSTS_ICERR) {
438 out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
439
440 printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
441 out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
442 continue;
443 }
444
445 if (reg & INTSTS_BMSINT) {
446 printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
447 out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
448
449 ide_do_reset(drive);
450 continue;
451 }
452
453 if (reg & INTSTS_BMHE) {
454 out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
455 continue;
456 }
457
458 if (reg & INTSTS_ACTEINT) {
459 out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
460 continue;
461 }
462
463 if (reg & INTSTS_IOIRQS) {
464 out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
465 continue;
466 }
467 break;
468 }
469
470 dma_stat = __scc_dma_end(drive);
471 if (data_loss)
472 dma_stat |= 2; /* emulate DMA error (to retry command) */
473 return dma_stat;
474}
475
476/* returns 1 if dma irq issued, 0 otherwise */
477static int scc_dma_test_irq(ide_drive_t *drive)
478{
479 ide_hwif_t *hwif = drive->hwif;
480 u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
481
482 /* SCC errata A252,A308 workaround: Step4 */
483 if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
484 & ATA_ERR) &&
485 (int_stat & INTSTS_INTRQ))
486 return 1;
487
488 /* SCC errata A308 workaround: Step5 (polling IOIRQS) */
489 if (int_stat & INTSTS_IOIRQS)
490 return 1;
491
492 return 0;
493}
494
495static u8 scc_udma_filter(ide_drive_t *drive)
496{
497 ide_hwif_t *hwif = drive->hwif;
498 u8 mask = hwif->ultra_mask;
499
500 /* errata A308 workaround: limit non ide_disk drive to UDMA4 */
501 if ((drive->media != ide_disk) && (mask & 0xE0)) {
502 printk(KERN_INFO "%s: limit %s to UDMA4\n",
503 SCC_PATA_NAME, drive->name);
504 mask = ATA_UDMA4;
505 }
506
507 return mask;
508}
509
510/**
511 * setup_mmio_scc - map CTRL/BMID region
512 * @dev: PCI device we are configuring
513 * @name: device name
514 *
515 */
516
517static int setup_mmio_scc (struct pci_dev *dev, const char *name)
518{
519 void __iomem *ctl_addr;
520 void __iomem *dma_addr;
521 int i, ret;
522
523 for (i = 0; i < MAX_HWIFS; i++) {
524 if (scc_ports[i].ctl == 0)
525 break;
526 }
527 if (i >= MAX_HWIFS)
528 return -ENOMEM;
529
530 ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
531 if (ret < 0) {
532 printk(KERN_ERR "%s: can't reserve resources\n", name);
533 return ret;
534 }
535
536 ctl_addr = pci_ioremap_bar(dev, 0);
537 if (!ctl_addr)
538 goto fail_0;
539
540 dma_addr = pci_ioremap_bar(dev, 1);
541 if (!dma_addr)
542 goto fail_1;
543
544 pci_set_master(dev);
545 scc_ports[i].ctl = (unsigned long)ctl_addr;
546 scc_ports[i].dma = (unsigned long)dma_addr;
547 pci_set_drvdata(dev, (void *) &scc_ports[i]);
548
549 return 1;
550
551 fail_1:
552 iounmap(ctl_addr);
553 fail_0:
554 return -ENOMEM;
555}
556
557static int scc_ide_setup_pci_device(struct pci_dev *dev,
558 const struct ide_port_info *d)
559{
560 struct scc_ports *ports = pci_get_drvdata(dev);
561 struct ide_host *host;
562 struct ide_hw hw, *hws[] = { &hw };
563 int i, rc;
564
565 memset(&hw, 0, sizeof(hw));
566 for (i = 0; i <= 8; i++)
567 hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
568 hw.irq = dev->irq;
569 hw.dev = &dev->dev;
570
571 rc = ide_host_add(d, hws, 1, &host);
572 if (rc)
573 return rc;
574
575 ports->host = host;
576
577 return 0;
578}
579
580/**
581 * init_setup_scc - set up an SCC PATA Controller
582 * @dev: PCI device
583 * @d: IDE port info
584 *
585 * Perform the initial set up for this device.
586 */
587
588static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d)
589{
590 unsigned long ctl_base;
591 unsigned long dma_base;
592 unsigned long cckctrl_port;
593 unsigned long intmask_port;
594 unsigned long mode_port;
595 unsigned long ecmode_port;
596 u32 reg = 0;
597 struct scc_ports *ports;
598 int rc;
599
600 rc = pci_enable_device(dev);
601 if (rc)
602 goto end;
603
604 rc = setup_mmio_scc(dev, d->name);
605 if (rc < 0)
606 goto end;
607
608 ports = pci_get_drvdata(dev);
609 ctl_base = ports->ctl;
610 dma_base = ports->dma;
611 cckctrl_port = ctl_base + 0xff0;
612 intmask_port = dma_base + 0x010;
613 mode_port = ctl_base + 0x024;
614 ecmode_port = ctl_base + 0xf00;
615
616 /* controller initialization */
617 reg = 0;
618 out_be32((void*)cckctrl_port, reg);
619 reg |= CCKCTRL_ATACLKOEN;
620 out_be32((void*)cckctrl_port, reg);
621 reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
622 out_be32((void*)cckctrl_port, reg);
623 reg |= CCKCTRL_CRST;
624 out_be32((void*)cckctrl_port, reg);
625
626 for (;;) {
627 reg = in_be32((void*)cckctrl_port);
628 if (reg & CCKCTRL_CRST)
629 break;
630 udelay(5000);
631 }
632
633 reg |= CCKCTRL_ATARESET;
634 out_be32((void*)cckctrl_port, reg);
635
636 out_be32((void*)ecmode_port, ECMODE_VALUE);
637 out_be32((void*)mode_port, MODE_JCUSFEN);
638 out_be32((void*)intmask_port, INTMASK_MSK);
639
640 rc = scc_ide_setup_pci_device(dev, d);
641
642 end:
643 return rc;
644}
645
646static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
647{
648 struct ide_io_ports *io_ports = &drive->hwif->io_ports;
649
650 if (valid & IDE_VALID_FEATURE)
651 scc_ide_outb(tf->feature, io_ports->feature_addr);
652 if (valid & IDE_VALID_NSECT)
653 scc_ide_outb(tf->nsect, io_ports->nsect_addr);
654 if (valid & IDE_VALID_LBAL)
655 scc_ide_outb(tf->lbal, io_ports->lbal_addr);
656 if (valid & IDE_VALID_LBAM)
657 scc_ide_outb(tf->lbam, io_ports->lbam_addr);
658 if (valid & IDE_VALID_LBAH)
659 scc_ide_outb(tf->lbah, io_ports->lbah_addr);
660 if (valid & IDE_VALID_DEVICE)
661 scc_ide_outb(tf->device, io_ports->device_addr);
662}
663
664static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
665{
666 struct ide_io_ports *io_ports = &drive->hwif->io_ports;
667
668 if (valid & IDE_VALID_ERROR)
669 tf->error = scc_ide_inb(io_ports->feature_addr);
670 if (valid & IDE_VALID_NSECT)
671 tf->nsect = scc_ide_inb(io_ports->nsect_addr);
672 if (valid & IDE_VALID_LBAL)
673 tf->lbal = scc_ide_inb(io_ports->lbal_addr);
674 if (valid & IDE_VALID_LBAM)
675 tf->lbam = scc_ide_inb(io_ports->lbam_addr);
676 if (valid & IDE_VALID_LBAH)
677 tf->lbah = scc_ide_inb(io_ports->lbah_addr);
678 if (valid & IDE_VALID_DEVICE)
679 tf->device = scc_ide_inb(io_ports->device_addr);
680}
681
682static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
683 void *buf, unsigned int len)
684{
685 unsigned long data_addr = drive->hwif->io_ports.data_addr;
686
687 len++;
688
689 if (drive->io_32bit) {
690 scc_ide_insl(data_addr, buf, len / 4);
691
692 if ((len & 3) >= 2)
693 scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
694 } else
695 scc_ide_insw(data_addr, buf, len / 2);
696}
697
698static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
699 void *buf, unsigned int len)
700{
701 unsigned long data_addr = drive->hwif->io_ports.data_addr;
702
703 len++;
704
705 if (drive->io_32bit) {
706 scc_ide_outsl(data_addr, buf, len / 4);
707
708 if ((len & 3) >= 2)
709 scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
710 } else
711 scc_ide_outsw(data_addr, buf, len / 2);
712}
713
714/**
715 * init_mmio_iops_scc - set up the iops for MMIO
716 * @hwif: interface to set up
717 *
718 */
719
720static void init_mmio_iops_scc(ide_hwif_t *hwif)
721{
722 struct pci_dev *dev = to_pci_dev(hwif->dev);
723 struct scc_ports *ports = pci_get_drvdata(dev);
724 unsigned long dma_base = ports->dma;
725
726 ide_set_hwifdata(hwif, ports);
727
728 hwif->dma_base = dma_base;
729 hwif->config_data = ports->ctl;
730}
731
732/**
733 * init_iops_scc - set up iops
734 * @hwif: interface to set up
735 *
736 * Do the basic setup for the SCC hardware interface
737 * and then do the MMIO setup.
738 */
739
740static void init_iops_scc(ide_hwif_t *hwif)
741{
742 struct pci_dev *dev = to_pci_dev(hwif->dev);
743
744 hwif->hwif_data = NULL;
745 if (pci_get_drvdata(dev) == NULL)
746 return;
747 init_mmio_iops_scc(hwif);
748}
749
750static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
751{
752 return ide_allocate_dma_engine(hwif);
753}
754
755static u8 scc_cable_detect(ide_hwif_t *hwif)
756{
757 return ATA_CBL_PATA80;
758}
759
760/**
761 * init_hwif_scc - set up hwif
762 * @hwif: interface to set up
763 *
764 * We do the basic set up of the interface structure. The SCC
765 * requires several custom handlers so we override the default
766 * ide DMA handlers appropriately.
767 */
768
769static void init_hwif_scc(ide_hwif_t *hwif)
770{
771 /* PTERADD */
772 out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
773
774 if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
775 hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
776 else
777 hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
778}
779
780static const struct ide_tp_ops scc_tp_ops = {
781 .exec_command = scc_exec_command,
782 .read_status = scc_read_status,
783 .read_altstatus = scc_read_altstatus,
784 .write_devctl = scc_write_devctl,
785
786 .dev_select = ide_dev_select,
787 .tf_load = scc_tf_load,
788 .tf_read = scc_tf_read,
789
790 .input_data = scc_input_data,
791 .output_data = scc_output_data,
792};
793
794static const struct ide_port_ops scc_port_ops = {
795 .set_pio_mode = scc_set_pio_mode,
796 .set_dma_mode = scc_set_dma_mode,
797 .udma_filter = scc_udma_filter,
798 .cable_detect = scc_cable_detect,
799};
800
801static const struct ide_dma_ops scc_dma_ops = {
802 .dma_host_set = scc_dma_host_set,
803 .dma_setup = scc_dma_setup,
804 .dma_start = scc_dma_start,
805 .dma_end = scc_dma_end,
806 .dma_test_irq = scc_dma_test_irq,
807 .dma_lost_irq = ide_dma_lost_irq,
808 .dma_timer_expiry = ide_dma_sff_timer_expiry,
809 .dma_sff_read_status = scc_dma_sff_read_status,
810};
811
812static const struct ide_port_info scc_chipset = {
813 .name = "sccIDE",
814 .init_iops = init_iops_scc,
815 .init_dma = scc_init_dma,
816 .init_hwif = init_hwif_scc,
817 .tp_ops = &scc_tp_ops,
818 .port_ops = &scc_port_ops,
819 .dma_ops = &scc_dma_ops,
820 .host_flags = IDE_HFLAG_SINGLE,
821 .irq_flags = IRQF_SHARED,
822 .pio_mask = ATA_PIO4,
823 .chipset = ide_pci,
824};
825
826/**
827 * scc_init_one - pci layer discovery entry
828 * @dev: PCI device
829 * @id: ident table entry
830 *
831 * Called by the PCI code when it finds an SCC PATA controller.
832 * We then use the IDE PCI generic helper to do most of the work.
833 */
834
835static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
836{
837 return init_setup_scc(dev, &scc_chipset);
838}
839
840/**
841 * scc_remove - pci layer remove entry
842 * @dev: PCI device
843 *
844 * Called by the PCI code when it removes an SCC PATA controller.
845 */
846
847static void scc_remove(struct pci_dev *dev)
848{
849 struct scc_ports *ports = pci_get_drvdata(dev);
850 struct ide_host *host = ports->host;
851
852 ide_host_remove(host);
853
854 iounmap((void*)ports->dma);
855 iounmap((void*)ports->ctl);
856 pci_release_selected_regions(dev, (1 << 2) - 1);
857 memset(ports, 0, sizeof(*ports));
858}
859
860static const struct pci_device_id scc_pci_tbl[] = {
861 { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
862 { 0, },
863};
864MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
865
866static struct pci_driver scc_pci_driver = {
867 .name = "SCC IDE",
868 .id_table = scc_pci_tbl,
869 .probe = scc_init_one,
870 .remove = scc_remove,
871};
872
873static int __init scc_ide_init(void)
874{
875 return ide_pci_register_driver(&scc_pci_driver);
876}
877
878static void __exit scc_ide_exit(void)
879{
880 pci_unregister_driver(&scc_pci_driver);
881}
882
883module_init(scc_ide_init);
884module_exit(scc_ide_exit);
885
886MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
887MODULE_LICENSE("GPL");
generated by cgit v1.2.2 (git 2.25.0) at 2026-04-04 16:55:49 -0400