ide: use I/O ops directly part #2 (take 2)

v2:
- bump host driver versions (as suggested by Sergei)
- use I/O ops directly in drivers/ide/setup-pci.c

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 3 insertions, 3 deletions

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index f187889de70f..1da9935ba948 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -185,9 +185,9 @@ static unsigned long ide_get_or_set_dma_base(ide_pci_device_t *d, ide_hwif_t *hw
                         case PCI_DEVICE_ID_CMD_643:
                         case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
                         case PCI_DEVICE_ID_REVOLUTION:
-                                simplex_stat = hwif->INB(dma_base + 2);
-                                hwif->OUTB((simplex_stat&0x60),(dma_base + 2));
-                                simplex_stat = hwif->INB(dma_base + 2);
+                                simplex_stat = inb(dma_base + 2);
+                                outb(simplex_stat & 0x60, dma_base + 2);
+                                simplex_stat = inb(dma_base + 2);
                                 if (simplex_stat & 0x80) {
                                         printk(KERN_INFO "%s: simplex device: "
                                                          "DMA forced\n",