ide: add ->set_irq method

Add ->set_irq method for setting nIEN bit of ATA Device Control
register and use it instead of ide_set_irq().

While at it:

* Use ->set_irq in init_irq() and do_reset1().

* Don't use HWIF() macro in ide_check_pm_state().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 27 insertions, 10 deletions

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index e106954e13f9..41ec53f329fa 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -135,6 +135,23 @@ static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
                 return inb(hwif->dma_base + ATA_DMA_STATUS);
 }
 
+static void ide_set_irq(ide_hwif_t *hwif, int on)
+{
+        u8 ctl = ATA_DEVCTL_OBS;
+
+        if (on == 4) { /* hack for SRST */
+                ctl |= 4;
+                on &= ~4;
+        }
+
+        ctl |= on ? 0 : 2;
+
+        if (hwif->host_flags & IDE_HFLAG_MMIO)
+                writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
+        else
+                outb(ctl, hwif->io_ports.ctl_addr);
+}
+
 static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
 {
         ide_hwif_t *hwif = drive->hwif;
@@ -360,6 +377,8 @@ void default_hwif_transport(ide_hwif_t *hwif)
         hwif->read_altstatus      = ide_read_altstatus;
         hwif->read_sff_dma_status = ide_read_sff_dma_status;
 
+        hwif->set_irq     = ide_set_irq;
+
         hwif->tf_load     = ide_tf_load;
         hwif->tf_read     = ide_tf_read;
 
@@ -722,7 +741,7 @@ int ide_driveid_update(ide_drive_t *drive)
          */
 
         SELECT_MASK(drive, 1);
-        ide_set_irq(drive, 0);
+        hwif->set_irq(hwif, 0);
         msleep(50);
         hwif->exec_command(hwif, WIN_IDENTIFY);
         timeout = jiffies + WAIT_WORSTCASE;
@@ -808,12 +827,12 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
         SELECT_DRIVE(drive);
         SELECT_MASK(drive, 0);
         udelay(1);
-        ide_set_irq(drive, 0);
+        hwif->set_irq(hwif, 0);
         hwif->OUTB(speed, io_ports->nsect_addr);
         hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
         hwif->exec_command(hwif, WIN_SETFEATURES);
         if (drive->quirk_list == 2)
-                ide_set_irq(drive, 1);
+                hwif->set_irq(hwif, 1);
 
         error = __ide_wait_stat(drive, drive->ready_stat,
                                 BUSY_STAT|DRQ_STAT|ERR_STAT,
@@ -1129,7 +1148,6 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
         ide_hwgroup_t *hwgroup;
         struct ide_io_ports *io_ports;
         const struct ide_port_ops *port_ops;
-        u8 ctl;
 
         spin_lock_irqsave(&ide_lock, flags);
         hwif = HWIF(drive);
@@ -1174,16 +1192,15 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
          * immediate interrupt due to the edge transition it produces.
          * This single interrupt gives us a "fast poll" for drives that
          * recover from reset very quickly, saving us the first 50ms wait time.
+         *
+         * TODO: add ->softreset method and stop abusing ->set_irq
          */
         /* set SRST and nIEN */
-        hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | 6, io_ports->ctl_addr);
+        hwif->set_irq(hwif, 4);
         /* more than enough time */
         udelay(10);
-        if (drive->quirk_list == 2)
-                ctl = ATA_DEVCTL_OBS;           /* clear SRST and nIEN */
-        else
-                ctl = ATA_DEVCTL_OBS | 2;       /* clear SRST, leave nIEN */
-        hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr);
+        /* clear SRST, leave nIEN (unless device is on the quirk list) */
+        hwif->set_irq(hwif, drive->quirk_list == 2);
         /* more than enough time */
         udelay(10);
         hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;