ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 357 insertions, 0 deletions

diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
new file mode 100644
index 000000000000..f1a8758e3a99
--- /dev/null
+++ b/drivers/ide/sc1200.c
@@ -0,0 +1,357 @@
+/*
+ * Copyright (C) 2000-2002              Mark Lord <mlord@pobox.com>
+ * Copyright (C)      2007              Bartlomiej Zolnierkiewicz
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * Development of this chipset driver was funded
+ * by the nice folks at National Semiconductor.
+ *
+ * Documentation:
+ *      Available from National Semiconductor
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <linux/pm.h>
+
+#include <asm/io.h>
+
+#define DRV_NAME "sc1200"
+
+#define SC1200_REV_A    0x00
+#define SC1200_REV_B1   0x01
+#define SC1200_REV_B3   0x02
+#define SC1200_REV_C1   0x03
+#define SC1200_REV_D1   0x04
+
+#define PCI_CLK_33      0x00
+#define PCI_CLK_48      0x01
+#define PCI_CLK_66      0x02
+#define PCI_CLK_33A     0x03
+
+static unsigned short sc1200_get_pci_clock (void)
+{
+        unsigned char chip_id, silicon_revision;
+        unsigned int pci_clock;
+        /*
+         * Check the silicon revision, as not all versions of the chip
+         * have the register with the fast PCI bus timings.
+         */
+        chip_id = inb (0x903c);
+        silicon_revision = inb (0x903d);
+
+        // Read the fast pci clock frequency
+        if (chip_id == 0x04 && silicon_revision < SC1200_REV_B1) {
+                pci_clock = PCI_CLK_33;
+        } else {
+                // check clock generator configuration (cfcc)
+                // the clock is in bits 8 and 9 of this word
+
+                pci_clock = inw (0x901e);
+                pci_clock >>= 8;
+                pci_clock &= 0x03;
+                if (pci_clock == PCI_CLK_33A)
+                        pci_clock = PCI_CLK_33;
+        }
+        return pci_clock;
+}
+
+/*
+ * Here are the standard PIO mode 0-4 timings for each "format".
+ * Format-0 uses fast data reg timings, with slower command reg timings.
+ * Format-1 uses fast timings for all registers, but won't work with all drives.
+ */
+static const unsigned int sc1200_pio_timings[4][5] =
+        {{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},  // format0  33Mhz
+         {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010},  // format1, 33Mhz
+         {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021},  // format1, 48Mhz
+         {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131}}; // format1, 66Mhz
+
+/*
+ * After chip reset, the PIO timings are set to 0x00009172, which is not valid.
+ */
+//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
+
+static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
+{
+        ide_hwif_t *hwif = drive->hwif;
+        struct pci_dev *pdev = to_pci_dev(hwif->dev);
+        unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
+
+        pci_read_config_dword(pdev, basereg + 4, &format);
+        format = (format >> 31) & 1;
+        if (format)
+                format += sc1200_get_pci_clock();
+        pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3),
+                               sc1200_pio_timings[format][pio]);
+}
+
+/*
+ *      The SC1200 specifies that two drives sharing a cable cannot mix
+ *      UDMA/MDMA.  It has to be one or the other, for the pair, though
+ *      different timings can still be chosen for each drive.  We could
+ *      set the appropriate timing bits on the fly, but that might be
+ *      a bit confusing.  So, for now we statically handle this requirement
+ *      by looking at our mate drive to see what it is capable of, before
+ *      choosing a mode for our own drive.
+ */
+static u8 sc1200_udma_filter(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif = drive->hwif;
+        ide_drive_t *mate = ide_get_pair_dev(drive);
+        u16 *mateid = mate->id;
+        u8 mask = hwif->ultra_mask;
+
+        if (mate == NULL)
+                goto out;
+
+        if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
+                if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
+                    (mateid[ATA_ID_UDMA_MODES] & 7))
+                        goto out;
+                if ((mateid[ATA_ID_FIELD_VALID] & 2) &&
+                    (mateid[ATA_ID_MWDMA_MODES] & 7))
+                        mask = 0;
+        }
+out:
+        return mask;
+}
+
+static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+        ide_hwif_t              *hwif = HWIF(drive);
+        struct pci_dev          *dev = to_pci_dev(hwif->dev);
+        unsigned int            reg, timings;
+        unsigned short          pci_clock;
+        unsigned int            basereg = hwif->channel ? 0x50 : 0x40;
+
+        static const u32 udma_timing[3][3] = {
+                { 0x00921250, 0x00911140, 0x00911030 },
+                { 0x00932470, 0x00922260, 0x00922140 },
+                { 0x009436a1, 0x00933481, 0x00923261 },
+        };
+
+        static const u32 mwdma_timing[3][3] = {
+                { 0x00077771, 0x00012121, 0x00002020 },
+                { 0x000bbbb2, 0x00024241, 0x00013131 },
+                { 0x000ffff3, 0x00035352, 0x00015151 },
+        };
+
+        pci_clock = sc1200_get_pci_clock();
+
+        /*
+         * Note that each DMA mode has several timings associated with it.
+         * The correct timing depends on the fast PCI clock freq.
+         */
+
+        if (mode >= XFER_UDMA_0)
+                timings =  udma_timing[pci_clock][mode - XFER_UDMA_0];
+        else
+                timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];
+
+        if ((drive->dn & 1) == 0) {
+                pci_read_config_dword(dev, basereg + 4, &reg);
+                timings |= reg & 0x80000000;    /* preserve PIO format bit */
+                pci_write_config_dword(dev, basereg + 4, timings);
+        } else
+                pci_write_config_dword(dev, basereg + 12, timings);
+}
+
+/*  Replacement for the standard ide_dma_end action in
+ *  dma_proc.
+ *
+ *  returns 1 on error, 0 otherwise
+ */
+static int sc1200_dma_end(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+        unsigned long dma_base = hwif->dma_base;
+        byte dma_stat;
+
+        dma_stat = inb(dma_base+2);             /* get DMA status */
+
+        if (!(dma_stat & 4))
+                printk(" ide_dma_end dma_stat=%0x err=%x newerr=%x\n",
+                  dma_stat, ((dma_stat&7)!=4), ((dma_stat&2)==2));
+
+        outb(dma_stat|0x1b, dma_base+2);        /* clear the INTR & ERROR bits */
+        outb(inb(dma_base)&~1, dma_base);       /* !! DO THIS HERE !! stop DMA */
+
+        drive->waiting_for_dma = 0;
+        ide_destroy_dmatable(drive);            /* purge DMA mappings */
+
+        return (dma_stat & 7) != 4;             /* verify good DMA status */
+}
+
+/*
+ * sc1200_set_pio_mode() handles setting of PIO modes
+ * for both the chipset and drive.
+ *
+ * All existing BIOSs for this chipset guarantee that all drives
+ * will have valid default PIO timings set up before we get here.
+ */
+
+static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+        ide_hwif_t      *hwif = HWIF(drive);
+        int             mode = -1;
+
+        /*
+         * bad abuse of ->set_pio_mode interface
+         */
+        switch (pio) {
+                case 200: mode = XFER_UDMA_0;   break;
+                case 201: mode = XFER_UDMA_1;   break;
+                case 202: mode = XFER_UDMA_2;   break;
+                case 100: mode = XFER_MW_DMA_0; break;
+                case 101: mode = XFER_MW_DMA_1; break;
+                case 102: mode = XFER_MW_DMA_2; break;
+        }
+        if (mode != -1) {
+                printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
+                ide_dma_off_quietly(drive);
+                if (ide_set_dma_mode(drive, mode) == 0 &&
+                    (drive->dev_flags & IDE_DFLAG_USING_DMA))
+                        hwif->dma_ops->dma_host_set(drive, 1);
+                return;
+        }
+
+        sc1200_tunepio(drive, pio);
+}
+
+#ifdef CONFIG_PM
+struct sc1200_saved_state {
+        u32 regs[8];
+};
+
+static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
+{
+        printk("SC1200: suspend(%u)\n", state.event);
+
+        /*
+         * we only save state when going from full power to less
+         */
+        if (state.event == PM_EVENT_ON) {
+                struct ide_host *host = pci_get_drvdata(dev);
+                struct sc1200_saved_state *ss = host->host_priv;
+                unsigned int r;
+
+                /*
+                 * save timing registers
+                 * (this may be unnecessary if BIOS also does it)
+                 */
+                for (r = 0; r < 8; r++)
+                        pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
+        }
+
+        pci_disable_device(dev);
+        pci_set_power_state(dev, pci_choose_state(dev, state));
+        return 0;
+}
+
+static int sc1200_resume (struct pci_dev *dev)
+{
+        struct ide_host *host = pci_get_drvdata(dev);
+        struct sc1200_saved_state *ss = host->host_priv;
+        unsigned int r;
+        int i;
+
+        i = pci_enable_device(dev);
+        if (i)
+                return i;
+
+        /*
+         * restore timing registers
+         * (this may be unnecessary if BIOS also does it)
+         */
+        for (r = 0; r < 8; r++)
+                pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]);
+
+        return 0;
+}
+#endif
+
+static const struct ide_port_ops sc1200_port_ops = {
+        .set_pio_mode           = sc1200_set_pio_mode,
+        .set_dma_mode           = sc1200_set_dma_mode,
+        .udma_filter            = sc1200_udma_filter,
+};
+
+static const struct ide_dma_ops sc1200_dma_ops = {
+        .dma_host_set           = ide_dma_host_set,
+        .dma_setup              = ide_dma_setup,
+        .dma_exec_cmd           = ide_dma_exec_cmd,
+        .dma_start              = ide_dma_start,
+        .dma_end                = sc1200_dma_end,
+        .dma_test_irq           = ide_dma_test_irq,
+        .dma_lost_irq           = ide_dma_lost_irq,
+        .dma_timeout            = ide_dma_timeout,
+};
+
+static const struct ide_port_info sc1200_chipset __devinitdata = {
+        .name           = DRV_NAME,
+        .port_ops       = &sc1200_port_ops,
+        .dma_ops        = &sc1200_dma_ops,
+        .host_flags     = IDE_HFLAG_SERIALIZE |
+                          IDE_HFLAG_POST_SET_MODE |
+                          IDE_HFLAG_ABUSE_DMA_MODES,
+        .pio_mask       = ATA_PIO4,
+        .mwdma_mask     = ATA_MWDMA2,
+        .udma_mask      = ATA_UDMA2,
+};
+
+static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+        struct sc1200_saved_state *ss = NULL;
+        int rc;
+
+#ifdef CONFIG_PM
+        ss = kmalloc(sizeof(*ss), GFP_KERNEL);
+        if (ss == NULL)
+                return -ENOMEM;
+#endif
+        rc = ide_pci_init_one(dev, &sc1200_chipset, ss);
+        if (rc)
+                kfree(ss);
+
+        return rc;
+}
+
+static const struct pci_device_id sc1200_pci_tbl[] = {
+        { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), 0},
+        { 0, },
+};
+MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl);
+
+static struct pci_driver sc1200_pci_driver = {
+        .name           = "SC1200_IDE",
+        .id_table       = sc1200_pci_tbl,
+        .probe          = sc1200_init_one,
+        .remove         = ide_pci_remove,
+#ifdef CONFIG_PM
+        .suspend        = sc1200_suspend,
+        .resume         = sc1200_resume,
+#endif
+};
+
+static int __init sc1200_ide_init(void)
+{
+        return ide_pci_register_driver(&sc1200_pci_driver);
+}
+
+static void __exit sc1200_ide_exit(void)
+{
+        pci_unregister_driver(&sc1200_pci_driver);
+}
+
+module_init(sc1200_ide_init);
+module_exit(sc1200_ide_exit);
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("PCI driver module for NS SC1200 IDE");
+MODULE_LICENSE("GPL");