Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 253 insertions, 0 deletions

diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
new file mode 100644
index 000000000000..fb88711812e6
--- /dev/null
+++ b/drivers/ide/legacy/ali14xx.c
@@ -0,0 +1,253 @@
+/*
+ *  linux/drivers/ide/legacy/ali14xx.c          Version 0.03    Feb 09, 1996
+ *
+ *  Copyright (C) 1996  Linus Torvalds & author (see below)
+ */
+
+/*
+ * ALI M14xx chipset EIDE controller
+ *
+ * Works for ALI M1439/1443/1445/1487/1489 chipsets.
+ *
+ * Adapted from code developed by derekn@vw.ece.cmu.edu.  -ml
+ * Derek's notes follow:
+ *
+ * I think the code should be pretty understandable,
+ * but I'll be happy to (try to) answer questions.
+ *
+ * The critical part is in the setupDrive function.  The initRegisters
+ * function doesn't seem to be necessary, but the DOS driver does it, so
+ * I threw it in.
+ *
+ * I've only tested this on my system, which only has one disk.  I posted
+ * it to comp.sys.linux.hardware, so maybe some other people will try it
+ * out.
+ *
+ * Derek Noonburg  (derekn@ece.cmu.edu)
+ * 95-sep-26
+ *
+ * Update 96-jul-13:
+ *
+ * I've since upgraded to two disks and a CD-ROM, with no trouble, and
+ * I've also heard from several others who have used it successfully.
+ * This driver appears to work with both the 1443/1445 and the 1487/1489
+ * chipsets.  I've added support for PIO mode 4 for the 1487.  This
+ * seems to work just fine on the 1443 also, although I'm not sure it's
+ * advertised as supporting mode 4.  (I've been running a WDC AC21200 in
+ * mode 4 for a while now with no trouble.)  -Derek
+ */
+
+#undef REALLY_SLOW_IO           /* most systems can safely undef this */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+/* port addresses for auto-detection */
+#define ALI_NUM_PORTS 4
+static int ports[ALI_NUM_PORTS] __initdata = {0x074, 0x0f4, 0x034, 0x0e4};
+
+/* register initialization data */
+typedef struct { u8 reg, data; } RegInitializer;
+
+static RegInitializer initData[] __initdata = {
+        {0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
+        {0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
+        {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
+        {0x29, 0x00}, {0x2a, 0x00}, {0x2f, 0x00}, {0x2b, 0x00},
+        {0x2c, 0x00}, {0x2d, 0x00}, {0x2e, 0x00}, {0x30, 0x00},
+        {0x31, 0x00}, {0x32, 0x00}, {0x33, 0x00}, {0x34, 0xff},
+        {0x35, 0x03}, {0x00, 0x00}
+};
+
+#define ALI_MAX_PIO 4
+
+/* timing parameter registers for each drive */
+static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
+        {0x03, 0x26, 0x04, 0x27},     /* drive 0 */
+        {0x05, 0x28, 0x06, 0x29},     /* drive 1 */
+        {0x2b, 0x30, 0x2c, 0x31},     /* drive 2 */
+        {0x2d, 0x32, 0x2e, 0x33},     /* drive 3 */
+};
+
+static int basePort;    /* base port address */
+static int regPort;     /* port for register number */
+static int dataPort;    /* port for register data */
+static u8 regOn;        /* output to base port to access registers */
+static u8 regOff;       /* output to base port to close registers */
+
+/*------------------------------------------------------------------------*/
+
+/*
+ * Read a controller register.
+ */
+static inline u8 inReg (u8 reg)
+{
+        outb_p(reg, regPort);
+        return inb(dataPort);
+}
+
+/*
+ * Write a controller register.
+ */
+static void outReg (u8 data, u8 reg)
+{
+        outb_p(reg, regPort);
+        outb_p(data, dataPort);
+}
+
+/*
+ * Set PIO mode for the specified drive.
+ * This function computes timing parameters
+ * and sets controller registers accordingly.
+ */
+static void ali14xx_tune_drive (ide_drive_t *drive, u8 pio)
+{
+        int driveNum;
+        int time1, time2;
+        u8 param1, param2, param3, param4;
+        unsigned long flags;
+        ide_pio_data_t d;
+        int bus_speed = system_bus_clock();
+
+        pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, &d);
+
+        /* calculate timing, according to PIO mode */
+        time1 = d.cycle_time;
+        time2 = ide_pio_timings[pio].active_time;
+        param3 = param1 = (time2 * bus_speed + 999) / 1000;
+        param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
+        if (pio < 3) {
+                param3 += 8;
+                param4 += 8;
+        }
+        printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n",
+                drive->name, pio, time1, time2, param1, param2, param3, param4);
+
+        /* stuff timing parameters into controller registers */
+        driveNum = (HWIF(drive)->index << 1) + drive->select.b.unit;
+        spin_lock_irqsave(&ide_lock, flags);
+        outb_p(regOn, basePort);
+        outReg(param1, regTab[driveNum].reg1);
+        outReg(param2, regTab[driveNum].reg2);
+        outReg(param3, regTab[driveNum].reg3);
+        outReg(param4, regTab[driveNum].reg4);
+        outb_p(regOff, basePort);
+        spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+/*
+ * Auto-detect the IDE controller port.
+ */
+static int __init findPort (void)
+{
+        int i;
+        u8 t;
+        unsigned long flags;
+
+        local_irq_save(flags);
+        for (i = 0; i < ALI_NUM_PORTS; ++i) {
+                basePort = ports[i];
+                regOff = inb(basePort);
+                for (regOn = 0x30; regOn <= 0x33; ++regOn) {
+                        outb_p(regOn, basePort);
+                        if (inb(basePort) == regOn) {
+                                regPort = basePort + 4;
+                                dataPort = basePort + 8;
+                                t = inReg(0) & 0xf0;
+                                outb_p(regOff, basePort);
+                                local_irq_restore(flags);
+                                if (t != 0x50)
+                                        return 0;
+                                return 1;  /* success */
+                        }
+                }
+                outb_p(regOff, basePort);
+        }
+        local_irq_restore(flags);
+        return 0;
+}
+
+/*
+ * Initialize controller registers with default values.
+ */
+static int __init initRegisters (void) {
+        RegInitializer *p;
+        u8 t;
+        unsigned long flags;
+
+        local_irq_save(flags);
+        outb_p(regOn, basePort);
+        for (p = initData; p->reg != 0; ++p)
+                outReg(p->data, p->reg);
+        outb_p(0x01, regPort);
+        t = inb(regPort) & 0x01;
+        outb_p(regOff, basePort);
+        local_irq_restore(flags);
+        return t;
+}
+
+static int __init ali14xx_probe(void)
+{
+        ide_hwif_t *hwif, *mate;
+
+        printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
+                          basePort, regOn);
+
+        /* initialize controller registers */
+        if (!initRegisters()) {
+                printk(KERN_ERR "ali14xx: Chip initialization failed.\n");
+                return 1;
+        }
+
+        hwif = &ide_hwifs[0];
+        mate = &ide_hwifs[1];
+
+        hwif->chipset = ide_ali14xx;
+        hwif->tuneproc = &ali14xx_tune_drive;
+        hwif->mate = mate;
+
+        mate->chipset = ide_ali14xx;
+        mate->tuneproc = &ali14xx_tune_drive;
+        mate->mate = hwif;
+        mate->channel = 1;
+
+        probe_hwif_init(hwif);
+        probe_hwif_init(mate);
+
+        create_proc_ide_interfaces();
+
+        return 0;
+}
+
+/* Can be called directly from ide.c. */
+int __init ali14xx_init(void)
+{
+        /* auto-detect IDE controller port */
+        if (findPort()) {
+                if (ali14xx_probe())
+                        return -ENODEV;
+                return 0;
+        }
+        printk(KERN_ERR "ali14xx: not found.\n");
+        return -ENODEV;
+}
+
+#ifdef MODULE
+module_init(ali14xx_init);
+#endif
+
+MODULE_AUTHOR("see local file");
+MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets");
+MODULE_LICENSE("GPL");