ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 358 insertions, 0 deletions

diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
new file mode 100644
index 000000000000..5297f07d2933
--- /dev/null
+++ b/drivers/ide/cy82c693.c
@@ -0,0 +1,358 @@
+/*
+ *  Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
+ *  Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
+ *
+ * CYPRESS CY82C693 chipset IDE controller
+ *
+ * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
+ * Writing the driver was quite simple, since most of the job is
+ * done by the generic pci-ide support.
+ * The hard part was finding the CY82C693's datasheet on Cypress's
+ * web page :-(. But Altavista solved this problem :-).
+ *
+ *
+ * Notes:
+ * - I recently got a 16.8G IBM DTTA, so I was able to test it with
+ *   a large and fast disk - the results look great, so I'd say the
+ *   driver is working fine :-)
+ *   hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA
+ * - this is my first linux driver, so there's probably a lot  of room
+ *   for optimizations and bug fixing, so feel free to do it.
+ * - if using PIO mode it's a good idea to set the PIO mode and
+ *   32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda
+ * - I had some problems with my IBM DHEA with PIO modes < 2
+ *   (lost interrupts) ?????
+ * - first tests with DMA look okay, they seem to work, but there is a
+ *   problem with sound - the BusMaster IDE TimeOut should fixed this
+ *
+ * Ancient History:
+ * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693
+ * ASK@1999-01-23: v0.33 made a few minor code clean ups
+ *                       removed DMA clock speed setting by default
+ *                       added boot message
+ * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut
+ *                       added support to set DMA Controller Clock Speed
+ * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes
+ *                       on some drives.
+ * ASK@1998-10-29: v0.3 added support to set DMA modes
+ * ASK@1998-10-28: v0.2 added support to set PIO modes
+ * ASK@1998-10-27: v0.1 first version - chipset detection
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define DRV_NAME "cy82c693"
+
+/*
+ *      The following are used to debug the driver.
+ */
+#define CY82C693_DEBUG_INFO     0
+
+/*
+ *      NOTE: the value for busmaster timeout is tricky and I got it by
+ *      trial and error!  By using a to low value will cause DMA timeouts
+ *      and drop IDE performance, and by using a to high value will cause
+ *      audio playback to scatter.
+ *      If you know a better value or how to calc it, please let me know.
+ */
+
+/* twice the value written in cy82c693ub datasheet */
+#define BUSMASTER_TIMEOUT       0x50
+/*
+ * the value above was tested on my machine and it seems to work okay
+ */
+
+/* here are the offset definitions for the registers */
+#define CY82_IDE_CMDREG         0x04
+#define CY82_IDE_ADDRSETUP      0x48
+#define CY82_IDE_MASTER_IOR     0x4C
+#define CY82_IDE_MASTER_IOW     0x4D
+#define CY82_IDE_SLAVE_IOR      0x4E
+#define CY82_IDE_SLAVE_IOW      0x4F
+#define CY82_IDE_MASTER_8BIT    0x50
+#define CY82_IDE_SLAVE_8BIT     0x51
+
+#define CY82_INDEX_PORT         0x22
+#define CY82_DATA_PORT          0x23
+
+#define CY82_INDEX_CHANNEL0     0x30
+#define CY82_INDEX_CHANNEL1     0x31
+#define CY82_INDEX_TIMEOUT      0x32
+
+/* the min and max PCI bus speed in MHz - from datasheet */
+#define CY82C963_MIN_BUS_SPEED  25
+#define CY82C963_MAX_BUS_SPEED  33
+
+/* the struct for the PIO mode timings */
+typedef struct pio_clocks_s {
+        u8      address_time;   /* Address setup (clocks) */
+        u8      time_16r;       /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
+        u8      time_16w;       /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
+        u8      time_8;         /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
+} pio_clocks_t;
+
+/*
+ * calc clocks using bus_speed
+ * returns (rounded up) time in bus clocks for time in ns
+ */
+static int calc_clk(int time, int bus_speed)
+{
+        int clocks;
+
+        clocks = (time*bus_speed+999)/1000 - 1;
+
+        if (clocks < 0)
+                clocks = 0;
+
+        if (clocks > 0x0F)
+                clocks = 0x0F;
+
+        return clocks;
+}
+
+/*
+ * compute the values for the clock registers for PIO
+ * mode and pci_clk [MHz] speed
+ *
+ * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used
+ *       for mode 3 and 4 drives 8 and 16-bit timings are the same
+ *
+ */
+static void compute_clocks(u8 pio, pio_clocks_t *p_pclk)
+{
+        struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
+        int clk1, clk2;
+        int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
+
+        /* we don't check against CY82C693's min and max speed,
+         * so you can play with the idebus=xx parameter
+         */
+
+        /* let's calc the address setup time clocks */
+        p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed);
+
+        /* let's calc the active and recovery time clocks */
+        clk1 = calc_clk(t->active, bus_speed);
+
+        /* calc recovery timing */
+        clk2 = t->cycle - t->active - t->setup;
+
+        clk2 = calc_clk(clk2, bus_speed);
+
+        clk1 = (clk1<<4)|clk2;  /* combine active and recovery clocks */
+
+        /* note: we use the same values for 16bit IOR and IOW
+         *      those are all the same, since I don't have other
+         *      timings than those from ide-lib.c
+         */
+
+        p_pclk->time_16r = (u8)clk1;
+        p_pclk->time_16w = (u8)clk1;
+
+        /* what are good values for 8bit ?? */
+        p_pclk->time_8 = (u8)clk1;
+}
+
+/*
+ * set DMA mode a specific channel for CY82C693
+ */
+
+static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+        ide_hwif_t *hwif = drive->hwif;
+        u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
+
+        index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
+
+        data = (mode & 3) | (single << 2);
+
+        outb(index, CY82_INDEX_PORT);
+        outb(data, CY82_DATA_PORT);
+
+#if CY82C693_DEBUG_INFO
+        printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
+                drive->name, hwif->channel, drive->dn & 1, mode & 3, single);
+#endif /* CY82C693_DEBUG_INFO */
+
+        /*
+         * note: below we set the value for Bus Master IDE TimeOut Register
+         * I'm not absolutly sure what this does, but it solved my problem
+         * with IDE DMA and sound, so I now can play sound and work with
+         * my IDE driver at the same time :-)
+         *
+         * If you know the correct (best) value for this register please
+         * let me know - ASK
+         */
+
+        data = BUSMASTER_TIMEOUT;
+        outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
+        outb(data, CY82_DATA_PORT);
+
+#if CY82C693_DEBUG_INFO
+        printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
+                drive->name, data);
+#endif /* CY82C693_DEBUG_INFO */
+}
+
+static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+        struct pci_dev *dev = to_pci_dev(hwif->dev);
+        pio_clocks_t pclk;
+        unsigned int addrCtrl;
+
+        /* select primary or secondary channel */
+        if (hwif->index > 0) {  /* drive is on the secondary channel */
+                dev = pci_get_slot(dev->bus, dev->devfn+1);
+                if (!dev) {
+                        printk(KERN_ERR "%s: tune_drive: "
+                                "Cannot find secondary interface!\n",
+                                drive->name);
+                        return;
+                }
+        }
+
+        /* let's calc the values for this PIO mode */
+        compute_clocks(pio, &pclk);
+
+        /* now let's write  the clocks registers */
+        if ((drive->dn & 1) == 0) {
+                /*
+                 * set master drive
+                 * address setup control register
+                 * is 32 bit !!!
+                 */
+                pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
+
+                addrCtrl &= (~0xF);
+                addrCtrl |= (unsigned int)pclk.address_time;
+                pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
+
+                /* now let's set the remaining registers */
+                pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r);
+                pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w);
+                pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8);
+
+                addrCtrl &= 0xF;
+        } else {
+                /*
+                 * set slave drive
+                 * address setup control register
+                 * is 32 bit !!!
+                 */
+                pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
+
+                addrCtrl &= (~0xF0);
+                addrCtrl |= ((unsigned int)pclk.address_time<<4);
+                pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
+
+                /* now let's set the remaining registers */
+                pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r);
+                pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w);
+                pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8);
+
+                addrCtrl >>= 4;
+                addrCtrl &= 0xF;
+        }
+
+#if CY82C693_DEBUG_INFO
+        printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to "
+                "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
+                drive->name, hwif->channel, drive->dn & 1,
+                addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
+#endif /* CY82C693_DEBUG_INFO */
+}
+
+static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
+{
+        static ide_hwif_t *primary;
+        struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+        if (PCI_FUNC(dev->devfn) == 1)
+                primary = hwif;
+        else {
+                hwif->mate = primary;
+                hwif->channel = 1;
+        }
+}
+
+static const struct ide_port_ops cy82c693_port_ops = {
+        .set_pio_mode           = cy82c693_set_pio_mode,
+        .set_dma_mode           = cy82c693_set_dma_mode,
+};
+
+static const struct ide_port_info cy82c693_chipset __devinitdata = {
+        .name           = DRV_NAME,
+        .init_iops      = init_iops_cy82c693,
+        .port_ops       = &cy82c693_port_ops,
+        .chipset        = ide_cy82c693,
+        .host_flags     = IDE_HFLAG_SINGLE,
+        .pio_mask       = ATA_PIO4,
+        .swdma_mask     = ATA_SWDMA2,
+        .mwdma_mask     = ATA_MWDMA2,
+};
+
+static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+        struct pci_dev *dev2;
+        int ret = -ENODEV;
+
+        /* CY82C693 is more than only a IDE controller.
+           Function 1 is primary IDE channel, function 2 - secondary. */
+        if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
+            PCI_FUNC(dev->devfn) == 1) {
+                dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
+                ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
+                if (ret)
+                        pci_dev_put(dev2);
+        }
+        return ret;
+}
+
+static void __devexit cy82c693_remove(struct pci_dev *dev)
+{
+        struct ide_host *host = pci_get_drvdata(dev);
+        struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+
+        ide_pci_remove(dev);
+        pci_dev_put(dev2);
+}
+
+static const struct pci_device_id cy82c693_pci_tbl[] = {
+        { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
+        { 0, },
+};
+MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
+
+static struct pci_driver cy82c693_pci_driver = {
+        .name           = "Cypress_IDE",
+        .id_table       = cy82c693_pci_tbl,
+        .probe          = cy82c693_init_one,
+        .remove         = __devexit_p(cy82c693_remove),
+        .suspend        = ide_pci_suspend,
+        .resume         = ide_pci_resume,
+};
+
+static int __init cy82c693_ide_init(void)
+{
+        return ide_pci_register_driver(&cy82c693_pci_driver);
+}
+
+static void __exit cy82c693_ide_exit(void)
+{
+        pci_unregister_driver(&cy82c693_pci_driver);
+}
+
+module_init(cy82c693_ide_init);
+module_exit(cy82c693_ide_exit);
+
+MODULE_AUTHOR("Andreas Krebs, Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
+MODULE_LICENSE("GPL");