ide: add ->cable_detect method to ide_hwif_t

* Add ->cable_detect method to ide_hwif_t.

* Call the new method in ide_init_port() if:
  - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78')
  - DMA initialization was successful (if hwif->dma_base is not set
    ide_init_port() sets hwif->ultra_mask to zero)
  - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT')

* Convert PCI host drivers to use ->cable_detect method.

While at it:

* Factor out cable detection to separate functions (if not already done).

* hpt366.c/it8213.c/slc90e66.c:
  - don't check cable type if "idex=ata66" is used

* pdc202xx_new.c:
  - add __devinit tag to pdcnew_cable_detect()

* pdc202xx_old.c:
  - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()
  - add __devinit tag to pdc2026x_old_cable_detect()

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 1 insertions, 5 deletions

diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 50046436a565..d7b5ea992e94 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -179,11 +179,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
         hwif->set_pio_mode = &cs5535_set_pio_mode;
         hwif->set_dma_mode = &cs5535_set_dma_mode;
 
-        if (hwif->dma_base == 0)
-                return;
-
-        if (hwif->cbl != ATA_CBL_PATA40_SHORT)
-                hwif->cbl = cs5535_cable_detect(hwif);
+        hwif->cable_detect = cs5535_cable_detect;
 }
 
 static const struct ide_port_info cs5535_chipset __devinitdata = {