ide: add struct ide_port_info instances to legacy host drivers

* Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma().

* Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version.

* Add 'const struct ide_port_info *d' argument to ide_device_add[_all]().

* Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),
  move it to ide-probe.c and call it in in ide_device_add_all() instead of
  ide_pci_setup_ports().

* Move ->mate setup to ide_device_add_all() from ide_port_init().

* Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable
  ->autotune currently.

* Setup hwif->chipset in ide_init_port() but iff pi->chipset is set
  (to not override setup done by ide_hwif_configure()).

* Add ETRAX host handling to ide_device_add_all().

* cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n.

* pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks
  setup to pmac_ide_setup_device().

* Add 'struct ide_port_info' instances to legacy host drivers, pass them to
  ide_device_add() calls and then remove open-coded ports initialization.

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 35 insertions, 49 deletions

diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 23112ef68f67..12ac3bfb4f9a 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -412,7 +412,7 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
  */
 #define IDE_WAKEUP_DELAY        (1*HZ)
 
-static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
+static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
 static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
 static void pmac_ide_selectproc(ide_drive_t *drive);
 static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
@@ -1003,6 +1003,17 @@ pmac_ide_do_resume(ide_hwif_t *hwif)
         return 0;
 }
 
+static const struct ide_port_info pmac_port_info = {
+        .chipset                = ide_pmac,
+        .host_flags             = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
+                                  IDE_HFLAG_PIO_NO_DOWNGRADE |
+                                  IDE_HFLAG_POST_SET_MODE |
+                                  IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+                                  IDE_HFLAG_UNMASK_IRQS,
+        .pio_mask               = ATA_PIO4,
+        .mwdma_mask             = ATA_MWDMA2,
+};
+
 /*
  * Setup, register & probe an IDE channel driven by this driver, this is
  * called by one of the 2 probe functions (macio or PCI). Note that a channel
@@ -1016,23 +1027,28 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
         struct device_node *np = pmif->node;
         const int *bidp;
         u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+        struct ide_port_info d = pmac_port_info;
 
         pmif->cable_80 = 0;
         pmif->broken_dma = pmif->broken_dma_warn = 0;
-        if (of_device_is_compatible(np, "shasta-ata"))
+        if (of_device_is_compatible(np, "shasta-ata")) {
                 pmif->kind = controller_sh_ata6;
-        else if (of_device_is_compatible(np, "kauai-ata"))
+                d.udma_mask = ATA_UDMA6;
+        } else if (of_device_is_compatible(np, "kauai-ata")) {
                 pmif->kind = controller_un_ata6;
-        else if (of_device_is_compatible(np, "K2-UATA"))
+                d.udma_mask = ATA_UDMA5;
+        } else if (of_device_is_compatible(np, "K2-UATA")) {
                 pmif->kind = controller_k2_ata6;
-        else if (of_device_is_compatible(np, "keylargo-ata")) {
-                if (strcmp(np->name, "ata-4") == 0)
+                d.udma_mask = ATA_UDMA5;
+        } else if (of_device_is_compatible(np, "keylargo-ata")) {
+                if (strcmp(np->name, "ata-4") == 0) {
                         pmif->kind = controller_kl_ata4;
-                else
+                        d.udma_mask = ATA_UDMA4;
+                } else
                         pmif->kind = controller_kl_ata3;
-        } else if (of_device_is_compatible(np, "heathrow-ata"))
+        } else if (of_device_is_compatible(np, "heathrow-ata")) {
                 pmif->kind = controller_heathrow;
-        else {
+        } else {
                 pmif->kind = controller_ohare;
                 pmif->broken_dma = 1;
         }
@@ -1101,19 +1117,10 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
         /* Tell common code _not_ to mess with resources */
         hwif->mmio = 1;
         hwif->hwif_data = pmif;
-        hw->chipset = ide_pmac;
         ide_init_port_hw(hwif, hw);
         hwif->noprobe = pmif->mediabay;
         hwif->hold = pmif->mediabay;
         hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-        hwif->drives[0].unmask = 1;
-        hwif->drives[1].unmask = 1;
-        hwif->drives[0].autotune = IDE_TUNE_AUTO;
-        hwif->drives[1].autotune = IDE_TUNE_AUTO;
-        hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
-                           IDE_HFLAG_PIO_NO_DOWNGRADE |
-                           IDE_HFLAG_POST_SET_MODE;
-        hwif->pio_mask = ATA_PIO4;
         hwif->set_pio_mode = pmac_ide_set_pio_mode;
         if (pmif->kind == controller_un_ata6
             || pmif->kind == controller_k2_ata6
@@ -1133,14 +1140,16 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
 #endif /* CONFIG_PMAC_MEDIABAY */
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+        if (pmif->cable_80 == 0)
+                d.udma_mask &= ATA_UDMA2;
         /* has a DBDMA controller channel */
-        if (pmif->dma_regs)
-                pmac_ide_setup_dma(pmif, hwif);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+        if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0)
+#endif
+                d.udma_mask = d.mwdma_mask = 0;
 
         idx[0] = hwif->index;
 
-        ide_device_add(idx);
+        ide_device_add(idx, &d);
 
         return 0;
 }
@@ -1721,8 +1730,7 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive)
  * Allocate the data structures needed for using DMA with an interface
  * and fill the proper list of functions pointers
  */
-static void __devinit
-pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
+static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
 {
         struct pci_dev *dev = to_pci_dev(hwif->dev);
 
@@ -1730,7 +1738,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
          * DMA routines ...
          */
         if (dev == NULL)
-                return;
+                return -ENODEV;
         /*
          * Allocate space for the DBDMA commands.
          * The +2 is +1 for the stop command and +1 to allow for
@@ -1743,7 +1751,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
         if (pmif->dma_table_cpu == NULL) {
                 printk(KERN_ERR "%s: unable to allocate DMA command list\n",
                        hwif->name);
-                return;
+                return -ENOMEM;
         }
 
         hwif->sg_max_nents = MAX_DCMDS;
@@ -1757,29 +1765,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
         hwif->dma_timeout = &ide_dma_timeout;
         hwif->dma_lost_irq = &pmac_ide_dma_lost_irq;
 
-        switch(pmif->kind) {
-                case controller_sh_ata6:
-                        hwif->ultra_mask = pmif->cable_80 ? 0x7f : 0x07;
-                        hwif->mwdma_mask = 0x07;
-                        hwif->swdma_mask = 0x00;
-                        break;
-                case controller_un_ata6:
-                case controller_k2_ata6:
-                        hwif->ultra_mask = pmif->cable_80 ? 0x3f : 0x07;
-                        hwif->mwdma_mask = 0x07;
-                        hwif->swdma_mask = 0x00;
-                        break;
-                case controller_kl_ata4:
-                        hwif->ultra_mask = pmif->cable_80 ? 0x1f : 0x07;
-                        hwif->mwdma_mask = 0x07;
-                        hwif->swdma_mask = 0x00;
-                        break;
-                default:
-                        hwif->ultra_mask = 0x00;
-                        hwif->mwdma_mask = 0x07;
-                        hwif->swdma_mask = 0x00;
-                        break;
-        }
+        return 0;
 }
 
 #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */