ide: set drive->autotune in ide_pci_setup_ports()

Majority of host drivers using IDE PCI layer set drive->autotune, the only
exceptions are:

generic.c
ns87415.c
rz1000.c
trm290.c
* no ->set_pio_mode method

it821x.c:
* if memory allocation fails drive->autotune won't be set
  (but there also won't be ->set_pio_mode method in such case)

piix.c:
* MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method)

However if there is no ->set_pio_mode method there are no changes in behavior
w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 3 deletions

diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 0324a8a88ef4..ba0c6eba024b 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -255,9 +255,6 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
         if (CS5530_BAD_PIO(inl(basereg + 8)))
                 outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
 
-        hwif->drives[0].autotune = 1;
-        hwif->drives[1].autotune = 1;
-
         if (hwif->dma_base == 0)
                 return;