Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (76 commits)
  ide: use proper printk() KERN_* levels in ide-probe.c
  ide: fix for EATA SCSI HBA in ATA emulating mode
  ide: remove stale comments from drivers/ide/Makefile
  ide: enable local IRQs in all handlers for TASKFILE_NO_DATA data phase
  ide-scsi: remove kmalloced struct request
  ht6560b: remove old history
  ht6560b: update email address
  ide-cd: fix oops when using growisofs
  gayle: release resources on ide_host_add() failure
  palm_bk3710: add UltraDMA/100 support
  ide: trivial sparse annotations
  ide: ide-tape.c sparse annotations and unaligned access removal
  ide: drop 'name' parameter from ->init_chipset method
  ide: prefix messages from IDE PCI host drivers by driver name
  it821x: remove DECLARE_ITE_DEV() macro
  it8213: remove DECLARE_ITE_DEV() macro
  ide: include PCI device name in messages from IDE PCI host drivers
  ide: remove <asm/ide.h> for some archs
  ide-generic: remove ide_default_{io_base,irq}() inlines (take 3)
  ide-generic: is no longer needed on ppc32
  ...

1 files changed, 158 insertions, 82 deletions

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index b15cad58dc81..a8e9e8a69a52 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -39,17 +39,18 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
         if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
                          (progif & 5) != 5) {
                 if ((progif & 0xa) != 0xa) {
-                        printk(KERN_INFO "%s: device not capable of full "
-                                "native PCI mode\n", name);
+                        printk(KERN_INFO "%s %s: device not capable of full "
+                                "native PCI mode\n", name, pci_name(dev));
                         return -EOPNOTSUPP;
                 }
-                printk("%s: placing both ports into native PCI mode\n", name);
+                printk(KERN_INFO "%s %s: placing both ports into native PCI "
+                        "mode\n", name, pci_name(dev));
                 (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
                 if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
                     (progif & 5) != 5) {
-                        printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted "
-                                "0x%04x, got 0x%04x\n",
-                                name, progif|5, progif);
+                        printk(KERN_ERR "%s %s: rewrite of PROGIF failed, "
+                                "wanted 0x%04x, got 0x%04x\n",
+                                name, pci_name(dev), progif | 5, progif);
                         return -EOPNOTSUPP;
                 }
         }
@@ -57,14 +58,14 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
+static int ide_pci_clear_simplex(unsigned long dma_base, const char *name)
 {
         u8 dma_stat = inb(dma_base + 2);
 
         outb(dma_stat & 0x60, dma_base + 2);
         dma_stat = inb(dma_base + 2);
-        if (dma_stat & 0x80)
-                printk(KERN_INFO "%s: simplex device: DMA forced\n", name);
+
+        return (dma_stat & 0x80) ? 1 : 0;
 }
 
 /**
@@ -91,7 +92,8 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
                 dma_base = pci_resource_start(dev, baridx);
 
                 if (dma_base == 0) {
-                        printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
+                        printk(KERN_ERR "%s %s: DMA base is invalid\n",
+                                d->name, pci_name(dev));
                         return 0;
                 }
         }
@@ -105,13 +107,16 @@ EXPORT_SYMBOL_GPL(ide_pci_dma_base);
 
 int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
+        struct pci_dev *dev = to_pci_dev(hwif->dev);
         u8 dma_stat;
 
         if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
                 goto out;
 
         if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
-                ide_pci_clear_simplex(hwif->dma_base, d->name);
+                if (ide_pci_clear_simplex(hwif->dma_base, d->name))
+                        printk(KERN_INFO "%s %s: simplex device: DMA forced\n",
+                                d->name, pci_name(dev));
                 goto out;
         }
 
@@ -127,7 +132,8 @@ int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
          */
         dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
         if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
-                printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
+                printk(KERN_INFO "%s %s: simplex device: DMA disabled\n",
+                        d->name, pci_name(dev));
                 return -1;
         }
 out:
@@ -149,8 +155,8 @@ int ide_pci_set_master(struct pci_dev *dev, const char *name)
 
                 if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) ||
                     (pcicmd & PCI_COMMAND_MASTER) == 0) {
-                        printk(KERN_ERR "%s: error updating PCICMD on %s\n",
-                                        name, pci_name(dev));
+                        printk(KERN_ERR "%s %s: error updating PCICMD\n",
+                                name, pci_name(dev));
                         return -EIO;
                 }
         }
@@ -162,9 +168,9 @@ EXPORT_SYMBOL_GPL(ide_pci_set_master);
 
 void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
 {
-        printk(KERN_INFO "%s: IDE controller (0x%04x:0x%04x rev 0x%02x) at "
-                         " PCI slot %s\n", d->name, dev->vendor, dev->device,
-                         dev->revision, pci_name(dev));
+        printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n",
+                d->name, pci_name(dev),
+                dev->vendor, dev->device, dev->revision);
 }
 EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
 
@@ -189,11 +195,12 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
         if (pci_enable_device(dev)) {
                 ret = pci_enable_device_io(dev);
                 if (ret < 0) {
-                        printk(KERN_WARNING "%s: (ide_setup_pci_device:) "
-                                "Could not enable device.\n", d->name);
+                        printk(KERN_WARNING "%s %s: couldn't enable device\n",
+                                d->name, pci_name(dev));
                         goto out;
                 }
-                printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name);
+                printk(KERN_WARNING "%s %s: BIOS configuration fixed\n",
+                        d->name, pci_name(dev));
         }
 
         /*
@@ -203,7 +210,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
          */
         ret = pci_set_dma_mask(dev, DMA_32BIT_MASK);
         if (ret < 0) {
-                printk(KERN_ERR "%s: can't set dma mask\n", d->name);
+                printk(KERN_ERR "%s %s: can't set DMA mask\n",
+                        d->name, pci_name(dev));
                 goto out;
         }
 
@@ -221,7 +229,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
 
         ret = pci_request_selected_regions(dev, bars, d->name);
         if (ret < 0)
-                printk(KERN_ERR "%s: can't reserve resources\n", d->name);
+                printk(KERN_ERR "%s %s: can't reserve resources\n",
+                        d->name, pci_name(dev));
 out:
         return ret;
 }
@@ -247,15 +256,18 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d)
          */
         if (ide_setup_pci_baseregs(dev, d->name) ||
             pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) {
-                printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name);
+                printk(KERN_INFO "%s %s: device disabled (BIOS)\n",
+                        d->name, pci_name(dev));
                 return -ENODEV;
         }
         if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
-                printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+                printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+                        d->name, pci_name(dev));
                 return -EIO;
         }
         if (!(pcicmd & PCI_COMMAND_IO)) {
-                printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name);
+                printk(KERN_ERR "%s %s: unable to enable IDE controller\n",
+                        d->name, pci_name(dev));
                 return -ENXIO;
         }
         return 0;
@@ -311,8 +323,9 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
         if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
                 if (ide_pci_check_iomem(dev, d, 2 * port) ||
                     ide_pci_check_iomem(dev, d, 2 * port + 1)) {
-                        printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported "
-                                        "as MEM for port %d!\n", d->name, port);
+                        printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are "
+                                "reported as MEM for port %d!\n",
+                                d->name, pci_name(dev), port);
                         return -EINVAL;
                 }
 
@@ -325,8 +338,8 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
         }
 
         if (!base || !ctl) {
-                printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n",
-                                d->name, port);
+                printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n",
+                        d->name, pci_name(dev), port);
                 return -EINVAL;
         }
 
@@ -393,14 +406,14 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
  *      @dev: PCI device
  *      @d: IDE port info
  *      @noisy: verbose flag
- *      @config: returned as 1 if we configured the hardware
  *
  *      Set up the PCI and controller side of the IDE interface. This brings
  *      up the PCI side of the device, checks that the device is enabled
  *      and enables it if need be
  */
 
-static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_info *d, int noisy, int *config)
+static int ide_setup_pci_controller(struct pci_dev *dev,
+                                    const struct ide_port_info *d, int noisy)
 {
         int ret;
         u16 pcicmd;
@@ -414,15 +427,16 @@ static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_i
 
         ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
         if (ret < 0) {
-                printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+                printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+                        d->name, pci_name(dev));
                 goto out;
         }
         if (!(pcicmd & PCI_COMMAND_IO)) {       /* is device disabled? */
                 ret = ide_pci_configure(dev, d);
                 if (ret < 0)
                         goto out;
-                *config = 1;
-                printk(KERN_INFO "%s: device enabled (Linux)\n", d->name);
+                printk(KERN_INFO "%s %s: device enabled (Linux)\n",
+                        d->name, pci_name(dev));
         }
 
 out:
@@ -461,7 +475,8 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
 
                 if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
                     (tmp & e->mask) != e->val)) {
-                        printk(KERN_INFO "%s: IDE port disabled\n", d->name);
+                        printk(KERN_INFO "%s %s: IDE port disabled\n",
+                                d->name, pci_name(dev));
                         continue;       /* port not enabled */
                 }
 
@@ -487,51 +502,35 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
                                    const struct ide_port_info *d,
                                    u8 noisy)
 {
-        int tried_config = 0;
         int pciirq, ret;
 
-        ret = ide_setup_pci_controller(dev, d, noisy, &tried_config);
-        if (ret < 0)
-                goto out;
-
         /*
          * Can we trust the reported IRQ?
          */
         pciirq = dev->irq;
 
+        /*
+         * This allows offboard ide-pci cards the enable a BIOS,
+         * verify interrupt settings of split-mirror pci-config
+         * space, place chipset into init-mode, and/or preserve
+         * an interrupt if the card is not native ide support.
+         */
+        ret = d->init_chipset ? d->init_chipset(dev) : 0;
+        if (ret < 0)
+                goto out;
+
         /* Is it an "IDE storage" device in non-PCI mode? */
         if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) {
                 if (noisy)
-                        printk(KERN_INFO "%s: not 100%% native mode: "
-                                "will probe irqs later\n", d->name);
-                /*
-                 * This allows offboard ide-pci cards the enable a BIOS,
-                 * verify interrupt settings of split-mirror pci-config
-                 * space, place chipset into init-mode, and/or preserve
-                 * an interrupt if the card is not native ide support.
-                 */
-                ret = d->init_chipset ? d->init_chipset(dev, d->name) : 0;
-                if (ret < 0)
-                        goto out;
+                        printk(KERN_INFO "%s %s: not 100%% native mode: will "
+                                "probe irqs later\n", d->name, pci_name(dev));
                 pciirq = ret;
-        } else if (tried_config) {
-                if (noisy)
-                        printk(KERN_INFO "%s: will probe irqs later\n", d->name);
-                pciirq = 0;
-        } else if (!pciirq) {
-                if (noisy)
-                        printk(KERN_WARNING "%s: bad irq (%d): will probe later\n",
-                                d->name, pciirq);
-                pciirq = 0;
-        } else {
-                if (d->init_chipset) {
-                        ret = d->init_chipset(dev, d->name);
-                        if (ret < 0)
-                                goto out;
-                }
-                if (noisy)
-                        printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
-                                d->name, pciirq);
+        } else if (!pciirq && noisy) {
+                printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n",
+                        d->name, pci_name(dev), pciirq);
+        } else if (noisy) {
+                printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n",
+                        d->name, pci_name(dev), pciirq);
         }
 
         ret = pciirq;
@@ -539,32 +538,77 @@ out:
         return ret;
 }
 
-int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
+int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
+                     void *priv)
 {
+        struct ide_host *host;
         hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
         int ret;
 
-        ret = do_ide_setup_pci_device(dev, d, 1);
+        ret = ide_setup_pci_controller(dev, d, 1);
+        if (ret < 0)
+                goto out;
 
-        if (ret >= 0) {
-                /* FIXME: silent failure can happen */
-                ide_pci_setup_ports(dev, d, ret, &hw[0], &hws[0]);
+        ide_pci_setup_ports(dev, d, 0, &hw[0], &hws[0]);
 
-                ret = ide_host_add(d, hws, NULL);
+        host = ide_host_alloc(d, hws);
+        if (host == NULL) {
+                ret = -ENOMEM;
+                goto out;
         }
 
+        host->dev[0] = &dev->dev;
+
+        host->host_priv = priv;
+
+        pci_set_drvdata(dev, host);
+
+        ret = do_ide_setup_pci_device(dev, d, 1);
+        if (ret < 0)
+                goto out;
+
+        /* fixup IRQ */
+        hw[1].irq = hw[0].irq = ret;
+
+        ret = ide_host_register(host, d, hws);
+        if (ret)
+                ide_host_free(host);
+out:
         return ret;
 }
-EXPORT_SYMBOL_GPL(ide_setup_pci_device);
+EXPORT_SYMBOL_GPL(ide_pci_init_one);
 
-int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
-                          const struct ide_port_info *d)
+int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
+                     const struct ide_port_info *d, void *priv)
 {
         struct pci_dev *pdev[] = { dev1, dev2 };
+        struct ide_host *host;
         int ret, i;
         hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
         for (i = 0; i < 2; i++) {
+                ret = ide_setup_pci_controller(pdev[i], d, !i);
+                if (ret < 0)
+                        goto out;
+
+                ide_pci_setup_ports(pdev[i], d, 0, &hw[i*2], &hws[i*2]);
+        }
+
+        host = ide_host_alloc(d, hws);
+        if (host == NULL) {
+                ret = -ENOMEM;
+                goto out;
+        }
+
+        host->dev[0] = &dev1->dev;
+        host->dev[1] = &dev2->dev;
+
+        host->host_priv = priv;
+
+        pci_set_drvdata(pdev[0], host);
+        pci_set_drvdata(pdev[1], host);
+
+        for (i = 0; i < 2; i++) {
                 ret = do_ide_setup_pci_device(pdev[i], d, !i);
 
                 /*
@@ -574,12 +618,44 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
                 if (ret < 0)
                         goto out;
 
-                /* FIXME: silent failure can happen */
-                ide_pci_setup_ports(pdev[i], d, ret, &hw[i*2], &hws[i*2]);
+                /* fixup IRQ */
+                hw[i*2 + 1].irq = hw[i*2].irq = ret;
         }
 
-        ret = ide_host_add(d, hws, NULL);
+        ret = ide_host_register(host, d, hws);
+        if (ret)
+                ide_host_free(host);
 out:
         return ret;
 }
-EXPORT_SYMBOL_GPL(ide_setup_pci_devices);
+EXPORT_SYMBOL_GPL(ide_pci_init_two);
+
+void ide_pci_remove(struct pci_dev *dev)
+{
+        struct ide_host *host = pci_get_drvdata(dev);
+        struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+        int bars;
+
+        if (host->host_flags & IDE_HFLAG_SINGLE)
+                bars = (1 << 2) - 1;
+        else
+                bars = (1 << 4) - 1;
+
+        if ((host->host_flags & IDE_HFLAG_NO_DMA) == 0) {
+                if (host->host_flags & IDE_HFLAG_CS5520)
+                        bars |= (1 << 2);
+                else
+                        bars |= (1 << 4);
+        }
+
+        ide_host_remove(host);
+
+        if (dev2)
+                pci_release_selected_regions(dev2, bars);
+        pci_release_selected_regions(dev, bars);
+
+        if (dev2)
+                pci_disable_device(dev2);
+        pci_disable_device(dev);
+}
+EXPORT_SYMBOL_GPL(ide_pci_remove);