ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 294 insertions, 0 deletions

diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
new file mode 100644
index 000000000000..53f079cc00af
--- /dev/null
+++ b/drivers/ide/cs5530.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2000                   Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2000                   Mark Lord <mlord@pobox.com>
+ * Copyright (C) 2007                   Bartlomiej Zolnierkiewicz
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * Development of this chipset driver was funded
+ * by the nice folks at National Semiconductor.
+ *
+ * Documentation:
+ *      CS5530 documentation available from National Semiconductor.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/io.h>
+
+#define DRV_NAME "cs5530"
+
+/*
+ * Here are the standard PIO mode 0-4 timings for each "format".
+ * Format-0 uses fast data reg timings, with slower command reg timings.
+ * Format-1 uses fast timings for all registers, but won't work with all drives.
+ */
+static unsigned int cs5530_pio_timings[2][5] = {
+        {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
+        {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
+};
+
+/*
+ * After chip reset, the PIO timings are set to 0x0000e132, which is not valid.
+ */
+#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
+#define CS5530_BASEREG(hwif)    (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
+
+/**
+ *      cs5530_set_pio_mode     -       set host controller for PIO mode
+ *      @drive: drive
+ *      @pio: PIO mode number
+ *
+ *      Handles setting of PIO mode for the chipset.
+ *
+ *      The init_hwif_cs5530() routine guarantees that all drives
+ *      will have valid default PIO timings set up before we get here.
+ */
+
+static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+        unsigned long basereg = CS5530_BASEREG(drive->hwif);
+        unsigned int format = (inl(basereg + 4) >> 31) & 1;
+
+        outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
+}
+
+/**
+ *      cs5530_udma_filter      -       UDMA filter
+ *      @drive: drive
+ *
+ *      cs5530_udma_filter() does UDMA mask filtering for the given drive
+ *      taking into the consideration capabilities of the mate device.
+ *
+ *      The CS5530 specifies that two drives sharing a cable cannot mix
+ *      UDMA/MDMA.  It has to be one or the other, for the pair, though
+ *      different timings can still be chosen for each drive.  We could
+ *      set the appropriate timing bits on the fly, but that might be
+ *      a bit confusing.  So, for now we statically handle this requirement
+ *      by looking at our mate drive to see what it is capable of, before
+ *      choosing a mode for our own drive.
+ *
+ *      Note: This relies on the fact we never fail from UDMA to MWDMA2
+ *      but instead drop to PIO.
+ */
+
+static u8 cs5530_udma_filter(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif = drive->hwif;
+        ide_drive_t *mate = ide_get_pair_dev(drive);
+        u16 *mateid = mate->id;
+        u8 mask = hwif->ultra_mask;
+
+        if (mate == NULL)
+                goto out;
+
+        if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
+                if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
+                    (mateid[ATA_ID_UDMA_MODES] & 7))
+                        goto out;
+                if ((mateid[ATA_ID_FIELD_VALID] & 2) &&
+                    (mateid[ATA_ID_MWDMA_MODES] & 7))
+                        mask = 0;
+        }
+out:
+        return mask;
+}
+
+static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+        unsigned long basereg;
+        unsigned int reg, timings = 0;
+
+        switch (mode) {
+                case XFER_UDMA_0:       timings = 0x00921250; break;
+                case XFER_UDMA_1:       timings = 0x00911140; break;
+                case XFER_UDMA_2:       timings = 0x00911030; break;
+                case XFER_MW_DMA_0:     timings = 0x00077771; break;
+                case XFER_MW_DMA_1:     timings = 0x00012121; break;
+                case XFER_MW_DMA_2:     timings = 0x00002020; break;
+        }
+        basereg = CS5530_BASEREG(drive->hwif);
+        reg = inl(basereg + 4);                 /* get drive0 config register */
+        timings |= reg & 0x80000000;            /* preserve PIO format bit */
+        if ((drive-> dn & 1) == 0) {            /* are we configuring drive0? */
+                outl(timings, basereg + 4);     /* write drive0 config register */
+        } else {
+                if (timings & 0x00100000)
+                        reg |=  0x00100000;     /* enable UDMA timings for both drives */
+                else
+                        reg &= ~0x00100000;     /* disable UDMA timings for both drives */
+                outl(reg, basereg + 4);         /* write drive0 config register */
+                outl(timings, basereg + 12);    /* write drive1 config register */
+        }
+}
+
+/**
+ *      init_chipset_5530       -       set up 5530 bridge
+ *      @dev: PCI device
+ *
+ *      Initialize the cs5530 bridge for reliable IDE DMA operation.
+ */
+
+static unsigned int init_chipset_cs5530(struct pci_dev *dev)
+{
+        struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
+
+        if (pci_resource_start(dev, 4) == 0)
+                return -EFAULT;
+
+        dev = NULL;
+        while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
+                switch (dev->device) {
+                        case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
+                                master_0 = pci_dev_get(dev);
+                                break;
+                        case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
+                                cs5530_0 = pci_dev_get(dev);
+                                break;
+                }
+        }
+        if (!master_0) {
+                printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
+                goto out;
+        }
+        if (!cs5530_0) {
+                printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
+                goto out;
+        }
+
+        /*
+         * Enable BusMaster and MemoryWriteAndInvalidate for the cs5530:
+         * -->  OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530
+         */
+
+        pci_set_master(cs5530_0);
+        pci_try_set_mwi(cs5530_0);
+
+        /*
+         * Set PCI CacheLineSize to 16-bytes:
+         * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
+         */
+
+        pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
+
+        /*
+         * Disable trapping of UDMA register accesses (Win98 hack):
+         * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
+         */
+
+        pci_write_config_word(cs5530_0, 0xd0, 0x5006);
+
+        /*
+         * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
+         * The other settings are what is necessary to get the register
+         * into a sane state for IDE DMA operation.
+         */
+
+        pci_write_config_byte(master_0, 0x40, 0x1e);
+
+        /* 
+         * Set max PCI burst size (16-bytes seems to work best):
+         *         16bytes: set bit-1 at 0x41 (reg value of 0x16)
+         *      all others: clear bit-1 at 0x41, and do:
+         *        128bytes: OR 0x00 at 0x41
+         *        256bytes: OR 0x04 at 0x41
+         *        512bytes: OR 0x08 at 0x41
+         *       1024bytes: OR 0x0c at 0x41
+         */
+
+        pci_write_config_byte(master_0, 0x41, 0x14);
+
+        /*
+         * These settings are necessary to get the chip
+         * into a sane state for IDE DMA operation.
+         */
+
+        pci_write_config_byte(master_0, 0x42, 0x00);
+        pci_write_config_byte(master_0, 0x43, 0xc1);
+
+out:
+        pci_dev_put(master_0);
+        pci_dev_put(cs5530_0);
+        return 0;
+}
+
+/**
+ *      init_hwif_cs5530        -       initialise an IDE channel
+ *      @hwif: IDE to initialize
+ *
+ *      This gets invoked by the IDE driver once for each channel. It
+ *      performs channel-specific pre-initialization before drive probing.
+ */
+
+static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
+{
+        unsigned long basereg;
+        u32 d0_timings;
+
+        basereg = CS5530_BASEREG(hwif);
+        d0_timings = inl(basereg + 0);
+        if (CS5530_BAD_PIO(d0_timings))
+                outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
+        if (CS5530_BAD_PIO(inl(basereg + 8)))
+                outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
+}
+
+static const struct ide_port_ops cs5530_port_ops = {
+        .set_pio_mode           = cs5530_set_pio_mode,
+        .set_dma_mode           = cs5530_set_dma_mode,
+        .udma_filter            = cs5530_udma_filter,
+};
+
+static const struct ide_port_info cs5530_chipset __devinitdata = {
+        .name           = DRV_NAME,
+        .init_chipset   = init_chipset_cs5530,
+        .init_hwif      = init_hwif_cs5530,
+        .port_ops       = &cs5530_port_ops,
+        .host_flags     = IDE_HFLAG_SERIALIZE |
+                          IDE_HFLAG_POST_SET_MODE,
+        .pio_mask       = ATA_PIO4,
+        .mwdma_mask     = ATA_MWDMA2,
+        .udma_mask      = ATA_UDMA2,
+};
+
+static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+        return ide_pci_init_one(dev, &cs5530_chipset, NULL);
+}
+
+static const struct pci_device_id cs5530_pci_tbl[] = {
+        { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), 0 },
+        { 0, },
+};
+MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl);
+
+static struct pci_driver cs5530_pci_driver = {
+        .name           = "CS5530 IDE",
+        .id_table       = cs5530_pci_tbl,
+        .probe          = cs5530_init_one,
+        .remove         = ide_pci_remove,
+        .suspend        = ide_pci_suspend,
+        .resume         = ide_pci_resume,
+};
+
+static int __init cs5530_ide_init(void)
+{
+        return ide_pci_register_driver(&cs5530_pci_driver);
+}
+
+static void __exit cs5530_ide_exit(void)
+{
+        pci_unregister_driver(&cs5530_pci_driver);
+}
+
+module_init(cs5530_ide_init);
+module_exit(cs5530_ide_exit);
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE");
+MODULE_LICENSE("GPL");