[PATCH] ide: fix Jmicron support

Prior to 2.6.18rc1 you could install with devices on a JMicron chipset
using the "all-generic-ide" option. As of this kernel the AHCI driver
grabs the controller and rams it into AHCI mode losing the PATA ports
and making CD drives and the like vanish. The all-generic-ide option
fails because the AHCI driver grabbed the PCI device and reconfigured
it.

To fix this three things are needed.

#1 We must put the chip into dual function mode
#2 The AHCI driver must grab only function 0 (already in your rc1 tree)
#3 Something must grab the PATA ports

The attached patch is the minimal risk edition of this. It puts the chip
into dual function mode so that AHCI will grab the SATA ports without
losing the PATA ports. To keep the risk as low as possible the third
patch adds the PCI identifiers for the PATA port and the FN check to the
ide-generic driver. There is a more featured jmicron driver on its way
but that adds risk and the ide-generic support is sufficient to install
and run a system.

The actual chip setup done by the quirk is the precise setup recommended
by the vendor.

(The JMB368 appears only in the ide-generic entry as it has no AHCI so
does not need the quirk)

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 8 insertions, 0 deletions

diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index f82e82109728..2f962cfa3f7f 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -212,6 +212,9 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi
             (!(PCI_FUNC(dev->devfn) & 1)))
                 goto out;
 
+        if (dev->vendor == PCI_VENDOR_ID_JMICRON && PCI_FUNC(dev->devfn) != 1)
+                goto out;
+
         pci_read_config_word(dev, PCI_COMMAND, &command);
         if (!(command & PCI_COMMAND_IO)) {
                 printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name);
@@ -239,6 +242,11 @@ static struct pci_device_id generic_pci_tbl[] = {
         { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
         { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
         { PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION,          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},
+        { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
         /* Must come last. If you add entries adjust this table appropriately and the init_one code */
         { PCI_ANY_ID,           PCI_ANY_ID,                        PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
         { 0, },