ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 642 insertions, 0 deletions

diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
new file mode 100644
index 000000000000..0ec8fd1e4dcb
--- /dev/null
+++ b/drivers/ide/au1xxx-ide.c
@@ -0,0 +1,642 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ *       Interface and Linux Device Driver" Application Note.
+ */
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <linux/scatterlist.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1xxx_ide.h>
+
+#define DRV_NAME        "au1200-ide"
+#define DRV_AUTHOR      "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
+
+/* enable the burstmode in the dbdma */
+#define IDE_AU1XXX_BURSTMODE    1
+
+static _auide_hwif auide_hwif;
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+
+void auide_insw(unsigned long port, void *addr, u32 count)
+{
+        _auide_hwif *ahwif = &auide_hwif;
+        chan_tab_t *ctp;
+        au1x_ddma_desc_t *dp;
+
+        if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, 
+                           DDMA_FLAGS_NOIE)) {
+                printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
+                return;
+        }
+        ctp = *((chan_tab_t **)ahwif->rx_chan);
+        dp = ctp->cur_ptr;
+        while (dp->dscr_cmd0 & DSCR_CMD0_V)
+                ;
+        ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
+}
+
+void auide_outsw(unsigned long port, void *addr, u32 count)
+{
+        _auide_hwif *ahwif = &auide_hwif;
+        chan_tab_t *ctp;
+        au1x_ddma_desc_t *dp;
+
+        if(!put_source_flags(ahwif->tx_chan, (void*)addr,
+                             count << 1, DDMA_FLAGS_NOIE)) {
+                printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
+                return;
+        }
+        ctp = *((chan_tab_t **)ahwif->tx_chan);
+        dp = ctp->cur_ptr;
+        while (dp->dscr_cmd0 & DSCR_CMD0_V)
+                ;
+        ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
+}
+
+static void au1xxx_input_data(ide_drive_t *drive, struct request *rq,
+                              void *buf, unsigned int len)
+{
+        auide_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
+}
+
+static void au1xxx_output_data(ide_drive_t *drive, struct request *rq,
+                               void *buf, unsigned int len)
+{
+        auide_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
+}
+#endif
+
+static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+        int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
+
+        /* set pio mode! */
+        switch(pio) {
+        case 0:
+                mem_sttime = SBC_IDE_TIMING(PIO0);
+
+                /* set configuration for RCS2# */
+                mem_stcfg |= TS_MASK;
+                mem_stcfg &= ~TCSOE_MASK;
+                mem_stcfg &= ~TOECS_MASK;
+                mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
+                break;
+
+        case 1:
+                mem_sttime = SBC_IDE_TIMING(PIO1);
+
+                /* set configuration for RCS2# */
+                mem_stcfg |= TS_MASK;
+                mem_stcfg &= ~TCSOE_MASK;
+                mem_stcfg &= ~TOECS_MASK;
+                mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
+                break;
+
+        case 2:
+                mem_sttime = SBC_IDE_TIMING(PIO2);
+
+                /* set configuration for RCS2# */
+                mem_stcfg &= ~TS_MASK;
+                mem_stcfg &= ~TCSOE_MASK;
+                mem_stcfg &= ~TOECS_MASK;
+                mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
+                break;
+
+        case 3:
+                mem_sttime = SBC_IDE_TIMING(PIO3);
+
+                /* set configuration for RCS2# */
+                mem_stcfg &= ~TS_MASK;
+                mem_stcfg &= ~TCSOE_MASK;
+                mem_stcfg &= ~TOECS_MASK;
+                mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;
+
+                break;
+
+        case 4:
+                mem_sttime = SBC_IDE_TIMING(PIO4);
+
+                /* set configuration for RCS2# */
+                mem_stcfg &= ~TS_MASK;
+                mem_stcfg &= ~TCSOE_MASK;
+                mem_stcfg &= ~TOECS_MASK;
+                mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
+                break;
+        }
+
+        au_writel(mem_sttime,MEM_STTIME2);
+        au_writel(mem_stcfg,MEM_STCFG2);
+}
+
+static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+        int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
+
+        switch(speed) {
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+        case XFER_MW_DMA_2:
+                mem_sttime = SBC_IDE_TIMING(MDMA2);
+
+                /* set configuration for RCS2# */
+                mem_stcfg &= ~TS_MASK;
+                mem_stcfg &= ~TCSOE_MASK;
+                mem_stcfg &= ~TOECS_MASK;
+                mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;
+
+                break;
+        case XFER_MW_DMA_1:
+                mem_sttime = SBC_IDE_TIMING(MDMA1);
+
+                /* set configuration for RCS2# */
+                mem_stcfg &= ~TS_MASK;
+                mem_stcfg &= ~TCSOE_MASK;
+                mem_stcfg &= ~TOECS_MASK;
+                mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;
+
+                break;
+        case XFER_MW_DMA_0:
+                mem_sttime = SBC_IDE_TIMING(MDMA0);
+
+                /* set configuration for RCS2# */
+                mem_stcfg |= TS_MASK;
+                mem_stcfg &= ~TCSOE_MASK;
+                mem_stcfg &= ~TOECS_MASK;
+                mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;
+
+                break;
+#endif
+        }
+
+        au_writel(mem_sttime,MEM_STTIME2);
+        au_writel(mem_stcfg,MEM_STCFG2);
+}
+
+/*
+ * Multi-Word DMA + DbDMA functions
+ */
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+static int auide_build_dmatable(ide_drive_t *drive)
+{
+        int i, iswrite, count = 0;
+        ide_hwif_t *hwif = HWIF(drive);
+        struct request *rq = HWGROUP(drive)->rq;
+        _auide_hwif *ahwif = &auide_hwif;
+        struct scatterlist *sg;
+
+        iswrite = (rq_data_dir(rq) == WRITE);
+        /* Save for interrupt context */
+        ahwif->drive = drive;
+
+        hwif->sg_nents = i = ide_build_sglist(drive, rq);
+
+        if (!i)
+                return 0;
+
+        /* fill the descriptors */
+        sg = hwif->sg_table;
+        while (i && sg_dma_len(sg)) {
+                u32 cur_addr;
+                u32 cur_len;
+
+                cur_addr = sg_dma_address(sg);
+                cur_len = sg_dma_len(sg);
+
+                while (cur_len) {
+                        u32 flags = DDMA_FLAGS_NOIE;
+                        unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
+
+                        if (++count >= PRD_ENTRIES) {
+                                printk(KERN_WARNING "%s: DMA table too small\n",
+                                       drive->name);
+                                goto use_pio_instead;
+                        }
+
+                        /* Lets enable intr for the last descriptor only */
+                        if (1==i)
+                                flags = DDMA_FLAGS_IE;
+                        else
+                                flags = DDMA_FLAGS_NOIE;
+
+                        if (iswrite) {
+                                if(!put_source_flags(ahwif->tx_chan, 
+                                                     (void*) sg_virt(sg),
+                                                     tc, flags)) { 
+                                        printk(KERN_ERR "%s failed %d\n", 
+                                               __func__, __LINE__);
+                                }
+                        } else 
+                        {
+                                if(!put_dest_flags(ahwif->rx_chan, 
+                                                   (void*) sg_virt(sg),
+                                                   tc, flags)) { 
+                                        printk(KERN_ERR "%s failed %d\n", 
+                                               __func__, __LINE__);
+                                }
+                        }
+
+                        cur_addr += tc;
+                        cur_len -= tc;
+                }
+                sg = sg_next(sg);
+                i--;
+        }
+
+        if (count)
+                return 1;
+
+ use_pio_instead:
+        ide_destroy_dmatable(drive);
+
+        return 0; /* revert to PIO for this request */
+}
+
+static int auide_dma_end(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+
+        if (hwif->sg_nents) {
+                ide_destroy_dmatable(drive);
+                hwif->sg_nents = 0;
+        }
+
+        return 0;
+}
+
+static void auide_dma_start(ide_drive_t *drive )
+{
+}
+
+
+static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+{
+        /* issue cmd to drive */
+        ide_execute_command(drive, command, &ide_dma_intr,
+                            (2*WAIT_CMD), NULL);
+}
+
+static int auide_dma_setup(ide_drive_t *drive)
+{               
+        struct request *rq = HWGROUP(drive)->rq;
+
+        if (!auide_build_dmatable(drive)) {
+                ide_map_sg(drive, rq);
+                return 1;
+        }
+
+        drive->waiting_for_dma = 1;
+        return 0;
+}
+
+static int auide_dma_test_irq(ide_drive_t *drive)
+{
+        /* If dbdma didn't execute the STOP command yet, the
+         * active bit is still set
+         */
+        drive->waiting_for_dma++;
+        if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
+                printk(KERN_WARNING "%s: timeout waiting for ddma to \
+                                     complete\n", drive->name);
+                return 1;
+        }
+        udelay(10);
+        return 0;
+}
+
+static void auide_dma_host_set(ide_drive_t *drive, int on)
+{
+}
+
+static void auide_ddma_tx_callback(int irq, void *param)
+{
+        _auide_hwif *ahwif = (_auide_hwif*)param;
+        ahwif->drive->waiting_for_dma = 0;
+}
+
+static void auide_ddma_rx_callback(int irq, void *param)
+{
+        _auide_hwif *ahwif = (_auide_hwif*)param;
+        ahwif->drive->waiting_for_dma = 0;
+}
+
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
+
+static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
+{
+        dev->dev_id          = dev_id;
+        dev->dev_physaddr    = (u32)IDE_PHYS_ADDR;
+        dev->dev_intlevel    = 0;
+        dev->dev_intpolarity = 0;
+        dev->dev_tsize       = tsize;
+        dev->dev_devwidth    = devwidth;
+        dev->dev_flags       = flags;
+}
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+static const struct ide_dma_ops au1xxx_dma_ops = {
+        .dma_host_set           = auide_dma_host_set,
+        .dma_setup              = auide_dma_setup,
+        .dma_exec_cmd           = auide_dma_exec_cmd,
+        .dma_start              = auide_dma_start,
+        .dma_end                = auide_dma_end,
+        .dma_test_irq           = auide_dma_test_irq,
+        .dma_lost_irq           = ide_dma_lost_irq,
+        .dma_timeout            = ide_dma_timeout,
+};
+
+static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+        _auide_hwif *auide = &auide_hwif;
+        dbdev_tab_t source_dev_tab, target_dev_tab;
+        u32 dev_id, tsize, devwidth, flags;
+
+        dev_id   = IDE_DDMA_REQ;
+
+        tsize    =  8; /*  1 */
+        devwidth = 32; /* 16 */
+
+#ifdef IDE_AU1XXX_BURSTMODE 
+        flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
+#else
+        flags = DEV_FLAGS_SYNC;
+#endif
+
+        /* setup dev_tab for tx channel */
+        auide_init_dbdma_dev( &source_dev_tab,
+                              dev_id,
+                              tsize, devwidth, DEV_FLAGS_OUT | flags);
+        auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+
+        auide_init_dbdma_dev( &source_dev_tab,
+                              dev_id,
+                              tsize, devwidth, DEV_FLAGS_IN | flags);
+        auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+        
+        /* We also need to add a target device for the DMA */
+        auide_init_dbdma_dev( &target_dev_tab,
+                              (u32)DSCR_CMD0_ALWAYS,
+                              tsize, devwidth, DEV_FLAGS_ANYUSE);
+        auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); 
+ 
+        /* Get a channel for TX */
+        auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
+                                                 auide->tx_dev_id,
+                                                 auide_ddma_tx_callback,
+                                                 (void*)auide);
+ 
+        /* Get a channel for RX */
+        auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
+                                                 auide->target_dev_id,
+                                                 auide_ddma_rx_callback,
+                                                 (void*)auide);
+
+        auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
+                                                             NUM_DESCRIPTORS);
+        auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
+                                                             NUM_DESCRIPTORS);
+
+        /* FIXME: check return value */
+        (void)ide_allocate_dma_engine(hwif);
+        
+        au1xxx_dbdma_start( auide->tx_chan );
+        au1xxx_dbdma_start( auide->rx_chan );
+ 
+        return 0;
+} 
+#else
+static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+        _auide_hwif *auide = &auide_hwif;
+        dbdev_tab_t source_dev_tab;
+        int flags;
+
+#ifdef IDE_AU1XXX_BURSTMODE 
+        flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
+#else
+        flags = DEV_FLAGS_SYNC;
+#endif
+
+        /* setup dev_tab for tx channel */
+        auide_init_dbdma_dev( &source_dev_tab,
+                              (u32)DSCR_CMD0_ALWAYS,
+                              8, 32, DEV_FLAGS_OUT | flags);
+        auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+
+        auide_init_dbdma_dev( &source_dev_tab,
+                              (u32)DSCR_CMD0_ALWAYS,
+                              8, 32, DEV_FLAGS_IN | flags);
+        auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
+        
+        /* Get a channel for TX */
+        auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
+                                                 auide->tx_dev_id,
+                                                 NULL,
+                                                 (void*)auide);
+ 
+        /* Get a channel for RX */
+        auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
+                                                 DSCR_CMD0_ALWAYS,
+                                                 NULL,
+                                                 (void*)auide);
+ 
+        auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
+                                                             NUM_DESCRIPTORS);
+        auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
+                                                             NUM_DESCRIPTORS);
+ 
+        au1xxx_dbdma_start( auide->tx_chan );
+        au1xxx_dbdma_start( auide->rx_chan );
+        
+        return 0;
+}
+#endif
+
+static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
+{
+        int i;
+        unsigned long *ata_regs = hw->io_ports_array;
+
+        /* FIXME? */
+        for (i = 0; i < 8; i++)
+                *ata_regs++ = ahwif->regbase + (i << IDE_REG_SHIFT);
+
+        /* set the Alternative Status register */
+        *ata_regs = ahwif->regbase + (14 << IDE_REG_SHIFT);
+}
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+static const struct ide_tp_ops au1xxx_tp_ops = {
+        .exec_command           = ide_exec_command,
+        .read_status            = ide_read_status,
+        .read_altstatus         = ide_read_altstatus,
+        .read_sff_dma_status    = ide_read_sff_dma_status,
+
+        .set_irq                = ide_set_irq,
+
+        .tf_load                = ide_tf_load,
+        .tf_read                = ide_tf_read,
+
+        .input_data             = au1xxx_input_data,
+        .output_data            = au1xxx_output_data,
+};
+#endif
+
+static const struct ide_port_ops au1xxx_port_ops = {
+        .set_pio_mode           = au1xxx_set_pio_mode,
+        .set_dma_mode           = auide_set_dma_mode,
+};
+
+static const struct ide_port_info au1xxx_port_info = {
+        .init_dma               = auide_ddma_init,
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+        .tp_ops                 = &au1xxx_tp_ops,
+#endif
+        .port_ops               = &au1xxx_port_ops,
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+        .dma_ops                = &au1xxx_dma_ops,
+#endif
+        .host_flags             = IDE_HFLAG_POST_SET_MODE |
+                                  IDE_HFLAG_NO_IO_32BIT |
+                                  IDE_HFLAG_UNMASK_IRQS,
+        .pio_mask               = ATA_PIO4,
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+        .mwdma_mask             = ATA_MWDMA2,
+#endif
+};
+
+static int au_ide_probe(struct device *dev)
+{
+        struct platform_device *pdev = to_platform_device(dev);
+        _auide_hwif *ahwif = &auide_hwif;
+        struct resource *res;
+        struct ide_host *host;
+        int ret = 0;
+        hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
+        char *mode = "MWDMA2";
+#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
+        char *mode = "PIO+DDMA(offload)";
+#endif
+
+        memset(&auide_hwif, 0, sizeof(_auide_hwif));
+        ahwif->irq = platform_get_irq(pdev, 0);
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+        if (res == NULL) {
+                pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id);
+                ret = -ENODEV;
+                goto out;
+        }
+        if (ahwif->irq < 0) {
+                pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id);
+                ret = -ENODEV;
+                goto out;
+        }
+
+        if (!request_mem_region(res->start, res->end - res->start + 1,
+                                pdev->name)) {
+                pr_debug("%s: request_mem_region failed\n", DRV_NAME);
+                ret =  -EBUSY;
+                goto out;
+        }
+
+        ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1);
+        if (ahwif->regbase == 0) {
+                ret = -ENOMEM;
+                goto out;
+        }
+
+        memset(&hw, 0, sizeof(hw));
+        auide_setup_ports(&hw, ahwif);
+        hw.irq = ahwif->irq;
+        hw.dev = dev;
+        hw.chipset = ide_au1xxx;
+
+        ret = ide_host_add(&au1xxx_port_info, hws, &host);
+        if (ret)
+                goto out;
+
+        auide_hwif.hwif = host->ports[0];
+
+        dev_set_drvdata(dev, host);
+
+        printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
+
+ out:
+        return ret;
+}
+
+static int au_ide_remove(struct device *dev)
+{
+        struct platform_device *pdev = to_platform_device(dev);
+        struct resource *res;
+        struct ide_host *host = dev_get_drvdata(dev);
+        _auide_hwif *ahwif = &auide_hwif;
+
+        ide_host_remove(host);
+
+        iounmap((void *)ahwif->regbase);
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        release_mem_region(res->start, res->end - res->start + 1);
+
+        return 0;
+}
+
+static struct device_driver au1200_ide_driver = {
+        .name           = "au1200-ide",
+        .bus            = &platform_bus_type,
+        .probe          = au_ide_probe,
+        .remove         = au_ide_remove,
+};
+
+static int __init au_ide_init(void)
+{
+        return driver_register(&au1200_ide_driver);
+}
+
+static void __exit au_ide_exit(void)
+{
+        driver_unregister(&au1200_ide_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AU1200 IDE driver");
+
+module_init(au_ide_init);
+module_exit(au_ide_exit);