cmd640: convert to use ide_timing_find_mode()

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

2 files changed, 7 insertions, 2 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cadce92047fb..e072bdea907a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -329,6 +329,7 @@ config BLK_DEV_PLATFORM
 config BLK_DEV_CMD640
         tristate "CMD640 chipset bugfix/support"
         depends on X86
+        select IDE_TIMINGS
         ---help---
           The CMD-Technologies CMD640 IDE chip is used on many common 486 and
           Pentium motherboards, usually in combination with a "Neptune" or
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index cd1ba14984ab..baa26a26709a 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -521,6 +521,7 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index)
 static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
                             u8 pio_mode, unsigned int cycle_time)
 {
+        struct ide_timing *t;
         int setup_time, active_time, recovery_time, clock_time;
         u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
         int bus_speed;
@@ -532,8 +533,11 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
 
         if (pio_mode > 5)
                 pio_mode = 5;
-        setup_time  = ide_pio_timings[pio_mode].setup_time;
-        active_time = ide_pio_timings[pio_mode].active_time;
+
+        t = ide_timing_find_mode(XFER_PIO_0 + pio_mode);
+        setup_time  = t->setup;
+        active_time = t->active;
+
         recovery_time = cycle_time - (setup_time + active_time);
         clock_time = 1000 / bus_speed;
         cycle_count = DIV_ROUND_UP(cycle_time, clock_time);