aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ide/piix.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 14:57:23 -0400
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 14:57:23 -0400
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/piix.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/piix.c')
-rw-r--r--drivers/ide/piix.c480
1 files changed, 480 insertions, 0 deletions
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
new file mode 100644
index 000000000000..d63f9fdca76b
--- /dev/null
+++ b/drivers/ide/piix.c
@@ -0,0 +1,480 @@
1/*
2 * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
3 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
4 * Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
5 * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
6 *
7 * May be copied or modified under the terms of the GNU General Public License
8 *
9 * Documentation:
10 *
11 * Publically available from Intel web site. Errata documentation
12 * is also publically available. As an aide to anyone hacking on this
13 * driver the list of errata that are relevant is below.going back to
14 * PIIX4. Older device documentation is now a bit tricky to find.
15 *
16 * Errata of note:
17 *
18 * Unfixable
19 * PIIX4 errata #9 - Only on ultra obscure hw
20 * ICH3 errata #13 - Not observed to affect real hw
21 * by Intel
22 *
23 * Things we must deal with
24 * PIIX4 errata #10 - BM IDE hang with non UDMA
25 * (must stop/start dma to recover)
26 * 440MX errata #15 - As PIIX4 errata #10
27 * PIIX4 errata #15 - Must not read control registers
28 * during a PIO transfer
29 * 440MX errata #13 - As PIIX4 errata #15
30 * ICH2 errata #21 - DMA mode 0 doesn't work right
31 * ICH0/1 errata #55 - As ICH2 errata #21
32 * ICH2 spec c #9 - Extra operations needed to handle
33 * drive hotswap [NOT YET SUPPORTED]
34 * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
35 * and must be dword aligned
36 * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
37 *
38 * Should have been BIOS fixed:
39 * 450NX: errata #19 - DMA hangs on old 450NX
40 * 450NX: errata #20 - DMA hangs on old 450NX
41 * 450NX: errata #25 - Corruption with DMA on old 450NX
42 * ICH3 errata #15 - IDE deadlock under high load
43 * (BIOS must set dev 31 fn 0 bit 23)
44 * ICH3 errata #18 - Don't use native mode
45 */
46
47#include <linux/types.h>
48#include <linux/module.h>
49#include <linux/kernel.h>
50#include <linux/pci.h>
51#include <linux/ide.h>
52#include <linux/init.h>
53
54#include <asm/io.h>
55
56#define DRV_NAME "piix"
57
58static int no_piix_dma;
59
60/**
61 * piix_set_pio_mode - set host controller for PIO mode
62 * @drive: drive
63 * @pio: PIO mode number
64 *
65 * Set the interface PIO mode based upon the settings done by AMI BIOS.
66 */
67
68static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
69{
70 ide_hwif_t *hwif = HWIF(drive);
71 struct pci_dev *dev = to_pci_dev(hwif->dev);
72 int is_slave = drive->dn & 1;
73 int master_port = hwif->channel ? 0x42 : 0x40;
74 int slave_port = 0x44;
75 unsigned long flags;
76 u16 master_data;
77 u8 slave_data;
78 static DEFINE_SPINLOCK(tune_lock);
79 int control = 0;
80
81 /* ISP RTC */
82 static const u8 timings[][2]= {
83 { 0, 0 },
84 { 0, 0 },
85 { 1, 0 },
86 { 2, 1 },
87 { 2, 3 }, };
88
89 /*
90 * Master vs slave is synchronized above us but the slave register is
91 * shared by the two hwifs so the corner case of two slave timeouts in
92 * parallel must be locked.
93 */
94 spin_lock_irqsave(&tune_lock, flags);
95 pci_read_config_word(dev, master_port, &master_data);
96
97 if (pio > 1)
98 control |= 1; /* Programmable timing on */
99 if (drive->media == ide_disk)
100 control |= 4; /* Prefetch, post write */
101 if (pio > 2)
102 control |= 2; /* IORDY */
103 if (is_slave) {
104 master_data |= 0x4000;
105 master_data &= ~0x0070;
106 if (pio > 1) {
107 /* Set PPE, IE and TIME */
108 master_data |= control << 4;
109 }
110 pci_read_config_byte(dev, slave_port, &slave_data);
111 slave_data &= hwif->channel ? 0x0f : 0xf0;
112 slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
113 (hwif->channel ? 4 : 0);
114 } else {
115 master_data &= ~0x3307;
116 if (pio > 1) {
117 /* enable PPE, IE and TIME */
118 master_data |= control;
119 }
120 master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
121 }
122 pci_write_config_word(dev, master_port, master_data);
123 if (is_slave)
124 pci_write_config_byte(dev, slave_port, slave_data);
125 spin_unlock_irqrestore(&tune_lock, flags);
126}
127
128/**
129 * piix_set_dma_mode - set host controller for DMA mode
130 * @drive: drive
131 * @speed: DMA mode
132 *
133 * Set a PIIX host controller to the desired DMA mode. This involves
134 * programming the right timing data into the PCI configuration space.
135 */
136
137static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
138{
139 ide_hwif_t *hwif = HWIF(drive);
140 struct pci_dev *dev = to_pci_dev(hwif->dev);
141 u8 maslave = hwif->channel ? 0x42 : 0x40;
142 int a_speed = 3 << (drive->dn * 4);
143 int u_flag = 1 << drive->dn;
144 int v_flag = 0x01 << drive->dn;
145 int w_flag = 0x10 << drive->dn;
146 int u_speed = 0;
147 int sitre;
148 u16 reg4042, reg4a;
149 u8 reg48, reg54, reg55;
150
151 pci_read_config_word(dev, maslave, &reg4042);
152 sitre = (reg4042 & 0x4000) ? 1 : 0;
153 pci_read_config_byte(dev, 0x48, &reg48);
154 pci_read_config_word(dev, 0x4a, &reg4a);
155 pci_read_config_byte(dev, 0x54, &reg54);
156 pci_read_config_byte(dev, 0x55, &reg55);
157
158 if (speed >= XFER_UDMA_0) {
159 u8 udma = speed - XFER_UDMA_0;
160
161 u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
162
163 if (!(reg48 & u_flag))
164 pci_write_config_byte(dev, 0x48, reg48 | u_flag);
165 if (speed == XFER_UDMA_5) {
166 pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
167 } else {
168 pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
169 }
170 if ((reg4a & a_speed) != u_speed)
171 pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
172 if (speed > XFER_UDMA_2) {
173 if (!(reg54 & v_flag))
174 pci_write_config_byte(dev, 0x54, reg54 | v_flag);
175 } else
176 pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
177 } else {
178 const u8 mwdma_to_pio[] = { 0, 3, 4 };
179 u8 pio;
180
181 if (reg48 & u_flag)
182 pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
183 if (reg4a & a_speed)
184 pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
185 if (reg54 & v_flag)
186 pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
187 if (reg55 & w_flag)
188 pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
189
190 if (speed >= XFER_MW_DMA_0)
191 pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
192 else
193 pio = 2; /* only SWDMA2 is allowed */
194
195 piix_set_pio_mode(drive, pio);
196 }
197}
198
199/**
200 * init_chipset_ich - set up the ICH chipset
201 * @dev: PCI device to set up
202 *
203 * Initialize the PCI device as required. For the ICH this turns
204 * out to be nice and simple.
205 */
206
207static unsigned int init_chipset_ich(struct pci_dev *dev)
208{
209 u32 extra = 0;
210
211 pci_read_config_dword(dev, 0x54, &extra);
212 pci_write_config_dword(dev, 0x54, extra | 0x400);
213
214 return 0;
215}
216
217/**
218 * ich_clear_irq - clear BMDMA status
219 * @drive: IDE drive
220 *
221 * ICHx contollers set DMA INTR no matter DMA or PIO.
222 * BMDMA status might need to be cleared even for
223 * PIO interrupts to prevent spurious/lost IRQ.
224 */
225static void ich_clear_irq(ide_drive_t *drive)
226{
227 ide_hwif_t *hwif = HWIF(drive);
228 u8 dma_stat;
229
230 /*
231 * ide_dma_end() needs BMDMA status for error checking.
232 * So, skip clearing BMDMA status here and leave it
233 * to ide_dma_end() if this is DMA interrupt.
234 */
235 if (drive->waiting_for_dma || hwif->dma_base == 0)
236 return;
237
238 /* clear the INTR & ERROR bits */
239 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
240 /* Should we force the bit as well ? */
241 outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
242}
243
244struct ich_laptop {
245 u16 device;
246 u16 subvendor;
247 u16 subdevice;
248};
249
250/*
251 * List of laptops that use short cables rather than 80 wire
252 */
253
254static const struct ich_laptop ich_laptop[] = {
255 /* devid, subvendor, subdev */
256 { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */
257 { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
258 { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
259 { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
260 { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
261 { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
262 { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */
263 { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
264 /* end marker */
265 { 0, }
266};
267
268static u8 piix_cable_detect(ide_hwif_t *hwif)
269{
270 struct pci_dev *pdev = to_pci_dev(hwif->dev);
271 const struct ich_laptop *lap = &ich_laptop[0];
272 u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
273
274 /* check for specials */
275 while (lap->device) {
276 if (lap->device == pdev->device &&
277 lap->subvendor == pdev->subsystem_vendor &&
278 lap->subdevice == pdev->subsystem_device) {
279 return ATA_CBL_PATA40_SHORT;
280 }
281 lap++;
282 }
283
284 pci_read_config_byte(pdev, 0x54, &reg54h);
285
286 return (reg54h & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
287}
288
289/**
290 * init_hwif_piix - fill in the hwif for the PIIX
291 * @hwif: IDE interface
292 *
293 * Set up the ide_hwif_t for the PIIX interface according to the
294 * capabilities of the hardware.
295 */
296
297static void __devinit init_hwif_piix(ide_hwif_t *hwif)
298{
299 if (!hwif->dma_base)
300 return;
301
302 if (no_piix_dma)
303 hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
304}
305
306static const struct ide_port_ops piix_port_ops = {
307 .set_pio_mode = piix_set_pio_mode,
308 .set_dma_mode = piix_set_dma_mode,
309 .cable_detect = piix_cable_detect,
310};
311
312static const struct ide_port_ops ich_port_ops = {
313 .set_pio_mode = piix_set_pio_mode,
314 .set_dma_mode = piix_set_dma_mode,
315 .clear_irq = ich_clear_irq,
316 .cable_detect = piix_cable_detect,
317};
318
319#ifndef CONFIG_IA64
320 #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS
321#else
322 #define IDE_HFLAGS_PIIX 0
323#endif
324
325#define DECLARE_PIIX_DEV(udma) \
326 { \
327 .name = DRV_NAME, \
328 .init_hwif = init_hwif_piix, \
329 .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
330 .port_ops = &piix_port_ops, \
331 .host_flags = IDE_HFLAGS_PIIX, \
332 .pio_mask = ATA_PIO4, \
333 .swdma_mask = ATA_SWDMA2_ONLY, \
334 .mwdma_mask = ATA_MWDMA12_ONLY, \
335 .udma_mask = udma, \
336 }
337
338#define DECLARE_ICH_DEV(udma) \
339 { \
340 .name = DRV_NAME, \
341 .init_chipset = init_chipset_ich, \
342 .init_hwif = init_hwif_piix, \
343 .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
344 .port_ops = &ich_port_ops, \
345 .host_flags = IDE_HFLAGS_PIIX, \
346 .pio_mask = ATA_PIO4, \
347 .swdma_mask = ATA_SWDMA2_ONLY, \
348 .mwdma_mask = ATA_MWDMA12_ONLY, \
349 .udma_mask = udma, \
350 }
351
352static const struct ide_port_info piix_pci_info[] __devinitdata = {
353 /* 0: MPIIX */
354 { /*
355 * MPIIX actually has only a single IDE channel mapped to
356 * the primary or secondary ports depending on the value
357 * of the bit 14 of the IDETIM register at offset 0x6c
358 */
359 .name = DRV_NAME,
360 .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
361 .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA |
362 IDE_HFLAGS_PIIX,
363 .pio_mask = ATA_PIO4,
364 /* This is a painful system best to let it self tune for now */
365 },
366 /* 1: PIIXa/PIIXb/PIIX3 */
367 DECLARE_PIIX_DEV(0x00), /* no udma */
368 /* 2: PIIX4 */
369 DECLARE_PIIX_DEV(ATA_UDMA2),
370 /* 3: ICH0 */
371 DECLARE_ICH_DEV(ATA_UDMA2),
372 /* 4: ICH */
373 DECLARE_ICH_DEV(ATA_UDMA4),
374 /* 5: PIIX4 */
375 DECLARE_PIIX_DEV(ATA_UDMA4),
376 /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
377 DECLARE_ICH_DEV(ATA_UDMA5),
378};
379
380/**
381 * piix_init_one - called when a PIIX is found
382 * @dev: the piix device
383 * @id: the matching pci id
384 *
385 * Called when the PCI registration layer (or the IDE initialization)
386 * finds a device matching our IDE device tables.
387 */
388
389static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
390{
391 return ide_pci_init_one(dev, &piix_pci_info[id->driver_data], NULL);
392}
393
394/**
395 * piix_check_450nx - Check for problem 450NX setup
396 *
397 * Check for the present of 450NX errata #19 and errata #25. If
398 * they are found, disable use of DMA IDE
399 */
400
401static void __devinit piix_check_450nx(void)
402{
403 struct pci_dev *pdev = NULL;
404 u16 cfg;
405 while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
406 {
407 /* Look for 450NX PXB. Check for problem configurations
408 A PCI quirk checks bit 6 already */
409 pci_read_config_word(pdev, 0x41, &cfg);
410 /* Only on the original revision: IDE DMA can hang */
411 if (pdev->revision == 0x00)
412 no_piix_dma = 1;
413 /* On all revisions below 5 PXB bus lock must be disabled for IDE */
414 else if (cfg & (1<<14) && pdev->revision < 5)
415 no_piix_dma = 2;
416 }
417 if(no_piix_dma)
418 printk(KERN_WARNING DRV_NAME ": 450NX errata present, disabling IDE DMA.\n");
419 if(no_piix_dma == 2)
420 printk(KERN_WARNING DRV_NAME ": A BIOS update may resolve this.\n");
421}
422
423static const struct pci_device_id piix_pci_tbl[] = {
424 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_0), 1 },
425 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_1), 1 },
426 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), 0 },
427 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371SB_1), 1 },
428 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371AB), 2 },
429 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AB_1), 3 },
430 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82443MX_1), 2 },
431 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AA_1), 4 },
432 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82372FB_1), 5 },
433 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82451NX), 2 },
434 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_9), 6 },
435 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_8), 6 },
436 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_10), 6 },
437 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_11), 6 },
438 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_11), 6 },
439 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_11), 6 },
440 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801E_11), 6 },
441 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_10), 6 },
442#ifdef CONFIG_BLK_DEV_IDE_SATA
443 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_1), 6 },
444#endif
445 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 },
446 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 },
447 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 },
448 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 },
449 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 },
450 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 },
451 { 0, },
452};
453MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
454
455static struct pci_driver piix_pci_driver = {
456 .name = "PIIX_IDE",
457 .id_table = piix_pci_tbl,
458 .probe = piix_init_one,
459 .remove = ide_pci_remove,
460 .suspend = ide_pci_suspend,
461 .resume = ide_pci_resume,
462};
463
464static int __init piix_ide_init(void)
465{
466 piix_check_450nx();
467 return ide_pci_register_driver(&piix_pci_driver);
468}
469
470static void __exit piix_ide_exit(void)
471{
472 pci_unregister_driver(&piix_pci_driver);
473}
474
475module_init(piix_ide_init);
476module_exit(piix_ide_exit);
477
478MODULE_AUTHOR("Andre Hedrick, Andrzej Krzysztofowicz");
479MODULE_DESCRIPTION("PCI driver module for Intel PIIX IDE");
480MODULE_LICENSE("GPL");
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-02 13:53:26 -0500