i2c-imx: do not allow interruptions when waiting for I2C to complete

The i2c_imx_trx_complete() function is using
wait_event_interruptible_timeout() to wait for the I2C controller to
signal that it has completed an I2C bus operation. If the process that
causes the I2C operation receives a signal, the wait will be
interrupted, returning an error. It is better to let the I2C operation
finished before handling the signal (i.e. returning into userspace).

It is safe to use wait_event_timeout() instead, because the timeout
will allow the process to exit if the I2C bus hangs. It's also better
to allow the I2C operation to finish, because unacknowledged I2C
operations can cause the I2C bus to hang.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 3 insertions, 9 deletions

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index d1ff9408dc1f..4c2a62b75b5c 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -159,15 +159,9 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
 
 static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
 {
-        int result;
-
-        result = wait_event_interruptible_timeout(i2c_imx->queue,
-                i2c_imx->i2csr & I2SR_IIF, HZ / 10);
+        wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
 
-        if (unlikely(result < 0)) {
-                dev_dbg(&i2c_imx->adapter.dev, "<%s> result < 0\n", __func__);
-                return result;
-        } else if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
+        if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
                 dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
                 return -ETIMEDOUT;
         }
@@ -295,7 +289,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
                 i2c_imx->i2csr = temp;
                 temp &= ~I2SR_IIF;
                 writeb(temp, i2c_imx->base + IMX_I2C_I2SR);
-                wake_up_interruptible(&i2c_imx->queue);
+                wake_up(&i2c_imx->queue);
                 return IRQ_HANDLED;
         }