ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 424 insertions, 0 deletions

diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
new file mode 100644
index 000000000000..122ed3c072fd
--- /dev/null
+++ b/drivers/ide/palm_bk3710.c
@@ -0,0 +1,424 @@
+/*
+ * Palmchip bk3710 IDE controller
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+/* Offset of the primary interface registers */
+#define IDE_PALM_ATA_PRI_REG_OFFSET 0x1F0
+
+/* Primary Control Offset */
+#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
+
+/*
+ * PalmChip 3710 IDE Controller UDMA timing structure Definition
+ */
+struct palm_bk3710_udmatiming {
+        unsigned int rptime;    /* Ready to pause time  */
+        unsigned int cycletime; /* Cycle Time           */
+};
+
+#define BK3710_BMICP            0x00
+#define BK3710_BMISP            0x02
+#define BK3710_BMIDTP           0x04
+#define BK3710_BMICS            0x08
+#define BK3710_BMISS            0x0A
+#define BK3710_BMIDTS           0x0C
+#define BK3710_IDETIMP          0x40
+#define BK3710_IDETIMS          0x42
+#define BK3710_SIDETIM          0x44
+#define BK3710_SLEWCTL          0x45
+#define BK3710_IDESTATUS        0x47
+#define BK3710_UDMACTL          0x48
+#define BK3710_UDMATIM          0x4A
+#define BK3710_MISCCTL          0x50
+#define BK3710_REGSTB           0x54
+#define BK3710_REGRCVR          0x58
+#define BK3710_DATSTB           0x5C
+#define BK3710_DATRCVR          0x60
+#define BK3710_DMASTB           0x64
+#define BK3710_DMARCVR          0x68
+#define BK3710_UDMASTB          0x6C
+#define BK3710_UDMATRP          0x70
+#define BK3710_UDMAENV          0x74
+#define BK3710_IORDYTMP         0x78
+#define BK3710_IORDYTMS         0x7C
+
+static unsigned ideclk_period; /* in nanoseconds */
+
+static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
+        {160, 240},             /* UDMA Mode 0 */
+        {125, 160},             /* UDMA Mode 1 */
+        {100, 120},             /* UDMA Mode 2 */
+        {100, 90},              /* UDMA Mode 3 */
+        {100, 60},              /* UDMA Mode 4 */
+        {85,  40},              /* UDMA Mode 5 */
+};
+
+static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
+                                    unsigned int mode)
+{
+        u8 tenv, trp, t0;
+        u32 val32;
+        u16 val16;
+
+        /* DMA Data Setup */
+        t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
+                          ideclk_period) - 1;
+        tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
+        trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
+                           ideclk_period) - 1;
+
+        /* udmatim Register */
+        val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
+        val16 |= (mode << (dev ? 4 : 0));
+        writew(val16, base + BK3710_UDMATIM);
+
+        /* udmastb Ultra DMA Access Strobe Width */
+        val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
+        val32 |= (t0 << (dev ? 8 : 0));
+        writel(val32, base + BK3710_UDMASTB);
+
+        /* udmatrp Ultra DMA Ready to Pause Time */
+        val32 = readl(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
+        val32 |= (trp << (dev ? 8 : 0));
+        writel(val32, base + BK3710_UDMATRP);
+
+        /* udmaenv Ultra DMA envelop Time */
+        val32 = readl(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
+        val32 |= (tenv << (dev ? 8 : 0));
+        writel(val32, base + BK3710_UDMAENV);
+
+        /* Enable UDMA for Device */
+        val16 = readw(base + BK3710_UDMACTL) | (1 << dev);
+        writew(val16, base + BK3710_UDMACTL);
+}
+
+static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev,
+                                   unsigned short min_cycle,
+                                   unsigned int mode)
+{
+        u8 td, tkw, t0;
+        u32 val32;
+        u16 val16;
+        struct ide_timing *t;
+        int cycletime;
+
+        t = ide_timing_find_mode(mode);
+        cycletime = max_t(int, t->cycle, min_cycle);
+
+        /* DMA Data Setup */
+        t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+        td = DIV_ROUND_UP(t->active, ideclk_period);
+        tkw = t0 - td - 1;
+        td -= 1;
+
+        val32 = readl(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
+        val32 |= (td << (dev ? 8 : 0));
+        writel(val32, base + BK3710_DMASTB);
+
+        val32 = readl(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
+        val32 |= (tkw << (dev ? 8 : 0));
+        writel(val32, base + BK3710_DMARCVR);
+
+        /* Disable UDMA for Device */
+        val16 = readw(base + BK3710_UDMACTL) & ~(1 << dev);
+        writew(val16, base + BK3710_UDMACTL);
+}
+
+static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
+                                   unsigned int dev, unsigned int cycletime,
+                                   unsigned int mode)
+{
+        u8 t2, t2i, t0;
+        u32 val32;
+        struct ide_timing *t;
+
+        /* PIO Data Setup */
+        t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+        t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
+                          ideclk_period);
+
+        t2i = t0 - t2 - 1;
+        t2 -= 1;
+
+        val32 = readl(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
+        val32 |= (t2 << (dev ? 8 : 0));
+        writel(val32, base + BK3710_DATSTB);
+
+        val32 = readl(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
+        val32 |= (t2i << (dev ? 8 : 0));
+        writel(val32, base + BK3710_DATRCVR);
+
+        if (mate) {
+                u8 mode2 = ide_get_best_pio_mode(mate, 255, 4);
+
+                if (mode2 < mode)
+                        mode = mode2;
+        }
+
+        /* TASKFILE Setup */
+        t = ide_timing_find_mode(XFER_PIO_0 + mode);
+        t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
+        t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
+
+        t2i = t0 - t2 - 1;
+        t2 -= 1;
+
+        val32 = readl(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
+        val32 |= (t2 << (dev ? 8 : 0));
+        writel(val32, base + BK3710_REGSTB);
+
+        val32 = readl(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
+        val32 |= (t2i << (dev ? 8 : 0));
+        writel(val32, base + BK3710_REGRCVR);
+}
+
+static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
+{
+        int is_slave = drive->dn & 1;
+        void __iomem *base = (void *)drive->hwif->dma_base;
+
+        if (xferspeed >= XFER_UDMA_0) {
+                palm_bk3710_setudmamode(base, is_slave,
+                                        xferspeed - XFER_UDMA_0);
+        } else {
+                palm_bk3710_setdmamode(base, is_slave,
+                                       drive->id[ATA_ID_EIDE_DMA_MIN],
+                                       xferspeed);
+        }
+}
+
+static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio)
+{
+        unsigned int cycle_time;
+        int is_slave = drive->dn & 1;
+        ide_drive_t *mate;
+        void __iomem *base = (void *)drive->hwif->dma_base;
+
+        /*
+         * Obtain the drive PIO data for tuning the Palm Chip registers
+         */
+        cycle_time = ide_pio_cycle_time(drive, pio);
+        mate = ide_get_pair_dev(drive);
+        palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio);
+}
+
+static void __devinit palm_bk3710_chipinit(void __iomem *base)
+{
+        /*
+         * enable the reset_en of ATA controller so that when ata signals
+         * are brought out, by writing into device config. at that
+         * time por_n signal should not be 'Z' and have a stable value.
+         */
+        writel(0x0300, base + BK3710_MISCCTL);
+
+        /* wait for some time and deassert the reset of ATA Device. */
+        mdelay(100);
+
+        /* Deassert the Reset */
+        writel(0x0200, base + BK3710_MISCCTL);
+
+        /*
+         * Program the IDETIMP Register Value based on the following assumptions
+         *
+         * (ATA_IDETIMP_IDEEN           , ENABLE ) |
+         * (ATA_IDETIMP_SLVTIMEN        , DISABLE) |
+         * (ATA_IDETIMP_RDYSMPL         , 70NS)    |
+         * (ATA_IDETIMP_RDYRCVRY        , 50NS)    |
+         * (ATA_IDETIMP_DMAFTIM1        , PIOCOMP) |
+         * (ATA_IDETIMP_PREPOST1        , DISABLE) |
+         * (ATA_IDETIMP_RDYSEN1         , DISABLE) |
+         * (ATA_IDETIMP_PIOFTIM1        , DISABLE) |
+         * (ATA_IDETIMP_DMAFTIM0        , PIOCOMP) |
+         * (ATA_IDETIMP_PREPOST0        , DISABLE) |
+         * (ATA_IDETIMP_RDYSEN0         , DISABLE) |
+         * (ATA_IDETIMP_PIOFTIM0        , DISABLE)
+         */
+        writew(0xB388, base + BK3710_IDETIMP);
+
+        /*
+         * Configure  SIDETIM  Register
+         * (ATA_SIDETIM_RDYSMPS1        ,120NS ) |
+         * (ATA_SIDETIM_RDYRCYS1        ,120NS )
+         */
+        writeb(0, base + BK3710_SIDETIM);
+
+        /*
+         * UDMACTL Ultra-ATA DMA Control
+         * (ATA_UDMACTL_UDMAP1  , 0 ) |
+         * (ATA_UDMACTL_UDMAP0  , 0 )
+         *
+         */
+        writew(0, base + BK3710_UDMACTL);
+
+        /*
+         * MISCCTL Miscellaneous Conrol Register
+         * (ATA_MISCCTL_RSTMODEP        , 1) |
+         * (ATA_MISCCTL_RESETP          , 0) |
+         * (ATA_MISCCTL_TIMORIDE        , 1)
+         */
+        writel(0x201, base + BK3710_MISCCTL);
+
+        /*
+         * IORDYTMP IORDY Timer for Primary Register
+         * (ATA_IORDYTMP_IORDYTMP     , 0xffff  )
+         */
+        writel(0xFFFF, base + BK3710_IORDYTMP);
+
+        /*
+         * Configure BMISP Register
+         * (ATA_BMISP_DMAEN1    , DISABLE )     |
+         * (ATA_BMISP_DMAEN0    , DISABLE )     |
+         * (ATA_BMISP_IORDYINT  , CLEAR)        |
+         * (ATA_BMISP_INTRSTAT  , CLEAR)        |
+         * (ATA_BMISP_DMAERROR  , CLEAR)
+         */
+        writew(0, base + BK3710_BMISP);
+
+        palm_bk3710_setpiomode(base, NULL, 0, 600, 0);
+        palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
+}
+
+static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif)
+{
+        return ATA_CBL_PATA80;
+}
+
+static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif,
+                                          const struct ide_port_info *d)
+{
+        printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
+
+        if (ide_allocate_dma_engine(hwif))
+                return -1;
+
+        hwif->dma_base = hwif->io_ports.data_addr - IDE_PALM_ATA_PRI_REG_OFFSET;
+
+        hwif->dma_ops = &sff_dma_ops;
+
+        return 0;
+}
+
+static const struct ide_port_ops palm_bk3710_ports_ops = {
+        .set_pio_mode           = palm_bk3710_set_pio_mode,
+        .set_dma_mode           = palm_bk3710_set_dma_mode,
+        .cable_detect           = palm_bk3710_cable_detect,
+};
+
+static struct ide_port_info __devinitdata palm_bk3710_port_info = {
+        .init_dma               = palm_bk3710_init_dma,
+        .port_ops               = &palm_bk3710_ports_ops,
+        .host_flags             = IDE_HFLAG_MMIO,
+        .pio_mask               = ATA_PIO4,
+        .mwdma_mask             = ATA_MWDMA2,
+};
+
+static int __init palm_bk3710_probe(struct platform_device *pdev)
+{
+        struct clk *clk;
+        struct resource *mem, *irq;
+        unsigned long base, rate;
+        int i, rc;
+        hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+
+        clk = clk_get(&pdev->dev, "IDECLK");
+        if (IS_ERR(clk))
+                return -ENODEV;
+
+        clk_enable(clk);
+        rate = clk_get_rate(clk);
+        ideclk_period = 1000000000UL / rate;
+
+        /* Register the IDE interface with Linux ATA Interface */
+        memset(&hw, 0, sizeof(hw));
+
+        mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (mem == NULL) {
+                printk(KERN_ERR "failed to get memory region resource\n");
+                return -ENODEV;
+        }
+
+        irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+        if (irq == NULL) {
+                printk(KERN_ERR "failed to get IRQ resource\n");
+                return -ENODEV;
+        }
+
+        if (request_mem_region(mem->start, mem->end - mem->start + 1,
+                               "palm_bk3710") == NULL) {
+                printk(KERN_ERR "failed to request memory region\n");
+                return -EBUSY;
+        }
+
+        base = IO_ADDRESS(mem->start);
+
+        /* Configure the Palm Chip controller */
+        palm_bk3710_chipinit((void __iomem *)base);
+
+        for (i = 0; i < IDE_NR_PORTS - 2; i++)
+                hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
+        hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
+        hw.irq = irq->start;
+        hw.dev = &pdev->dev;
+        hw.chipset = ide_palm3710;
+
+        palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
+                                                             ATA_UDMA5;
+
+        rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
+        if (rc)
+                goto out;
+
+        return 0;
+out:
+        printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
+        return rc;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:palm_bk3710");
+
+static struct platform_driver platform_bk_driver = {
+        .driver = {
+                .name = "palm_bk3710",
+                .owner = THIS_MODULE,
+        },
+};
+
+static int __init palm_bk3710_init(void)
+{
+        return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
+}
+
+module_init(palm_bk3710_init);
+MODULE_LICENSE("GPL");