ide: factor out simplex handling from ide_pci_dma_base()

* Factor out simplex handling from ide_pci_dma_base() to
  ide_pci_check_simplex().

* Set hwif->dma_base early in ->init_dma method / ide_hwif_setup_dma()
  and reset it in ide_init_port() if DMA initialization fails.

* Use ->read_sff_dma_status instead of ->INB in ide_pci_dma_base().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 23 insertions, 12 deletions

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index b047013f3652..c1b609d9cb28 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -73,15 +73,12 @@ static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
  *      @d: IDE port info
  *
  *      Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
- *      Where a device has a partner that is already in DMA mode we check
- *      and enforce IDE simplex rules.
  */
 
 unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
         struct pci_dev *dev = to_pci_dev(hwif->dev);
         unsigned long dma_base = 0;
-        u8 dma_stat = 0;
 
         if (hwif->host_flags & IDE_HFLAG_MMIO)
                 return hwif->dma_base;
@@ -102,11 +99,19 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
         if (hwif->channel)
                 dma_base += 8;
 
-        if (d->host_flags & IDE_HFLAG_CS5520)
+        return dma_base;
+}
+EXPORT_SYMBOL_GPL(ide_pci_dma_base);
+
+int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+        u8 dma_stat;
+
+        if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
                 goto out;
 
         if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
-                ide_pci_clear_simplex(dma_base, d->name);
+                ide_pci_clear_simplex(hwif->dma_base, d->name);
                 goto out;
         }
 
@@ -120,15 +125,15 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
          * we tune the drive then try to grab DMA ownership if we want to be
          * the DMA end.  This has to be become dynamic to handle hot-plug.
          */
-        dma_stat = hwif->INB(dma_base + 2);
+        dma_stat = hwif->read_sff_dma_status(hwif);
         if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
                 printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
-                dma_base = 0;
+                return -1;
         }
 out:
-        return dma_base;
+        return 0;
 }
-EXPORT_SYMBOL_GPL(ide_pci_dma_base);
+EXPORT_SYMBOL_GPL(ide_pci_check_simplex);
 
 /*
  * Set up BM-DMA capability (PnP BIOS should have done this)
@@ -363,7 +368,15 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
              (dev->class & 0x80))) {
                 unsigned long base = ide_pci_dma_base(hwif, d);
 
-                if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
+                if (base == 0)
+                        return -1;
+
+                hwif->dma_base = base;
+
+                if (ide_pci_check_simplex(hwif, d) < 0)
+                        return -1;
+
+                if (ide_pci_set_master(dev, d->name) < 0)
                         return -1;
 
                 if (hwif->host_flags & IDE_HFLAG_MMIO)
@@ -377,8 +390,6 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
                 if (ide_allocate_dma_engine(hwif))
                         return -1;
 
-                hwif->dma_base = base;
-
                 hwif->dma_ops = &sff_dma_ops;
         }