Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

5 files changed, 1115 insertions, 0 deletions

diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile
new file mode 100644
index 000000000000..6a78f0755f26
--- /dev/null
+++ b/drivers/ide/arm/Makefile
@@ -0,0 +1,6 @@
+
+obj-$(CONFIG_BLK_DEV_IDE_ICSIDE)        += icside.o
+obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)        += rapide.o
+obj-$(CONFIG_BLK_DEV_IDE_BAST)          += bast-ide.o
+
+EXTRA_CFLAGS    := -Idrivers/ide
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c
new file mode 100644
index 000000000000..9d474e5fd8dc
--- /dev/null
+++ b/drivers/ide/arm/bast-ide.c
@@ -0,0 +1,71 @@
+/* linux/drivers/ide/arm/bast-ide.c
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *  Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/arch/map.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-irq.h>
+
+/* list of registered interfaces */
+static ide_hwif_t *ifs[2];
+
+static int __init
+bastide_register(unsigned int base, unsigned int aux, int irq,
+                 ide_hwif_t **hwif)
+{
+        hw_regs_t hw;
+        int i;
+
+        memset(&hw, 0, sizeof(hw));
+
+        base += BAST_IDE_CS;
+        aux  += BAST_IDE_CS;
+
+        for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+                hw.io_ports[i] = (unsigned long)base;
+                base += 0x20;
+        }
+
+        hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20);
+        hw.irq = irq;
+
+        ide_register_hw(&hw, hwif);
+
+        return 0;
+}
+
+static int __init bastide_init(void)
+{
+        /* we can treat the VR1000 and the BAST the same */
+
+        if (!(machine_is_bast() || machine_is_vr1000()))
+                return 0;
+
+        printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n");
+
+        bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0, &ifs[0]);
+        bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1, &ifs[1]);
+        return 0;
+}
+
+module_init(bastide_init);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver");
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
new file mode 100644
index 000000000000..308897e57e4d
--- /dev/null
+++ b/drivers/ide/arm/icside.c
@@ -0,0 +1,870 @@
+/*
+ * linux/drivers/ide/arm/icside.c
+ *
+ * Copyright (c) 1996-2004 Russell King.
+ *
+ * Please note that this platform does not support 32-bit IDE IO.
+ */
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/errno.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/scatterlist.h>
+
+#include <asm/dma.h>
+#include <asm/ecard.h>
+#include <asm/io.h>
+
+#define ICS_IDENT_OFFSET                0x2280
+
+#define ICS_ARCIN_V5_INTRSTAT           0x0000
+#define ICS_ARCIN_V5_INTROFFSET         0x0004
+#define ICS_ARCIN_V5_IDEOFFSET          0x2800
+#define ICS_ARCIN_V5_IDEALTOFFSET       0x2b80
+#define ICS_ARCIN_V5_IDESTEPPING        6
+
+#define ICS_ARCIN_V6_IDEOFFSET_1        0x2000
+#define ICS_ARCIN_V6_INTROFFSET_1       0x2200
+#define ICS_ARCIN_V6_INTRSTAT_1         0x2290
+#define ICS_ARCIN_V6_IDEALTOFFSET_1     0x2380
+#define ICS_ARCIN_V6_IDEOFFSET_2        0x3000
+#define ICS_ARCIN_V6_INTROFFSET_2       0x3200
+#define ICS_ARCIN_V6_INTRSTAT_2         0x3290
+#define ICS_ARCIN_V6_IDEALTOFFSET_2     0x3380
+#define ICS_ARCIN_V6_IDESTEPPING        6
+
+struct cardinfo {
+        unsigned int dataoffset;
+        unsigned int ctrloffset;
+        unsigned int stepping;
+};
+
+static struct cardinfo icside_cardinfo_v5 = {
+        .dataoffset     = ICS_ARCIN_V5_IDEOFFSET,
+        .ctrloffset     = ICS_ARCIN_V5_IDEALTOFFSET,
+        .stepping       = ICS_ARCIN_V5_IDESTEPPING,
+};
+
+static struct cardinfo icside_cardinfo_v6_1 = {
+        .dataoffset     = ICS_ARCIN_V6_IDEOFFSET_1,
+        .ctrloffset     = ICS_ARCIN_V6_IDEALTOFFSET_1,
+        .stepping       = ICS_ARCIN_V6_IDESTEPPING,
+};
+
+static struct cardinfo icside_cardinfo_v6_2 = {
+        .dataoffset     = ICS_ARCIN_V6_IDEOFFSET_2,
+        .ctrloffset     = ICS_ARCIN_V6_IDEALTOFFSET_2,
+        .stepping       = ICS_ARCIN_V6_IDESTEPPING,
+};
+
+struct icside_state {
+        unsigned int channel;
+        unsigned int enabled;
+        void __iomem *irq_port;
+        void __iomem *ioc_base;
+        unsigned int type;
+        /* parent device... until the IDE core gets one of its own */
+        struct device *dev;
+        ide_hwif_t *hwif[2];
+};
+
+#define ICS_TYPE_A3IN   0
+#define ICS_TYPE_A3USER 1
+#define ICS_TYPE_V6     3
+#define ICS_TYPE_V5     15
+#define ICS_TYPE_NOTYPE ((unsigned int)-1)
+
+/* ---------------- Version 5 PCB Support Functions --------------------- */
+/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
+ * Purpose  : enable interrupts from card
+ */
+static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
+{
+        struct icside_state *state = ec->irq_data;
+
+        writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
+}
+
+/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
+ * Purpose  : disable interrupts from card
+ */
+static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
+{
+        struct icside_state *state = ec->irq_data;
+
+        readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
+}
+
+static const expansioncard_ops_t icside_ops_arcin_v5 = {
+        .irqenable      = icside_irqenable_arcin_v5,
+        .irqdisable     = icside_irqdisable_arcin_v5,
+};
+
+
+/* ---------------- Version 6 PCB Support Functions --------------------- */
+/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
+ * Purpose  : enable interrupts from card
+ */
+static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
+{
+        struct icside_state *state = ec->irq_data;
+        void __iomem *base = state->irq_port;
+
+        state->enabled = 1;
+
+        switch (state->channel) {
+        case 0:
+                writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
+                readb(base + ICS_ARCIN_V6_INTROFFSET_2);
+                break;
+        case 1:
+                writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
+                readb(base + ICS_ARCIN_V6_INTROFFSET_1);
+                break;
+        }
+}
+
+/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
+ * Purpose  : disable interrupts from card
+ */
+static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
+{
+        struct icside_state *state = ec->irq_data;
+
+        state->enabled = 0;
+
+        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+}
+
+/* Prototype: icside_irqprobe(struct expansion_card *ec)
+ * Purpose  : detect an active interrupt from card
+ */
+static int icside_irqpending_arcin_v6(struct expansion_card *ec)
+{
+        struct icside_state *state = ec->irq_data;
+
+        return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
+               readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
+}
+
+static const expansioncard_ops_t icside_ops_arcin_v6 = {
+        .irqenable      = icside_irqenable_arcin_v6,
+        .irqdisable     = icside_irqdisable_arcin_v6,
+        .irqpending     = icside_irqpending_arcin_v6,
+};
+
+/*
+ * Handle routing of interrupts.  This is called before
+ * we write the command to the drive.
+ */
+static void icside_maskproc(ide_drive_t *drive, int mask)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+        struct icside_state *state = hwif->hwif_data;
+        unsigned long flags;
+
+        local_irq_save(flags);
+
+        state->channel = hwif->channel;
+
+        if (state->enabled && !mask) {
+                switch (hwif->channel) {
+                case 0:
+                        writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+                        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+                        break;
+                case 1:
+                        writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+                        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+                        break;
+                }
+        } else {
+                readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+                readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+        }
+
+        local_irq_restore(flags);
+}
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
+
+#ifndef CONFIG_IDEDMA_ICS_AUTO
+#warning CONFIG_IDEDMA_ICS_AUTO=n support is obsolete, and will be removed soon.
+#endif
+
+/*
+ * SG-DMA support.
+ *
+ * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
+ * There is only one DMA controller per card, which means that only
+ * one drive can be accessed at one time.  NOTE! We do not enforce that
+ * here, but we rely on the main IDE driver spotting that both
+ * interfaces use the same IRQ, which should guarantee this.
+ */
+
+static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
+{
+        ide_hwif_t *hwif = drive->hwif;
+        struct icside_state *state = hwif->hwif_data;
+        struct scatterlist *sg = hwif->sg_table;
+
+        ide_map_sg(drive, rq);
+
+        if (rq_data_dir(rq) == READ)
+                hwif->sg_dma_direction = DMA_FROM_DEVICE;
+        else
+                hwif->sg_dma_direction = DMA_TO_DEVICE;
+
+        hwif->sg_nents = dma_map_sg(state->dev, sg, hwif->sg_nents,
+                                    hwif->sg_dma_direction);
+}
+
+/*
+ * Configure the IOMD to give the appropriate timings for the transfer
+ * mode being requested.  We take the advice of the ATA standards, and
+ * calculate the cycle time based on the transfer mode, and the EIDE
+ * MW DMA specs that the drive provides in the IDENTIFY command.
+ *
+ * We have the following IOMD DMA modes to choose from:
+ *
+ *      Type    Active          Recovery        Cycle
+ *      A       250 (250)       312 (550)       562 (800)
+ *      B       187             250             437
+ *      C       125 (125)       125 (375)       250 (500)
+ *      D       62              125             187
+ *
+ * (figures in brackets are actual measured timings)
+ *
+ * However, we also need to take care of the read/write active and
+ * recovery timings:
+ *
+ *                      Read    Write
+ *      Mode    Active  -- Recovery --  Cycle   IOMD type
+ *      MW0     215     50      215     480     A
+ *      MW1     80      50      50      150     C
+ *      MW2     70      25      25      120     C
+ */
+static int icside_set_speed(ide_drive_t *drive, u8 xfer_mode)
+{
+        int on = 0, cycle_time = 0, use_dma_info = 0;
+
+        /*
+         * Limit the transfer speed to MW_DMA_2.
+         */
+        if (xfer_mode > XFER_MW_DMA_2)
+                xfer_mode = XFER_MW_DMA_2;
+
+        switch (xfer_mode) {
+        case XFER_MW_DMA_2:
+                cycle_time = 250;
+                use_dma_info = 1;
+                break;
+
+        case XFER_MW_DMA_1:
+                cycle_time = 250;
+                use_dma_info = 1;
+                break;
+
+        case XFER_MW_DMA_0:
+                cycle_time = 480;
+                break;
+
+        case XFER_SW_DMA_2:
+        case XFER_SW_DMA_1:
+        case XFER_SW_DMA_0:
+                cycle_time = 480;
+                break;
+        }
+
+        /*
+         * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
+         * take care to note the values in the ID...
+         */
+        if (use_dma_info && drive->id->eide_dma_time > cycle_time)
+                cycle_time = drive->id->eide_dma_time;
+
+        drive->drive_data = cycle_time;
+
+        if (cycle_time && ide_config_drive_speed(drive, xfer_mode) == 0)
+                on = 1;
+        else
+                drive->drive_data = 480;
+
+        printk("%s: %s selected (peak %dMB/s)\n", drive->name,
+                ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
+
+        drive->current_speed = xfer_mode;
+
+        return on;
+}
+
+static int icside_dma_host_off(ide_drive_t *drive)
+{
+        return 0;
+}
+
+static int icside_dma_off_quietly(ide_drive_t *drive)
+{
+        drive->using_dma = 0;
+        return icside_dma_host_off(drive);
+}
+
+static int icside_dma_host_on(ide_drive_t *drive)
+{
+        return 0;
+}
+
+static int icside_dma_on(ide_drive_t *drive)
+{
+        drive->using_dma = 1;
+        return icside_dma_host_on(drive);
+}
+
+static int icside_dma_check(ide_drive_t *drive)
+{
+        struct hd_driveid *id = drive->id;
+        ide_hwif_t *hwif = HWIF(drive);
+        int xfer_mode = XFER_PIO_2;
+        int on;
+
+        if (!(id->capability & 1) || !hwif->autodma)
+                goto out;
+
+        /*
+         * Consult the list of known "bad" drives
+         */
+        if (__ide_dma_bad_drive(drive))
+                goto out;
+
+        /*
+         * Enable DMA on any drive that has multiword DMA
+         */
+        if (id->field_valid & 2) {
+                xfer_mode = ide_dma_speed(drive, 0);
+                goto out;
+        }
+
+        /*
+         * Consult the list of known "good" drives
+         */
+        if (__ide_dma_good_drive(drive)) {
+                if (id->eide_dma_time > 150)
+                        goto out;
+                xfer_mode = XFER_MW_DMA_1;
+        }
+
+out:
+        on = icside_set_speed(drive, xfer_mode);
+
+        if (on)
+                return icside_dma_on(drive);
+        else
+                return icside_dma_off_quietly(drive);
+}
+
+static int icside_dma_end(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+        struct icside_state *state = hwif->hwif_data;
+
+        drive->waiting_for_dma = 0;
+
+        disable_dma(hwif->hw.dma);
+
+        /* Teardown mappings after DMA has completed. */
+        dma_unmap_sg(state->dev, hwif->sg_table, hwif->sg_nents,
+                     hwif->sg_dma_direction);
+
+        return get_dma_residue(hwif->hw.dma) != 0;
+}
+
+static void icside_dma_start(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+
+        /* We can not enable DMA on both channels simultaneously. */
+        BUG_ON(dma_channel_active(hwif->hw.dma));
+        enable_dma(hwif->hw.dma);
+}
+
+static int icside_dma_setup(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+        struct request *rq = hwif->hwgroup->rq;
+        unsigned int dma_mode;
+
+        if (rq_data_dir(rq))
+                dma_mode = DMA_MODE_WRITE;
+        else
+                dma_mode = DMA_MODE_READ;
+
+        /*
+         * We can not enable DMA on both channels.
+         */
+        BUG_ON(dma_channel_active(hwif->hw.dma));
+
+        icside_build_sglist(drive, rq);
+
+        /*
+         * Ensure that we have the right interrupt routed.
+         */
+        icside_maskproc(drive, 0);
+
+        /*
+         * Route the DMA signals to the correct interface.
+         */
+        writeb(hwif->select_data, hwif->config_data);
+
+        /*
+         * Select the correct timing for this drive.
+         */
+        set_dma_speed(hwif->hw.dma, drive->drive_data);
+
+        /*
+         * Tell the DMA engine about the SG table and
+         * data direction.
+         */
+        set_dma_sg(hwif->hw.dma, hwif->sg_table, hwif->sg_nents);
+        set_dma_mode(hwif->hw.dma, dma_mode);
+
+        drive->waiting_for_dma = 1;
+
+        return 0;
+}
+
+static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd)
+{
+        /* issue cmd to drive */
+        ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD, NULL);
+}
+
+static int icside_dma_test_irq(ide_drive_t *drive)
+{
+        ide_hwif_t *hwif = HWIF(drive);
+        struct icside_state *state = hwif->hwif_data;
+
+        return readb(state->irq_port +
+                     (hwif->channel ?
+                        ICS_ARCIN_V6_INTRSTAT_2 :
+                        ICS_ARCIN_V6_INTRSTAT_1)) & 1;
+}
+
+static int icside_dma_timeout(ide_drive_t *drive)
+{
+        printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
+
+        if (icside_dma_test_irq(drive))
+                return 0;
+
+        ide_dump_status(drive, "DMA timeout",
+                HWIF(drive)->INB(IDE_STATUS_REG));
+
+        return icside_dma_end(drive);
+}
+
+static int icside_dma_lostirq(ide_drive_t *drive)
+{
+        printk(KERN_ERR "%s: IRQ lost\n", drive->name);
+        return 1;
+}
+
+static void icside_dma_init(ide_hwif_t *hwif)
+{
+        int autodma = 0;
+
+#ifdef CONFIG_IDEDMA_ICS_AUTO
+        autodma = 1;
+#endif
+
+        printk("    %s: SG-DMA", hwif->name);
+
+        hwif->atapi_dma         = 1;
+        hwif->mwdma_mask        = 7; /* MW0..2 */
+        hwif->swdma_mask        = 7; /* SW0..2 */
+
+        hwif->dmatable_cpu      = NULL;
+        hwif->dmatable_dma      = 0;
+        hwif->speedproc         = icside_set_speed;
+        hwif->autodma           = autodma;
+
+        hwif->ide_dma_check     = icside_dma_check;
+        hwif->ide_dma_host_off  = icside_dma_host_off;
+        hwif->ide_dma_off_quietly = icside_dma_off_quietly;
+        hwif->ide_dma_host_on   = icside_dma_host_on;
+        hwif->ide_dma_on        = icside_dma_on;
+        hwif->dma_setup         = icside_dma_setup;
+        hwif->dma_exec_cmd      = icside_dma_exec_cmd;
+        hwif->dma_start         = icside_dma_start;
+        hwif->ide_dma_end       = icside_dma_end;
+        hwif->ide_dma_test_irq  = icside_dma_test_irq;
+        hwif->ide_dma_timeout   = icside_dma_timeout;
+        hwif->ide_dma_lostirq   = icside_dma_lostirq;
+
+        hwif->drives[0].autodma = hwif->autodma;
+        hwif->drives[1].autodma = hwif->autodma;
+
+        printk(" capable%s\n", hwif->autodma ? ", auto-enable" : "");
+}
+#else
+#define icside_dma_init(hwif)   (0)
+#endif
+
+static ide_hwif_t *icside_find_hwif(unsigned long dataport)
+{
+        ide_hwif_t *hwif;
+        int index;
+
+        for (index = 0; index < MAX_HWIFS; ++index) {
+                hwif = &ide_hwifs[index];
+                if (hwif->io_ports[IDE_DATA_OFFSET] == dataport)
+                        goto found;
+        }
+
+        for (index = 0; index < MAX_HWIFS; ++index) {
+                hwif = &ide_hwifs[index];
+                if (!hwif->io_ports[IDE_DATA_OFFSET])
+                        goto found;
+        }
+
+        hwif = NULL;
+found:
+        return hwif;
+}
+
+static ide_hwif_t *
+icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec)
+{
+        unsigned long port = (unsigned long)base + info->dataoffset;
+        ide_hwif_t *hwif;
+
+        hwif = icside_find_hwif(port);
+        if (hwif) {
+                int i;
+
+                memset(&hwif->hw, 0, sizeof(hw_regs_t));
+
+                /*
+                 * Ensure we're using MMIO
+                 */
+                default_hwif_mmiops(hwif);
+                hwif->mmio = 2;
+
+                for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+                        hwif->hw.io_ports[i] = port;
+                        hwif->io_ports[i] = port;
+                        port += 1 << info->stepping;
+                }
+                hwif->hw.io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset;
+                hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset;
+                hwif->hw.irq  = ec->irq;
+                hwif->irq     = ec->irq;
+                hwif->noprobe = 0;
+                hwif->chipset = ide_acorn;
+                hwif->gendev.parent = &ec->dev;
+        }
+
+        return hwif;
+}
+
+static int __init
+icside_register_v5(struct icside_state *state, struct expansion_card *ec)
+{
+        ide_hwif_t *hwif;
+        void __iomem *base;
+
+        base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
+                       ecard_resource_len(ec, ECARD_RES_MEMC));
+        if (!base)
+                return -ENOMEM;
+
+        state->irq_port = base;
+
+        ec->irqaddr  = base + ICS_ARCIN_V5_INTRSTAT;
+        ec->irqmask  = 1;
+        ec->irq_data = state;
+        ec->ops      = &icside_ops_arcin_v5;
+
+        /*
+         * Be on the safe side - disable interrupts
+         */
+        icside_irqdisable_arcin_v5(ec, 0);
+
+        hwif = icside_setup(base, &icside_cardinfo_v5, ec);
+        if (!hwif) {
+                iounmap(base);
+                return -ENODEV;
+        }
+
+        state->hwif[0] = hwif;
+
+        probe_hwif_init(hwif);
+        create_proc_ide_interfaces();
+
+        return 0;
+}
+
+static int __init
+icside_register_v6(struct icside_state *state, struct expansion_card *ec)
+{
+        ide_hwif_t *hwif, *mate;
+        void __iomem *ioc_base, *easi_base;
+        unsigned int sel = 0;
+        int ret;
+
+        ioc_base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
+                           ecard_resource_len(ec, ECARD_RES_IOCFAST));
+        if (!ioc_base) {
+                ret = -ENOMEM;
+                goto out;
+        }
+
+        easi_base = ioc_base;
+
+        if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
+                easi_base = ioremap(ecard_resource_start(ec, ECARD_RES_EASI),
+                                    ecard_resource_len(ec, ECARD_RES_EASI));
+                if (!easi_base) {
+                        ret = -ENOMEM;
+                        goto unmap_slot;
+                }
+
+                /*
+                 * Enable access to the EASI region.
+                 */
+                sel = 1 << 5;
+        }
+
+        writeb(sel, ioc_base);
+
+        ec->irq_data      = state;
+        ec->ops           = &icside_ops_arcin_v6;
+
+        state->irq_port   = easi_base;
+        state->ioc_base   = ioc_base;
+
+        /*
+         * Be on the safe side - disable interrupts
+         */
+        icside_irqdisable_arcin_v6(ec, 0);
+
+        /*
+         * Find and register the interfaces.
+         */
+        hwif = icside_setup(easi_base, &icside_cardinfo_v6_1, ec);
+        mate = icside_setup(easi_base, &icside_cardinfo_v6_2, ec);
+
+        if (!hwif || !mate) {
+                ret = -ENODEV;
+                goto unmap_port;
+        }
+
+        state->hwif[0]    = hwif;
+        state->hwif[1]    = mate;
+
+        hwif->maskproc    = icside_maskproc;
+        hwif->channel     = 0;
+        hwif->hwif_data   = state;
+        hwif->mate        = mate;
+        hwif->serialized  = 1;
+        hwif->config_data = (unsigned long)ioc_base;
+        hwif->select_data = sel;
+        hwif->hw.dma      = ec->dma;
+
+        mate->maskproc    = icside_maskproc;
+        mate->channel     = 1;
+        mate->hwif_data   = state;
+        mate->mate        = hwif;
+        mate->serialized  = 1;
+        mate->config_data = (unsigned long)ioc_base;
+        mate->select_data = sel | 1;
+        mate->hw.dma      = ec->dma;
+
+        if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) {
+                icside_dma_init(hwif);
+                icside_dma_init(mate);
+        }
+
+        probe_hwif_init(hwif);
+        probe_hwif_init(mate);
+        create_proc_ide_interfaces();
+
+        return 0;
+
+ unmap_port:
+        if (easi_base != ioc_base)
+                iounmap(easi_base);
+ unmap_slot:
+        iounmap(ioc_base);
+ out:
+        return ret;
+}
+
+static int __devinit
+icside_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+        struct icside_state *state;
+        void __iomem *idmem;
+        int ret;
+
+        ret = ecard_request_resources(ec);
+        if (ret)
+                goto out;
+
+        state = kmalloc(sizeof(struct icside_state), GFP_KERNEL);
+        if (!state) {
+                ret = -ENOMEM;
+                goto release;
+        }
+
+        memset(state, 0, sizeof(state));
+        state->type     = ICS_TYPE_NOTYPE;
+        state->dev      = &ec->dev;
+
+        idmem = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
+                        ecard_resource_len(ec, ECARD_RES_IOCFAST));
+        if (idmem) {
+                unsigned int type;
+
+                type = readb(idmem + ICS_IDENT_OFFSET) & 1;
+                type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
+                type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
+                type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
+                iounmap(idmem);
+
+                state->type = type;
+        }
+
+        switch (state->type) {
+        case ICS_TYPE_A3IN:
+                dev_warn(&ec->dev, "A3IN unsupported\n");
+                ret = -ENODEV;
+                break;
+
+        case ICS_TYPE_A3USER:
+                dev_warn(&ec->dev, "A3USER unsupported\n");
+                ret = -ENODEV;
+                break;
+
+        case ICS_TYPE_V5:
+                ret = icside_register_v5(state, ec);
+                break;
+
+        case ICS_TYPE_V6:
+                ret = icside_register_v6(state, ec);
+                break;
+
+        default:
+                dev_warn(&ec->dev, "unknown interface type\n");
+                ret = -ENODEV;
+                break;
+        }
+
+        if (ret == 0) {
+                ecard_set_drvdata(ec, state);
+                goto out;
+        }
+
+        kfree(state);
+ release:
+        ecard_release_resources(ec);
+ out:
+        return ret;
+}
+
+static void __devexit icside_remove(struct expansion_card *ec)
+{
+        struct icside_state *state = ecard_get_drvdata(ec);
+
+        switch (state->type) {
+        case ICS_TYPE_V5:
+                /* FIXME: tell IDE to stop using the interface */
+
+                /* Disable interrupts */
+                icside_irqdisable_arcin_v5(ec, 0);
+                break;
+
+        case ICS_TYPE_V6:
+                /* FIXME: tell IDE to stop using the interface */
+                if (ec->dma != NO_DMA)
+                        free_dma(ec->dma);
+
+                /* Disable interrupts */
+                icside_irqdisable_arcin_v6(ec, 0);
+
+                /* Reset the ROM pointer/EASI selection */
+                writeb(0, state->ioc_base);
+                break;
+        }
+
+        ecard_set_drvdata(ec, NULL);
+        ec->ops = NULL;
+        ec->irq_data = NULL;
+
+        if (state->ioc_base)
+                iounmap(state->ioc_base);
+        if (state->ioc_base != state->irq_port)
+                iounmap(state->irq_port);
+
+        kfree(state);
+        ecard_release_resources(ec);
+}
+
+static void icside_shutdown(struct expansion_card *ec)
+{
+        struct icside_state *state = ecard_get_drvdata(ec);
+        unsigned long flags;
+
+        /*
+         * Disable interrupts from this card.  We need to do
+         * this before disabling EASI since we may be accessing
+         * this register via that region.
+         */
+        local_irq_save(flags);
+        ec->ops->irqdisable(ec, 0);
+        local_irq_restore(flags);
+
+        /*
+         * Reset the ROM pointer so that we can read the ROM
+         * after a soft reboot.  This also disables access to
+         * the IDE taskfile via the EASI region.
+         */
+        if (state->ioc_base)
+                writeb(0, state->ioc_base);
+}
+
+static const struct ecard_id icside_ids[] = {
+        { MANU_ICS,  PROD_ICS_IDE  },
+        { MANU_ICS2, PROD_ICS2_IDE },
+        { 0xffff, 0xffff }
+};
+
+static struct ecard_driver icside_driver = {
+        .probe          = icside_probe,
+        .remove         = __devexit_p(icside_remove),
+        .shutdown       = icside_shutdown,
+        .id_table       = icside_ids,
+        .drv = {
+                .name   = "icside",
+        },
+};
+
+static int __init icside_init(void)
+{
+        return ecard_register_driver(&icside_driver);
+}
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ICS IDE driver");
+
+module_init(icside_init);
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
new file mode 100644
index 000000000000..23488c4d1fcd
--- /dev/null
+++ b/drivers/ide/arm/ide_arm.c
@@ -0,0 +1,43 @@
+/*
+ * ARM/ARM26 default IDE host driver
+ *
+ * Copyright (C) 2004 Bartlomiej Zolnierkiewicz
+ * Based on code by: Russell King, Ian Molton and Alexander Schulz.
+ *
+ * May be copied or modified under the terms of the GNU General Public License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_ARM26
+# define IDE_ARM_HOST   (machine_is_a5k())
+#else
+# define IDE_ARM_HOST   (1)
+#endif
+
+#ifdef CONFIG_ARCH_CLPS7500
+# include <asm/arch/hardware.h>
+#
+# define IDE_ARM_IO     (ISASLOT_IO + 0x1f0)
+# define IDE_ARM_IRQ    IRQ_ISA_14
+#else
+# define IDE_ARM_IO     0x1f0
+# define IDE_ARM_IRQ    IRQ_HARDDISK
+#endif
+
+void __init ide_arm_init(void)
+{
+        if (IDE_ARM_HOST) {
+                hw_regs_t hw;
+
+                memset(&hw, 0, sizeof(hw));
+                ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206);
+                hw.irq = IDE_ARM_IRQ;
+                ide_register_hw(&hw, NULL);
+        }
+}
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
new file mode 100644
index 000000000000..3058217767d6
--- /dev/null
+++ b/drivers/ide/arm/rapide.c
@@ -0,0 +1,125 @@
+/*
+ * linux/drivers/ide/arm/rapide.c
+ *
+ * Copyright (c) 1996-2002 Russell King.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/errno.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/ecard.h>
+
+/*
+ * Something like this really should be in generic code, but isn't.
+ */
+static ide_hwif_t *
+rapide_locate_hwif(void __iomem *base, void __iomem *ctrl, unsigned int sz, int irq)
+{
+        unsigned long port = (unsigned long)base;
+        ide_hwif_t *hwif;
+        int index, i;
+
+        for (index = 0; index < MAX_HWIFS; ++index) {
+                hwif = ide_hwifs + index;
+                if (hwif->io_ports[IDE_DATA_OFFSET] == port)
+                        goto found;
+        }
+
+        for (index = 0; index < MAX_HWIFS; ++index) {
+                hwif = ide_hwifs + index;
+                if (hwif->io_ports[IDE_DATA_OFFSET] == 0)
+                        goto found;
+        }
+
+        return NULL;
+
+ found:
+        for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+                hwif->hw.io_ports[i] = port;
+                hwif->io_ports[i] = port;
+                port += sz;
+        }
+        hwif->hw.io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl;
+        hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl;
+        hwif->hw.irq = hwif->irq = irq;
+        hwif->mmio = 2;
+        default_hwif_mmiops(hwif);
+
+        return hwif;
+}
+
+static int __devinit
+rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+        ide_hwif_t *hwif;
+        void __iomem *base;
+        int ret;
+
+        ret = ecard_request_resources(ec);
+        if (ret)
+                goto out;
+
+        base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
+                       ecard_resource_len(ec, ECARD_RES_MEMC));
+        if (!base) {
+                ret = -ENOMEM;
+                goto release;
+        }
+
+        hwif = rapide_locate_hwif(base, base + 0x818, 1 << 6, ec->irq);
+        if (hwif) {
+                hwif->hwif_data = base;
+                hwif->gendev.parent = &ec->dev;
+                hwif->noprobe = 0;
+                probe_hwif_init(hwif);
+                create_proc_ide_interfaces();
+                ecard_set_drvdata(ec, hwif);
+                goto out;
+        }
+
+        iounmap(base);
+ release:
+        ecard_release_resources(ec);
+ out:
+        return ret;
+}
+
+static void __devexit rapide_remove(struct expansion_card *ec)
+{
+        ide_hwif_t *hwif = ecard_get_drvdata(ec);
+
+        ecard_set_drvdata(ec, NULL);
+
+        /* there must be a better way */
+        ide_unregister(hwif - ide_hwifs);
+        iounmap(hwif->hwif_data);
+        ecard_release_resources(ec);
+}
+
+static struct ecard_id rapide_ids[] = {
+        { MANU_YELLOWSTONE, PROD_YELLOWSTONE_RAPIDE32 },
+        { 0xffff, 0xffff }
+};
+
+static struct ecard_driver rapide_driver = {
+        .probe          = rapide_probe,
+        .remove         = __devexit_p(rapide_remove),
+        .id_table       = rapide_ids,
+        .drv = {
+                .name   = "rapide",
+        },
+};
+
+static int __init rapide_init(void)
+{
+        return ecard_register_driver(&rapide_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Yellowstone RAPIDE driver");
+
+module_init(rapide_init);