ide: set drive->autotune in ide_pci_setup_ports()

Majority of host drivers using IDE PCI layer set drive->autotune, the only
exceptions are:

generic.c
ns87415.c
rz1000.c
trm290.c
* no ->set_pio_mode method

it821x.c:
* if memory allocation fails drive->autotune won't be set
  (but there also won't be ->set_pio_mode method in such case)

piix.c:
* MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method)

However if there is no ->set_pio_mode method there are no changes in behavior
w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 3 deletions

diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 8ae8f31c41d3..ae9b50331d2a 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -683,9 +683,6 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
         hwif->ide_dma_test_irq = scc_dma_test_irq;
         hwif->udma_filter = scc_udma_filter;
 
-        hwif->drives[0].autotune = IDE_TUNE_AUTO;
-        hwif->drives[1].autotune = IDE_TUNE_AUTO;
-
         if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
                 hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
         else