Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 274 insertions, 0 deletions

diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
new file mode 100644
index 000000000000..7dc24682d197
--- /dev/null
+++ b/drivers/ide/pci/cs5520.c
@@ -0,0 +1,274 @@
+/*
+ *      IDE tuning and bus mastering support for the CS5510/CS5520
+ *      chipsets
+ *
+ *      The CS5510/CS5520 are slightly unusual devices. Unlike the 
+ *      typical IDE controllers they do bus mastering with the drive in
+ *      PIO mode and smarter silicon.
+ *
+ *      The practical upshot of this is that we must always tune the
+ *      drive for the right PIO mode. We must also ignore all the blacklists
+ *      and the drive bus mastering DMA information.
+ *
+ *      *** This driver is strictly experimental ***
+ *
+ *      (c) Copyright Red Hat Inc 2002
+ * 
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * For the avoidance of doubt the "preferred form" of this code is one which
+ * is in an open non patent encumbered format. Where cryptographic key signing
+ * forms part of the process of creating an executable the information
+ * including keys needed to generate an equivalently functional executable
+ * are deemed to be part of the source code.
+ *
+ */
+ 
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+struct pio_clocks
+{
+        int address;
+        int assert;
+        int recovery;
+};
+
+static struct pio_clocks cs5520_pio_clocks[]={
+        {3, 6, 11},
+        {2, 5, 6},
+        {1, 4, 3},
+        {1, 3, 2},
+        {1, 2, 1}
+};
+
+static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+        struct pci_dev *pdev = hwif->pci_dev;
+        u8 speed = min((u8)XFER_PIO_4, xferspeed);
+        int pio = speed;
+        u8 reg;
+        int controller = drive->dn > 1 ? 1 : 0;
+        int error;
+        
+        switch(speed)
+        {
+                case XFER_PIO_4:
+                case XFER_PIO_3:
+                case XFER_PIO_2:
+                case XFER_PIO_1:
+                case XFER_PIO_0:
+                        pio -= XFER_PIO_0;
+                        break;
+                default:
+                        pio = 0;
+                        printk(KERN_ERR "cs55x0: bad ide timing.\n");
+        }
+        
+        printk("PIO clocking = %d\n", pio);
+        
+        /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
+
+        /* 8bit CAT/CRT - 8bit command timing for channel */
+        pci_write_config_byte(pdev, 0x62 + controller, 
+                (cs5520_pio_clocks[pio].recovery << 4) |
+                (cs5520_pio_clocks[pio].assert));
+
+        /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */
+
+        /* FIXME: should these use address ? */
+        /* Data read timing */
+        pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1),
+                (cs5520_pio_clocks[pio].recovery << 4) |
+                (cs5520_pio_clocks[pio].assert));
+        /* Write command timing */
+        pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
+                (cs5520_pio_clocks[pio].recovery << 4) |
+                (cs5520_pio_clocks[pio].assert));
+                
+        /* Set the DMA enable/disable flag */
+        reg = inb(hwif->dma_base + 0x02 + 8*controller);
+        reg |= 1<<((drive->dn&1)+5);
+        outb(reg, hwif->dma_base + 0x02 + 8*controller);
+                
+        error = ide_config_drive_speed(drive, speed);
+        /* ATAPI is harder so leave it for now */
+        if(!error && drive->media == ide_disk)
+                error = hwif->ide_dma_on(drive);
+
+        return error;
+}       
+        
+static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
+{
+        pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+        cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
+}
+
+static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+
+        /* Tune the drive for PIO modes up to PIO 4 */  
+        cs5520_tune_drive(drive, 4);
+        /* Then tell the core to use DMA operations */
+        return hwif->ide_dma_on(drive);
+}
+
+/*
+ *      We provide a callback for our nonstandard DMA location
+ */
+
+static void __devinit cs5520_init_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwif_t *hwif)
+{
+        unsigned long bmide = pci_resource_start(dev, 2);       /* Not the usual 4 */
+        if(hwif->mate && hwif->mate->dma_base)  /* Second channel at primary + 8 */
+                bmide += 8;
+        ide_setup_dma(hwif, bmide, 8);
+}
+
+/*
+ *      We wrap the DMA activate to set the vdma flag. This is needed
+ *      so that the IDE DMA layer issues PIO not DMA commands over the
+ *      DMA channel
+ */
+ 
+static int cs5520_dma_on(ide_drive_t *drive)
+{
+        drive->vdma = 1;
+        return 0;
+}
+
+static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
+{
+        hwif->tuneproc = &cs5520_tune_drive;
+        hwif->speedproc = &cs5520_tune_chipset;
+        hwif->ide_dma_check = &cs5520_config_drive_xfer_rate;
+        hwif->ide_dma_on = &cs5520_dma_on;
+
+        if(!noautodma)
+                hwif->autodma = 1;
+        
+        if(!hwif->dma_base)
+        {
+                hwif->drives[0].autotune = 1;
+                hwif->drives[1].autotune = 1;
+                return;
+        }
+        
+        hwif->atapi_dma = 0;
+        hwif->ultra_mask = 0;
+        hwif->swdma_mask = 0;
+        hwif->mwdma_mask = 0;
+        
+        hwif->drives[0].autodma = hwif->autodma;
+        hwif->drives[1].autodma = hwif->autodma;
+}
+
+#define DECLARE_CS_DEV(name_str)                                \
+        {                                                       \
+                .name           = name_str,                     \
+                .init_setup_dma = cs5520_init_setup_dma,        \
+                .init_hwif      = init_hwif_cs5520,             \
+                .channels       = 2,                            \
+                .autodma        = AUTODMA,                      \
+                .bootable       = ON_BOARD,                     \
+                .flags          = IDEPCI_FLAG_ISA_PORTS,        \
+        }
+
+static ide_pci_device_t cyrix_chipsets[] __devinitdata = {
+        /* 0 */ DECLARE_CS_DEV("Cyrix 5510"),
+        /* 1 */ DECLARE_CS_DEV("Cyrix 5520")
+};
+
+/*
+ *      The 5510/5520 are a bit weird. They don't quite set up the way
+ *      the PCI helper layer expects so we must do much of the set up 
+ *      work longhand.
+ */
+ 
+static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+        ata_index_t index;
+        ide_pci_device_t *d = &cyrix_chipsets[id->driver_data];
+
+        ide_setup_pci_noise(dev, d);
+
+        /* We must not grab the entire device, it has 'ISA' space in its
+           BARS too and we will freak out other bits of the kernel */
+        if(pci_enable_device_bars(dev, 1<<2))
+        {
+                printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
+                return 1;
+        }
+        pci_set_master(dev);
+        if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
+                printk(KERN_WARNING "cs5520: No suitable DMA available.\n");
+                return -ENODEV;
+        }
+
+        index.all = 0xf0f0;
+
+        /*
+         *      Now the chipset is configured we can let the core
+         *      do all the device setup for us
+         */
+
+        ide_pci_setup_ports(dev, d, 14, &index);
+
+        if((index.b.low & 0xf0) != 0xf0)
+                probe_hwif_init(&ide_hwifs[index.b.low]);
+        if((index.b.high & 0xf0) != 0xf0)
+                probe_hwif_init(&ide_hwifs[index.b.high]);
+        return 0;
+}
+
+static struct pci_device_id cs5520_pci_tbl[] = {
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+        { 0, },
+};
+MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);
+
+static struct pci_driver driver = {
+        .name           = "Cyrix_IDE",
+        .id_table       = cs5520_pci_tbl,
+        .probe          = cs5520_init_one,
+};
+
+static int cs5520_ide_init(void)
+{
+        return ide_pci_register_driver(&driver);
+}
+
+module_init(cs5520_ide_init);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE");
+MODULE_LICENSE("GPL");