Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 315 insertions, 0 deletions

diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
new file mode 100644
index 000000000000..205a32fbc2f0
--- /dev/null
+++ b/drivers/ide/pci/ns87415.c
@@ -0,0 +1,315 @@
+/*
+ * linux/drivers/ide/pci/ns87415.c              Version 2.00  Sep. 10, 2002
+ *
+ * Copyright (C) 1997-1998      Mark Lord <mlord@pobox.com>
+ * Copyright (C) 1998           Eddie C. Dost <ecd@skynet.be>
+ * Copyright (C) 1999-2000      Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2004           Grant Grundler <grundler at parisc-linux.org>
+ *
+ * Inspired by an earlier effort from David S. Miller <davem@redhat.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#ifdef CONFIG_SUPERIO
+/* SUPERIO 87560 is a PoS chip that NatSem denies exists.
+ * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
+ * which use the integrated NS87514 cell for CD-ROM support.
+ * i.e we have to support for CD-ROM installs.
+ * See drivers/parisc/superio.c for more gory details.
+ */
+#include <asm/superio.h>
+
+static unsigned long superio_ide_status[2];
+static unsigned long superio_ide_select[2];
+static unsigned long superio_ide_dma_status[2];
+
+#define SUPERIO_IDE_MAX_RETRIES 25
+
+/* Because of a defect in Super I/O, all reads of the PCI DMA status 
+ * registers, IDE status register and the IDE select register need to be 
+ * retried
+ */
+static u8 superio_ide_inb (unsigned long port)
+{
+        if (port == superio_ide_status[0] ||
+            port == superio_ide_status[1] ||
+            port == superio_ide_select[0] ||
+            port == superio_ide_select[1] ||
+            port == superio_ide_dma_status[0] ||
+            port == superio_ide_dma_status[1]) {
+                u8 tmp;
+                int retries = SUPERIO_IDE_MAX_RETRIES;
+
+                /* printk(" [ reading port 0x%x with retry ] ", port); */
+
+                do {
+                        tmp = inb(port);
+                        if (tmp == 0)
+                                udelay(50);
+                } while (tmp == 0 && retries-- > 0);
+
+                return tmp;
+        }
+
+        return inb(port);
+}
+
+static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
+{
+        u32 base, dmabase;
+        u8 tmp;
+        struct pci_dev *pdev = hwif->pci_dev;
+        u8 port = hwif->channel;
+
+        base = pci_resource_start(pdev, port * 2) & ~3;
+        dmabase = pci_resource_start(pdev, 4) & ~3;
+
+        superio_ide_status[port] = base + IDE_STATUS_OFFSET;
+        superio_ide_select[port] = base + IDE_SELECT_OFFSET;
+        superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa);
+
+        /* Clear error/interrupt, enable dma */
+        tmp = superio_ide_inb(superio_ide_dma_status[port]);
+        outb(tmp | 0x66, superio_ide_dma_status[port]);
+
+        /* We need to override inb to workaround a SuperIO errata */
+        hwif->INB = superio_ide_inb;
+}
+
+static void __devinit init_iops_ns87415(ide_hwif_t *hwif)
+{
+        if (PCI_SLOT(hwif->pci_dev->devfn) == 0xE) {
+                /* Built-in - assume it's under superio. */
+                superio_ide_init_iops(hwif);
+        }
+}
+#endif
+
+static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
+
+/*
+ * This routine either enables/disables (according to drive->present)
+ * the IRQ associated with the port (HWIF(drive)),
+ * and selects either PIO or DMA handshaking for the next I/O operation.
+ */
+static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+        unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
+        struct pci_dev *dev = hwif->pci_dev;
+        unsigned long flags;
+
+        local_irq_save(flags);
+        new = *old;
+
+        /* Adjust IRQ enable bit */
+        bit = 1 << (8 + hwif->channel);
+        new = drive->present ? (new & ~bit) : (new | bit);
+
+        /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
+        bit   = 1 << (20 + drive->select.b.unit       + (hwif->channel << 1));
+        other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1));
+        new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
+
+        if (new != *old) {
+                unsigned char stat;
+
+                /*
+                 * Don't change DMA engine settings while Write Buffers
+                 * are busy.
+                 */
+                (void) pci_read_config_byte(dev, 0x43, &stat);
+                while (stat & 0x03) {
+                        udelay(1);
+                        (void) pci_read_config_byte(dev, 0x43, &stat);
+                }
+
+                *old = new;
+                (void) pci_write_config_dword(dev, 0x40, new);
+
+                /*
+                 * And let things settle...
+                 */
+                udelay(10);
+        }
+
+        local_irq_restore(flags);
+}
+
+static void ns87415_selectproc (ide_drive_t *drive)
+{
+        ns87415_prepare_drive (drive, drive->using_dma);
+}
+
+static int ns87415_ide_dma_end (ide_drive_t *drive)
+{
+        ide_hwif_t      *hwif = HWIF(drive);
+        u8 dma_stat = 0, dma_cmd = 0;
+
+        drive->waiting_for_dma = 0;
+        dma_stat = hwif->INB(hwif->dma_status);
+        /* get dma command mode */
+        dma_cmd = hwif->INB(hwif->dma_command);
+        /* stop DMA */
+        hwif->OUTB(dma_cmd & ~1, hwif->dma_command);
+        /* from ERRATA: clear the INTR & ERROR bits */
+        dma_cmd = hwif->INB(hwif->dma_command);
+        hwif->OUTB(dma_cmd|6, hwif->dma_command);
+        /* and free any DMA resources */
+        ide_destroy_dmatable(drive);
+        /* verify good DMA status */
+        return (dma_stat & 7) != 4;
+}
+
+static int ns87415_ide_dma_setup(ide_drive_t *drive)
+{
+        /* select DMA xfer */
+        ns87415_prepare_drive(drive, 1);
+        if (!ide_dma_setup(drive))
+                return 0;
+        /* DMA failed: select PIO xfer */
+        ns87415_prepare_drive(drive, 0);
+        return 1;
+}
+
+static int ns87415_ide_dma_check (ide_drive_t *drive)
+{
+        if (drive->media != ide_disk)
+                return HWIF(drive)->ide_dma_off_quietly(drive);
+        return __ide_dma_check(drive);
+}
+
+static void __init init_hwif_ns87415 (ide_hwif_t *hwif)
+{
+        struct pci_dev *dev = hwif->pci_dev;
+        unsigned int ctrl, using_inta;
+        u8 progif;
+#ifdef __sparc_v9__
+        int timeout;
+        u8 stat;
+#endif
+
+        hwif->autodma = 0;
+        hwif->selectproc = &ns87415_selectproc;
+
+        /*
+         * We cannot probe for IRQ: both ports share common IRQ on INTA.
+         * Also, leave IRQ masked during drive probing, to prevent infinite
+         * interrupts from a potentially floating INTA..
+         *
+         * IRQs get unmasked in selectproc when drive is first used.
+         */
+        (void) pci_read_config_dword(dev, 0x40, &ctrl);
+        (void) pci_read_config_byte(dev, 0x09, &progif);
+        /* is irq in "native" mode? */
+        using_inta = progif & (1 << (hwif->channel << 1));
+        if (!using_inta)
+                using_inta = ctrl & (1 << (4 + hwif->channel));
+        if (hwif->mate) {
+                hwif->select_data = hwif->mate->select_data;
+        } else {
+                hwif->select_data = (unsigned long)
+                                        &ns87415_control[ns87415_count++];
+                ctrl |= (1 << 8) | (1 << 9);    /* mask both IRQs */
+                if (using_inta)
+                        ctrl &= ~(1 << 6);      /* unmask INTA */
+                *((unsigned int *)hwif->select_data) = ctrl;
+                (void) pci_write_config_dword(dev, 0x40, ctrl);
+
+                /*
+                 * Set prefetch size to 512 bytes for both ports,
+                 * but don't turn on/off prefetching here.
+                 */
+                pci_write_config_byte(dev, 0x55, 0xee);
+
+#ifdef __sparc_v9__
+                /*
+                 * XXX: Reset the device, if we don't it will not respond
+                 *      to SELECT_DRIVE() properly during first probe_hwif().
+                 */
+                timeout = 10000;
+                hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
+                udelay(10);
+                hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
+                do {
+                        udelay(50);
+                        stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]);
+                        if (stat == 0xff)
+                                break;
+                } while ((stat & BUSY_STAT) && --timeout);
+#endif
+        }
+
+        if (!using_inta)
+                hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]);
+        else if (!hwif->irq && hwif->mate && hwif->mate->irq)
+                hwif->irq = hwif->mate->irq;    /* share IRQ with mate */
+
+        if (!hwif->dma_base)
+                return;
+
+        hwif->OUTB(0x60, hwif->dma_status);
+        hwif->dma_setup = &ns87415_ide_dma_setup;
+        hwif->ide_dma_check = &ns87415_ide_dma_check;
+        hwif->ide_dma_end = &ns87415_ide_dma_end;
+
+        if (!noautodma)
+                hwif->autodma = 1;
+        hwif->drives[0].autodma = hwif->autodma;
+        hwif->drives[1].autodma = hwif->autodma;
+}
+
+static ide_pci_device_t ns87415_chipset __devinitdata = {
+        .name           = "NS87415",
+#ifdef CONFIG_SUPERIO
+        .init_iops      = init_iops_ns87415,
+#endif
+        .init_hwif      = init_hwif_ns87415,
+        .channels       = 2,
+        .autodma        = AUTODMA,
+        .bootable       = ON_BOARD,
+};
+
+static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+        return ide_setup_pci_device(dev, &ns87415_chipset);
+}
+
+static struct pci_device_id ns87415_pci_tbl[] = {
+        { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+        { 0, },
+};
+MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
+
+static struct pci_driver driver = {
+        .name           = "NS87415_IDE",
+        .id_table       = ns87415_pci_tbl,
+        .probe          = ns87415_init_one,
+};
+
+static int ns87415_ide_init(void)
+{
+        return ide_pci_register_driver(&driver);
+}
+
+module_init(ns87415_ide_init);
+
+MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
+MODULE_LICENSE("GPL");