i2c-omap: Fix I2C status ACK

I2C status ack for [RX]RDR and [RX]RDY could
cause race conditions of clearing the event
twice and a violation of the programing
sequence as defined in TRM This patch fixes
the same.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 8 insertions, 1 deletions

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index d258b02aef44..94639d0aabd5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -674,7 +674,14 @@ omap_i2c_isr(int this_irq, void *dev_id)
 
                 err = 0;
 complete:
-                omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
+                /*
+                 * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be
+                 * acked after the data operation is complete.
+                 * Ref: TRM SWPU114Q Figure 18-31
+                 */
+                omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat &
+                                ~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+                                OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
 
                 if (stat & OMAP_I2C_STAT_NACK) {
                         err |= OMAP_I2C_STAT_NACK;