ide: add ->cable_detect method to ide_hwif_t

* Add ->cable_detect method to ide_hwif_t.

* Call the new method in ide_init_port() if:
  - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78')
  - DMA initialization was successful (if hwif->dma_base is not set
    ide_init_port() sets hwif->ultra_mask to zero)
  - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT')

* Convert PCI host drivers to use ->cable_detect method.

While at it:

* Factor out cable detection to separate functions (if not already done).

* hpt366.c/it8213.c/slc90e66.c:
  - don't check cable type if "idex=ata66" is used

* pdc202xx_new.c:
  - add __devinit tag to pdcnew_cable_detect()

* pdc202xx_old.c:
  - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()
  - add __devinit tag to pdc2026x_old_cable_detect()

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 2 insertions, 3 deletions

diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 04aa9e59670e..181506340d98 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -393,6 +393,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
         hwif->set_pio_mode = &cmd64x_set_pio_mode;
         hwif->set_dma_mode = &cmd64x_set_dma_mode;
 
+        hwif->cable_detect = ata66_cmd64x;
+
         if (!hwif->dma_base)
                 return;
 
@@ -411,9 +413,6 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
         if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5)
                 hwif->ultra_mask = 0x00;
 
-        if (hwif->cbl != ATA_CBL_PATA40_SHORT)
-                hwif->cbl = ata66_cmd64x(hwif);
-
         switch (dev->device) {
         case PCI_DEVICE_ID_CMD_648:
         case PCI_DEVICE_ID_CMD_649: