ide: remove SATA_*_REG macros

* siimage.c: use hwif->sata_scr[SATA_{ERROR,STATUS}_OFFSET] instead of
  SATA_{ERROR,STATUS}_REG macros.

* Remove no longer needed SATA_*_REG macros.

While at it:

* Remove needless SATA Status register read from sil_sata_reset_poll().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 16 insertions, 9 deletions

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 5c1bd7928c27..ef5b39fa042b 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -331,15 +331,18 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
 {
         ide_hwif_t *hwif        = HWIF(drive);
         unsigned long addr      = siimage_selreg(hwif, 0x1);
+        void __iomem *sata_error_addr
+                = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
 
-        if (SATA_ERROR_REG) {
+        if (sata_error_addr) {
                 unsigned long base = (unsigned long)hwif->hwif_data;
-
                 u32 ext_stat = readl((void __iomem *)(base + 0x10));
                 u8 watchdog = 0;
+
                 if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
-                        u32 sata_error = readl((void __iomem *)SATA_ERROR_REG);
-                        writel(sata_error, (void __iomem *)SATA_ERROR_REG);
+                        u32 sata_error = readl(sata_error_addr);
+
+                        writel(sata_error, sata_error_addr);
                         watchdog = (sata_error & 0x00680000) ? 1 : 0;
                         printk(KERN_WARNING "%s: sata_error = 0x%08x, "
                                 "watchdog = %d, %s\n",
@@ -418,13 +421,17 @@ static int sil_sata_busproc(ide_drive_t * drive, int state)
 
 static int sil_sata_reset_poll(ide_drive_t *drive)
 {
-        if (SATA_STATUS_REG) {
-                ide_hwif_t *hwif        = HWIF(drive);
+        ide_hwif_t *hwif = drive->hwif;
+        void __iomem *sata_status_addr
+                = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
+
+        if (sata_status_addr) {
+                /* SATA Status is available only when in MMIO mode */
+                u32 sata_stat = readl(sata_status_addr);
 
-                /* SATA_STATUS_REG is valid only when in MMIO mode */
-                if ((readl((void __iomem *)SATA_STATUS_REG) & 0x03) != 0x03) {
+                if ((sata_stat & 0x03) != 0x03) {
                         printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
-                                hwif->name, readl((void __iomem *)SATA_STATUS_REG));
+                                            hwif->name, sata_stat);
                         HWGROUP(drive)->polling = 0;
                         return ide_started;
                 }