ide: increase timeout in wait_drive_not_busy()

Some ATAPI devices take longer than the current max timeout value to
become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout
value to 10 ms.

This fixes kernel.org bugzilla bug #10887:
http://bugzilla.kernel.org/show_bug.cgi?id=10887

Reported-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 3 insertions, 3 deletions

diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 0c908ca3ff79..ab545ffa1549 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -225,10 +225,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
         u8 stat;
 
         /*
-         * Last sector was transfered, wait until drive is ready.
-         * This can take up to 10 usec, but we will wait max 1 ms.
+         * Last sector was transfered, wait until device is ready.  This can
+         * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
          */
-        for (retries = 0; retries < 100; retries++) {
+        for (retries = 0; retries < 1000; retries++) {
                 stat = ide_read_status(drive);
 
                 if (stat & BUSY_STAT)