ide: remove ->dma_{status,command} fields from ide_hwif_t

* Use ->dma_base + offset instead of ->dma_{status,command}
  and remove no longer needed ->dma_{status,command}.

While at it:

* Use ATA_DMA_* defines.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 8 insertions, 5 deletions

diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 9b4b27a4c711..a81d47c55ce1 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -63,7 +63,7 @@ static int tc86c001_timer_expiry(ide_drive_t *drive)
         ide_hwif_t *hwif        = HWIF(drive);
         ide_expiry_t *expiry    = ide_get_hwifdata(hwif);
         ide_hwgroup_t *hwgroup  = HWGROUP(drive);
-        u8 dma_stat             = inb(hwif->dma_status);
+        u8 dma_stat             = inb(hwif->dma_base + ATA_DMA_STATUS);
 
         /* Restore a higher level driver's expiry handler first. */
         hwgroup->expiry = expiry;
@@ -71,21 +71,24 @@ static int tc86c001_timer_expiry(ide_drive_t *drive)
         if ((dma_stat & 5) == 1) {      /* DMA active and no interrupt */
                 unsigned long sc_base   = hwif->config_data;
                 unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
-                u8 dma_cmd              = inb(hwif->dma_command);
+                u8 dma_cmd              = inb(hwif->dma_base + ATA_DMA_CMD);
 
                 printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
                        "attempting recovery...\n", drive->name);
 
                 /* Stop DMA */
-                outb(dma_cmd & ~0x01, hwif->dma_command);
+                outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
 
                 /* Setup the dummy DMA transfer */
                 outw(0, sc_base + 0x0a);        /* Sector Count */
                 outw(0, twcr_port);     /* Transfer Word Count 1 or 2 */
 
                 /* Start the dummy DMA transfer */
-                outb(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
-                outb(0x01, hwif->dma_command); /* set START_STOPBM */
+
+                /* clear R_OR_WCTR for write */
+                outb(0x00, hwif->dma_base + ATA_DMA_CMD);
+                /* set START_STOPBM */
+                outb(0x01, hwif->dma_base + ATA_DMA_CMD);
 
                 /*
                  * If an interrupt was pending, it should come thru shortly.