ide: include PCI device name in messages from IDE PCI host drivers

While at it:

* Apply small fixes to messages (s/dma/DMA/, remove trailing '.', etc).

* Fix printk() call in ide_setup_pci_baseregs() to use KERN_INFO.

* Move printk() call from ide_pci_clear_simplex() to the caller.

* Cleanup do_ide_setup_pci_device() a bit.

* amd74xx.c: remove superfluous PCI device revision information.

* hpt366.c: fix two printk() calls in ->init_chipset to use KERN_INFO.

* pdc202xx_new.c: fix printk() call in ->init_chipset to use KERN_INFO.

* pdc202xx_old.c: fix driver message in pdc202xx_init_one().

* via82cxxx.c: fix driver warning message in via_init_one().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 19 insertions, 12 deletions

diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 398808905f94..b8004c331edb 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1044,8 +1044,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
                 if ((temp & 0xFFFFF000) != 0xABCDE000) {
                         int i;
 
-                        printk(KERN_WARNING "%s: no clock data saved by BIOS\n",
-                               name);
+                        printk(KERN_WARNING "%s %s: no clock data saved by "
+                                "BIOS\n", name, pci_name(dev));
 
                         /* Calculate the average value of f_CNT. */
                         for (temp = i = 0; i < 128; i++) {
@@ -1070,8 +1070,9 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
                 else
                         pci_clk = 66;
 
-                printk(KERN_INFO "%s: DPLL base: %d MHz, f_CNT: %d, "
-                       "assuming %d MHz PCI\n", name, dpll_clk, f_cnt, pci_clk);
+                printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, "
+                        "assuming %d MHz PCI\n", name, pci_name(dev),
+                        dpll_clk, f_cnt, pci_clk);
         } else {
                 u32 itr1 = 0;
 
@@ -1137,7 +1138,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
                 }
 
                 if (info->timings->clock_table[clock] == NULL) {
-                        printk(KERN_ERR "%s: unknown bus timing!\n", name);
+                        printk(KERN_ERR "%s %s: unknown bus timing!\n",
+                                name, pci_name(dev));
                         return -EIO;
                 }
 
@@ -1163,16 +1165,19 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
                                 f_low += adjust >> 1;
                 }
                 if (adjust == 8) {
-                        printk(KERN_ERR "%s: DPLL did not stabilize!\n", name);
+                        printk(KERN_ERR "%s %s: DPLL did not stabilize!\n",
+                                name, pci_name(dev));
                         return -EIO;
                 }
 
-                printk("%s: using %d MHz DPLL clock\n", name, dpll_clk);
+                printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n",
+                        name, pci_name(dev), dpll_clk);
         } else {
                 /* Mark the fact that we're not using the DPLL. */
                 dpll_clk = 0;
 
-                printk("%s: using %d MHz PCI clock\n", name, pci_clk);
+                printk(KERN_INFO "%s %s: using %d MHz PCI clock\n",
+                        name, pci_name(dev), pci_clk);
         }
 
         /* Store the clock frequencies. */
@@ -1357,7 +1362,8 @@ static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
         if (dev2->irq != dev->irq) {
                 /* FIXME: we need a core pci_set_interrupt() */
                 dev2->irq = dev->irq;
-                printk(KERN_INFO "HPT374: PCI config space interrupt fixed\n");
+                printk(KERN_INFO "HPT374 %s: PCI config space interrupt "
+                        "fixed\n", pci_name(dev2));
         }
 }
 
@@ -1392,8 +1398,8 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
         pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
 
         if (pin1 != pin2 && dev->irq == dev2->irq) {
-                printk(KERN_INFO "HPT36x: onboard version of chipset, "
-                                 "pin1=%d pin2=%d\n", pin1, pin2);
+                printk(KERN_INFO "HPT36x %s: onboard version of chipset, "
+                        "pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2);
                 return 1;
         }
 
@@ -1591,7 +1597,8 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
 
         dyn_info = kzalloc(sizeof(*dyn_info) * (dev2 ? 2 : 1), GFP_KERNEL);
         if (dyn_info == NULL) {
-                printk(KERN_ERR "%s: out of memory!\n", d.name);
+                printk(KERN_ERR "%s %s: out of memory!\n",
+                        d.name, pci_name(dev));
                 pci_dev_put(dev2);
                 return -ENOMEM;
         }