ide: add cable detection for early UDMA66 devices (take 3)

* Move ide_in_drive_list() from ide-dma.c to ide-iops.c.

* Add ivb_list[] table for listening early UDMA66 devices which don't conform
  to ATA4 standard wrt cable detection (bit14 is zero, only bit13 is valid)
  and use only device side cable detection for them since host side cable
  detection may be unreliable.

* Add model "QUANTUM FIREBALLlct10 05" with firwmare "A03.0900" to the list
  (from Craig's bugreport).

v2:
* Improve kernel message basing on suggestion from Sergei.

v3:
* Don't print kernel message when no device side cable detection is done,
  plus some minor fixes.  (Noticed by Sergei)

Thanks to Craig for testing this patch.

Cc: Craig Block <chblock3@yahoo.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 19 deletions

diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 865a2740a6e3..ff644a5e12cd 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -135,25 +135,6 @@ static const struct drive_list_entry drive_blacklist [] = {
 };
 
 /**
- *      ide_in_drive_list       -       look for drive in black/white list
- *      @id: drive identifier
- *      @drive_table: list to inspect
- *
- *      Look for a drive in the blacklist and the whitelist tables
- *      Returns 1 if the drive is found in the table.
- */
-
-int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table)
-{
-        for ( ; drive_table->id_model ; drive_table++)
-                if ((!strcmp(drive_table->id_model, id->model)) &&
-                    (!drive_table->id_firmware ||
-                     strstr(id->fw_rev, drive_table->id_firmware)))
-                        return 1;
-        return 0;
-}
-
-/**
  *      ide_dma_intr    -       IDE DMA interrupt handler
  *      @drive: the drive the interrupt is for
  *