ide: remove dead Virtual DMA support

Lets remove dead Virtual DMA support for now so it doesn't clutter
core IDE code (it can be bring back when there is a need for it):

* Remove IDE_HFLAG_VDMA host flag.

* Remove ide_drive_t.vdma flag.

* cs5520.c: remove stale FIXMEs, cs5520_dma_host_set() and cs5520_dma_ops
  (also there is no longer a need to set IDE_HFLAG_NO_ATAPI_DMA).

There should be no functional changes caused by this patch.

Cc: TAKADA Yoshihito <takada@mbf.nifty.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 30 deletions

diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index a13f2bc0665c..d30cb4d99c45 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -62,8 +62,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
         struct pci_dev *pdev = to_pci_dev(hwif->dev);
         int controller = drive->dn > 1 ? 1 : 0;
 
-        /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
-
         /* 8bit CAT/CRT - 8bit command timing for channel */
         pci_write_config_byte(pdev, 0x62 + controller, 
                 (cs5520_pio_clocks[pio].recovery << 4) |
@@ -89,45 +87,17 @@ static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
         cs5520_set_pio_mode(drive, 0);
 }
 
-/*
- *      We wrap the DMA activate to set the vdma flag. This is needed
- *      so that the IDE DMA layer issues PIO not DMA commands over the
- *      DMA channel
- *
- *      ATAPI is harder so disable it for now using IDE_HFLAG_NO_ATAPI_DMA
- */
-
-static void cs5520_dma_host_set(ide_drive_t *drive, int on)
-{
-        drive->vdma = on;
-        ide_dma_host_set(drive, on);
-}
-
 static const struct ide_port_ops cs5520_port_ops = {
         .set_pio_mode           = cs5520_set_pio_mode,
         .set_dma_mode           = cs5520_set_dma_mode,
 };
 
-static const struct ide_dma_ops cs5520_dma_ops = {
-        .dma_host_set           = cs5520_dma_host_set,
-        .dma_setup              = ide_dma_setup,
-        .dma_exec_cmd           = ide_dma_exec_cmd,
-        .dma_start              = ide_dma_start,
-        .dma_end                = __ide_dma_end,
-        .dma_test_irq           = ide_dma_test_irq,
-        .dma_lost_irq           = ide_dma_lost_irq,
-        .dma_timeout            = ide_dma_timeout,
-};
-
-/* FIXME: VDMA is disabled because it caused system hangs */
 #define DECLARE_CS_DEV(name_str)                                \
         {                                                       \
                 .name           = name_str,                     \
                 .port_ops       = &cs5520_port_ops,             \
-                .dma_ops        = &cs5520_dma_ops,              \
                 .host_flags     = IDE_HFLAG_ISA_PORTS |         \
                                   IDE_HFLAG_CS5520 |            \
-                                  IDE_HFLAG_NO_ATAPI_DMA |      \
                                   IDE_HFLAG_ABUSE_SET_DMA_MODE, \
                 .pio_mask       = ATA_PIO4,                     \
         }