i2c: Delete the broken i2c-ite bus driver

The rest of the ITE8172 support was already removed from MIPS tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>

7 files changed, 0 insertions, 1226 deletions

diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index c034820615bb..af0203409dd1 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -38,17 +38,6 @@ config I2C_ALGOPCA
           This support is also available as a module.  If so, the module 
           will be called i2c-algo-pca.
 
-config I2C_ALGOITE
-        tristate "ITE I2C Algorithm"
-        depends on MIPS_ITE8172 && I2C
-        help
-          This supports the use of the ITE8172 I2C interface found on some MIPS
-          systems. Say Y if you have one of these. You should also say Y for
-          the ITE I2C peripheral driver support below.
-
-          This support is also available as a module.  If so, the module 
-          will be called i2c-algo-ite.
-
 config I2C_ALGO8XX
         tristate "MPC8xx CPM I2C interface"
         depends on 8xx && I2C
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
index 208be04a3dbd..cac1051bd4f1 100644
--- a/drivers/i2c/algos/Makefile
+++ b/drivers/i2c/algos/Makefile
@@ -5,7 +5,6 @@
 obj-$(CONFIG_I2C_ALGOBIT)       += i2c-algo-bit.o
 obj-$(CONFIG_I2C_ALGOPCF)       += i2c-algo-pcf.o
 obj-$(CONFIG_I2C_ALGOPCA)       += i2c-algo-pca.o
-obj-$(CONFIG_I2C_ALGOITE)       += i2c-algo-ite.o
 obj-$(CONFIG_I2C_ALGO_SGI)      += i2c-algo-sgi.o
 
 ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
deleted file mode 100644
index 70d8eefb5efc..000000000000
--- a/drivers/i2c/algos/i2c-algo-ite.c
+++ /dev/null
@@ -1,806 +0,0 @@
-/*
-   -------------------------------------------------------------------------
-   i2c-algo-ite.c i2c driver algorithms for ITE adapters            
-   
-   Hai-Pao Fan, MontaVista Software, Inc.
-   hpfan@mvista.com or source@mvista.com
-
-   Copyright 2000 MontaVista Software Inc.
-
-   ---------------------------------------------------------------------------
-   This file was highly leveraged from i2c-algo-pcf.c, which was created
-   by Simon G. Vogl and Hans Berglund:
-
-
-     Copyright (C) 1995-1997 Simon G. Vogl
-                   1998-2000 Hans Berglund
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and 
-   Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
-   <mbailey@littlefeet-inc.com> */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include "i2c-algo-ite.h"
-
-#define PM_DSR          IT8172_PCI_IO_BASE + IT_PM_DSR
-#define PM_IBSR         IT8172_PCI_IO_BASE + IT_PM_DSR + 0x04 
-#define GPIO_CCR        IT8172_PCI_IO_BASE + IT_GPCCR
-
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
-#define DEF_TIMEOUT 16
-
-
-/* module parameters:
- */
-static int i2c_debug;
-static int iic_test;    /* see if the line-setting functions work       */
-
-/* --- setting states on the bus with the right timing: --------------- */
-
-#define get_clock(adap) adap->getclock(adap->data)
-#define iic_outw(adap, reg, val) adap->setiic(adap->data, reg, val)
-#define iic_inw(adap, reg) adap->getiic(adap->data, reg)
-
-
-/* --- other auxiliary functions -------------------------------------- */
-
-static void iic_start(struct i2c_algo_iic_data *adap)
-{
-        iic_outw(adap,ITE_I2CHCR,ITE_CMD);
-}
-
-static void iic_stop(struct i2c_algo_iic_data *adap)
-{
-        iic_outw(adap,ITE_I2CHCR,0);
-        iic_outw(adap,ITE_I2CHSR,ITE_I2CHSR_TDI);
-}
-
-static void iic_reset(struct i2c_algo_iic_data *adap)
-{
-        iic_outw(adap, PM_IBSR, iic_inw(adap, PM_IBSR) | 0x80);
-}
-
-
-static int wait_for_bb(struct i2c_algo_iic_data *adap)
-{
-        int timeout = DEF_TIMEOUT;
-        short status;
-
-        status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
-        while (timeout-- && (status & ITE_I2CHSR_HB)) {
-                udelay(1000); /* How much is this? */
-                status = iic_inw(adap, ITE_I2CHSR);
-        }
-#endif
-        if (timeout<=0) {
-                printk(KERN_ERR "Timeout, host is busy\n");
-                iic_reset(adap);
-        }
-        return(timeout<=0);
-}
-
-/* After we issue a transaction on the IIC bus, this function
- * is called.  It puts this process to sleep until we get an interrupt from
- * from the controller telling us that the transaction we requested in complete.
- */
-static int wait_for_pin(struct i2c_algo_iic_data *adap, short *status) {
-
-        int timeout = DEF_TIMEOUT;
-        
-        timeout = wait_for_bb(adap);
-        if (timeout) {
-                DEB2(printk("Timeout waiting for host not busy\n");)
-                return -EIO;
-        }                           
-        timeout = DEF_TIMEOUT;
-
-        *status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
-        while (timeout-- && !(*status & ITE_I2CHSR_TDI)) {
-           adap->waitforpin();
-           *status = iic_inw(adap, ITE_I2CHSR);
-        }
-#endif
-        if (timeout <= 0)
-                return(-1);
-        else
-                return(0);
-}
-
-static int wait_for_fe(struct i2c_algo_iic_data *adap, short *status)
-{
-        int timeout = DEF_TIMEOUT;
-
-        *status = iic_inw(adap, ITE_I2CFSR);
-#ifndef STUB_I2C 
-        while (timeout-- && (*status & ITE_I2CFSR_FE)) {
-                udelay(1000);
-                iic_inw(adap, ITE_I2CFSR);
-        }
-#endif
-        if (timeout <= 0) 
-                return(-1);
-        else
-                return(0);
-}
-
-static int iic_init (struct i2c_algo_iic_data *adap)
-{
-        short i;
-
-        /* Clear bit 7 to set I2C to normal operation mode */
-        i=iic_inw(adap, PM_DSR)& 0xff7f;
-        iic_outw(adap, PM_DSR, i);
-
-        /* set IT_GPCCR port C bit 2&3 as function 2 */
-        i = iic_inw(adap, GPIO_CCR) & 0xfc0f;
-        iic_outw(adap,GPIO_CCR,i);
-
-        /* Clear slave address/sub-address */
-        iic_outw(adap,ITE_I2CSAR, 0);
-        iic_outw(adap,ITE_I2CSSAR, 0);
-
-        /* Set clock counter register */
-        iic_outw(adap,ITE_I2CCKCNT, get_clock(adap));
-
-        /* Set START/reSTART/STOP time registers */
-        iic_outw(adap,ITE_I2CSHDR, 0x0a);
-        iic_outw(adap,ITE_I2CRSUR, 0x0a);
-        iic_outw(adap,ITE_I2CPSUR, 0x0a);
-
-        /* Enable interrupts on completing the current transaction */
-        iic_outw(adap,ITE_I2CHCR, ITE_I2CHCR_IE | ITE_I2CHCR_HCE);
-
-        /* Clear transfer count */
-        iic_outw(adap,ITE_I2CFBCR, 0x0);
-
-        DEB2(printk("iic_init: Initialized IIC on ITE 0x%x\n",
-                iic_inw(adap, ITE_I2CHSR)));
-        return 0;
-}
-
-
-/*
- * Sanity check for the adapter hardware - check the reaction of
- * the bus lines only if it seems to be idle.
- */
-static int test_bus(struct i2c_algo_iic_data *adap, char *name) {
-#if 0
-        int scl,sda;
-        sda=getsda(adap);
-        if (adap->getscl==NULL) {
-                printk("test_bus: Warning: Adapter can't read from clock line - skipping test.\n");
-                return 0;               
-        }
-        scl=getscl(adap);
-        printk("test_bus: Adapter: %s scl: %d  sda: %d -- testing...\n",
-        name,getscl(adap),getsda(adap));
-        if (!scl || !sda ) {
-                printk("test_bus: %s seems to be busy.\n",adap->name);
-                goto bailout;
-        }
-        sdalo(adap);
-        printk("test_bus:1 scl: %d  sda: %d\n", getscl(adap),
-               getsda(adap));
-        if ( 0 != getsda(adap) ) {
-                printk("test_bus: %s SDA stuck high!\n",name);
-                sdahi(adap);
-                goto bailout;
-        }
-        if ( 0 == getscl(adap) ) {
-                printk("test_bus: %s SCL unexpected low while pulling SDA low!\n",
-                        name);
-                goto bailout;
-        }               
-        sdahi(adap);
-        printk("test_bus:2 scl: %d  sda: %d\n", getscl(adap),
-               getsda(adap));
-        if ( 0 == getsda(adap) ) {
-                printk("test_bus: %s SDA stuck low!\n",name);
-                sdahi(adap);
-                goto bailout;
-        }
-        if ( 0 == getscl(adap) ) {
-                printk("test_bus: %s SCL unexpected low while SDA high!\n",
-                       adap->name);
-        goto bailout;
-        }
-        scllo(adap);
-        printk("test_bus:3 scl: %d  sda: %d\n", getscl(adap),
-               getsda(adap));
-        if ( 0 != getscl(adap) ) {
-
-                sclhi(adap);
-                goto bailout;
-        }
-        if ( 0 == getsda(adap) ) {
-                printk("test_bus: %s SDA unexpected low while pulling SCL low!\n",
-                        name);
-                goto bailout;
-        }
-        sclhi(adap);
-        printk("test_bus:4 scl: %d  sda: %d\n", getscl(adap),
-               getsda(adap));
-        if ( 0 == getscl(adap) ) {
-                printk("test_bus: %s SCL stuck low!\n",name);
-                sclhi(adap);
-                goto bailout;
-        }
-        if ( 0 == getsda(adap) ) {
-                printk("test_bus: %s SDA unexpected low while SCL high!\n",
-                        name);
-                goto bailout;
-        }
-        printk("test_bus: %s passed test.\n",name);
-        return 0;
-bailout:
-        sdahi(adap);
-        sclhi(adap);
-        return -ENODEV;
-#endif
-        return (0);
-}
-
-/* ----- Utility functions
- */
-
-
-/* Verify the device we want to talk to on the IIC bus really exists. */
-static inline int try_address(struct i2c_algo_iic_data *adap,
-                       unsigned int addr, int retries)
-{
-        int i, ret = -1;
-        short status;
-
-        for (i=0;i<retries;i++) {
-                iic_outw(adap, ITE_I2CSAR, addr);
-                iic_start(adap);
-                if (wait_for_pin(adap, &status) == 0) {
-                        if ((status & ITE_I2CHSR_DNE) == 0) { 
-                                iic_stop(adap);
-                                iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-                                ret=1;
-                                break;  /* success! */
-                        }
-                }
-                iic_stop(adap);
-                udelay(adap->udelay);
-        }
-        DEB2(if (i) printk("try_address: needed %d retries for 0x%x\n",i,
-                           addr));
-        return ret;
-}
-
-
-static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf,
-                         int count)
-{
-        struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
-        int wrcount=0, timeout;
-        short status;
-        int loops, remainder, i, j;
-        union {
-                char byte[2];
-                unsigned short word;
-        } tmp;
-   
-        iic_outw(adap, ITE_I2CSSAR, (unsigned short)buf[wrcount++]);
-        count--;
-        if (count == 0)
-                return -EIO;
-
-        loops =  count / 32;            /* 32-byte FIFO */
-        remainder = count % 32;
-
-        if(loops) {
-                for(i=0; i<loops; i++) {
-
-                        iic_outw(adap, ITE_I2CFBCR, 32);
-                        for(j=0; j<32/2; j++) {
-                                tmp.byte[1] = buf[wrcount++];
-                                tmp.byte[0] = buf[wrcount++];
-                                iic_outw(adap, ITE_I2CFDR, tmp.word); 
-                        }
-
-                        /* status FIFO overrun */
-                        iic_inw(adap, ITE_I2CFSR);
-                        iic_inw(adap, ITE_I2CFBCR);
-
-                        iic_outw(adap, ITE_I2CHCR, ITE_WRITE);  /* Issue WRITE command */
-
-                        /* Wait for transmission to complete */
-                        timeout = wait_for_pin(adap, &status);
-                        if(timeout) {
-                                iic_stop(adap);
-                                printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
-                                return -EREMOTEIO; /* got a better one ?? */
-        }
-                        if (status & ITE_I2CHSR_DB) {
-                                iic_stop(adap);
-                                printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
-                                return -EREMOTEIO; /* got a better one ?? */
-                        }
-                }
-        }
-        if(remainder) {
-                iic_outw(adap, ITE_I2CFBCR, remainder);
-                for(i=0; i<remainder/2; i++) {
-                        tmp.byte[1] = buf[wrcount++];
-                        tmp.byte[0] = buf[wrcount++];
-                        iic_outw(adap, ITE_I2CFDR, tmp.word);
-                }
-
-                /* status FIFO overrun */
-                iic_inw(adap, ITE_I2CFSR);
-                iic_inw(adap, ITE_I2CFBCR);
-
-                iic_outw(adap, ITE_I2CHCR, ITE_WRITE);  /* Issue WRITE command */
-
-                timeout = wait_for_pin(adap, &status);
-                if(timeout) {
-                        iic_stop(adap);
-                        printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
-                        return -EREMOTEIO; /* got a better one ?? */
-                }
-#ifndef STUB_I2C
-                if (status & ITE_I2CHSR_DB) { 
-                        iic_stop(adap);
-                        printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
-                        return -EREMOTEIO; /* got a better one ?? */
-                }
-#endif
-        }
-        iic_stop(adap);
-        return wrcount;
-}
-
-
-static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count,
-        int sread)
-{
-        int rdcount=0, i, timeout;
-        short status;
-        struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
-        int loops, remainder, j;
-        union {
-                char byte[2];
-                unsigned short word;
-        } tmp;
-                
-        loops = count / 32;                             /* 32-byte FIFO */
-        remainder = count % 32;
-
-        if(loops) {
-                for(i=0; i<loops; i++) {
-                        iic_outw(adap, ITE_I2CFBCR, 32);
-                        if (sread)
-                                iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
-                        else
-                                iic_outw(adap, ITE_I2CHCR, ITE_READ);           /* Issue READ command */
-
-                        timeout = wait_for_pin(adap, &status);
-                        if(timeout) {
-                                iic_stop(adap);
-                                printk("iic_readbytes:  %s read timeout.\n", i2c_adap->name);
-                                return (-1);
-                        }
-#ifndef STUB_I2C
-                        if (status & ITE_I2CHSR_DB) {
-                                iic_stop(adap);
-                                printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
-                                return (-1);
-                        }
-#endif
-
-                        timeout = wait_for_fe(adap, &status);
-                        if(timeout) {
-                                iic_stop(adap);
-                                printk("iic_readbytes:  %s FIFO is empty\n", i2c_adap->name);
-                                return (-1); 
-                        }
-
-                        for(j=0; j<32/2; j++) {
-                                tmp.word = iic_inw(adap, ITE_I2CFDR);
-                                buf[rdcount++] = tmp.byte[1];
-                                buf[rdcount++] = tmp.byte[0];
-                        }
-
-                        /* status FIFO underrun */
-                        iic_inw(adap, ITE_I2CFSR);
-
-                }
-        }
-
-
-        if(remainder) {
-                remainder=(remainder+1)/2 * 2;
-                iic_outw(adap, ITE_I2CFBCR, remainder);
-                if (sread)
-                        iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
-                else
-                iic_outw(adap, ITE_I2CHCR, ITE_READ);           /* Issue READ command */
-
-                timeout = wait_for_pin(adap, &status);
-                if(timeout) {
-                        iic_stop(adap);
-                        printk("iic_readbytes:  %s read timeout.\n", i2c_adap->name);
-                        return (-1);
-                }
-#ifndef STUB_I2C
-                if (status & ITE_I2CHSR_DB) {
-                        iic_stop(adap);
-                        printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
-                        return (-1);
-                }
-#endif
-                timeout = wait_for_fe(adap, &status);
-                if(timeout) {
-                        iic_stop(adap);
-                        printk("iic_readbytes:  %s FIFO is empty\n", i2c_adap->name);
-                        return (-1);
-                }         
-
-                for(i=0; i<(remainder+1)/2; i++) {
-                        tmp.word = iic_inw(adap, ITE_I2CFDR);
-                        buf[rdcount++] = tmp.byte[1];
-                        buf[rdcount++] = tmp.byte[0];
-                }
-
-                /* status FIFO underrun */
-                iic_inw(adap, ITE_I2CFSR);
-
-        }
-
-        iic_stop(adap);
-        return rdcount;
-}
-
-
-/* This function implements combined transactions.  Combined
- * transactions consist of combinations of reading and writing blocks of data.
- * Each transfer (i.e. a read or a write) is separated by a repeated start
- * condition.
- */
-#if 0
-static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) 
-{
-   int i;
-   struct i2c_msg *pmsg;
-   int ret;
-
-   DEB2(printk("Beginning combined transaction\n"));
-
-   for(i=0; i<(num-1); i++) {
-      pmsg = &msgs[i];
-      if(pmsg->flags & I2C_M_RD) {
-         DEB2(printk("  This one is a read\n"));
-         ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
-      }
-      else if(!(pmsg->flags & I2C_M_RD)) {
-         DEB2(printk("This one is a write\n"));
-         ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
-      }
-   }
-   /* Last read or write segment needs to be terminated with a stop */
-   pmsg = &msgs[i];
-
-   if(pmsg->flags & I2C_M_RD) {
-      DEB2(printk("Doing the last read\n"));
-      ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
-   }
-   else if(!(pmsg->flags & I2C_M_RD)) {
-      DEB2(printk("Doing the last write\n"));
-      ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
-   }
-
-   return ret;
-}
-#endif
-
-
-/* Whenever we initiate a transaction, the first byte clocked
- * onto the bus after the start condition is the address (7 bit) of the
- * device we want to talk to.  This function manipulates the address specified
- * so that it makes sense to the hardware when written to the IIC peripheral.
- *
- * Note: 10 bit addresses are not supported in this driver, although they are
- * supported by the hardware.  This functionality needs to be implemented.
- */
-static inline int iic_doAddress(struct i2c_algo_iic_data *adap,
-                                struct i2c_msg *msg, int retries) 
-{
-        unsigned short flags = msg->flags;
-        unsigned int addr;
-        int ret;
-
-/* Ten bit addresses not supported right now */
-        if ( (flags & I2C_M_TEN)  ) { 
-#if 0
-                addr = 0xf0 | (( msg->addr >> 7) & 0x03);
-                DEB2(printk("addr0: %d\n",addr));
-                ret = try_address(adap, addr, retries);
-                if (ret!=1) {
-                        printk("iic_doAddress: died at extended address code.\n");
-                        return -EREMOTEIO;
-                }
-                iic_outw(adap,msg->addr & 0x7f);
-                if (ret != 1) {
-                        printk("iic_doAddress: died at 2nd address code.\n");
-                        return -EREMOTEIO;
-                }
-                if ( flags & I2C_M_RD ) {
-                        i2c_repstart(adap);
-                        addr |= 0x01;
-                        ret = try_address(adap, addr, retries);
-                        if (ret!=1) {
-                                printk("iic_doAddress: died at extended address code.\n");
-                                return -EREMOTEIO;
-                        }
-                }
-#endif
-        } else {
-
-                addr = ( msg->addr << 1 );
-
-#if 0
-                if (flags & I2C_M_RD )
-                        addr |= 1;
-                if (flags & I2C_M_REV_DIR_ADDR )
-                        addr ^= 1;
-#endif
-
-                if (iic_inw(adap, ITE_I2CSAR) != addr) {
-                        iic_outw(adap, ITE_I2CSAR, addr);
-                        ret = try_address(adap, addr, retries);
-                        if (ret!=1) {
-                                printk("iic_doAddress: died at address code.\n");
-                                return -EREMOTEIO;
-                        }
-                }
-
-  }
-
-        return 0;
-}
-
-
-/* Description: Prepares the controller for a transaction (clearing status
- * registers, data buffers, etc), and then calls either iic_readbytes or
- * iic_sendbytes to do the actual transaction.
- *
- * still to be done: Before we issue a transaction, we should
- * verify that the bus is not busy or in some unknown state.
- */
-static int iic_xfer(struct i2c_adapter *i2c_adap,
-                    struct i2c_msg *msgs, 
-                    int num)
-{
-        struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
-        struct i2c_msg *pmsg;
-        int i = 0;
-        int ret, timeout;
-    
-        pmsg = &msgs[i];
-
-        if(!pmsg->len) {
-                DEB2(printk("iic_xfer: read/write length is 0\n");)
-                return -EIO;
-        }
-        if(!(pmsg->flags & I2C_M_RD) && (!(pmsg->len)%2) ) {
-                DEB2(printk("iic_xfer: write buffer length is not odd\n");)
-                return -EIO; 
-        }
-
-        /* Wait for any pending transfers to complete */
-        timeout = wait_for_bb(adap);
-        if (timeout) {
-                DEB2(printk("iic_xfer: Timeout waiting for host not busy\n");)
-                return -EIO;
-        }
-
-        /* Flush FIFO */
-        iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
-        /* Load address */
-        ret = iic_doAddress(adap, pmsg, i2c_adap->retries);
-        if (ret)
-                return -EIO;
-
-#if 0
-        /* Combined transaction (read and write) */
-        if(num > 1) {
-           DEB2(printk("iic_xfer: Call combined transaction\n"));
-           ret = iic_combined_transaction(i2c_adap, msgs, num);
-  }
-#endif
-
-        DEB3(printk("iic_xfer: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
-                i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
-
-        if(pmsg->flags & I2C_M_RD)              /* Read */
-                ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, 0);
-        else {                                                                                                  /* Write */ 
-                udelay(1000);
-                ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len);
-        }
-
-        if (ret != pmsg->len)
-                DEB3(printk("iic_xfer: error or fail on read/write %d bytes.\n",ret)); 
-        else
-                DEB3(printk("iic_xfer: read/write %d bytes.\n",ret));
-
-        return ret;
-}
-
-
-/* Implements device specific ioctls.  Higher level ioctls can
- * be found in i2c-core.c and are typical of any i2c controller (specifying
- * slave address, timeouts, etc).  These ioctls take advantage of any hardware
- * features built into the controller for which this algorithm-adapter set
- * was written.  These ioctls allow you to take control of the data and clock
- * lines and set the either high or low,
- * similar to a GPIO pin.
- */
-static int algo_control(struct i2c_adapter *adapter, 
-        unsigned int cmd, unsigned long arg)
-{
-
-  struct i2c_algo_iic_data *adap = adapter->algo_data;
-  struct i2c_iic_msg s_msg;
-  char *buf;
-        int ret;
-
-  if (cmd == I2C_SREAD) {
-                if(copy_from_user(&s_msg, (struct i2c_iic_msg *)arg, 
-                                sizeof(struct i2c_iic_msg))) 
-                        return -EFAULT;
-                buf = kmalloc(s_msg.len, GFP_KERNEL);
-                if (buf== NULL)
-                        return -ENOMEM;
-
-                /* Flush FIFO */
-                iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
-                /* Load address */
-                iic_outw(adap, ITE_I2CSAR,s_msg.addr<<1);
-                iic_outw(adap, ITE_I2CSSAR,s_msg.waddr & 0xff);
-
-                ret = iic_readbytes(adapter, buf, s_msg.len, 1);
-                if (ret>=0) {
-                        if(copy_to_user( s_msg.buf, buf, s_msg.len) ) 
-                                ret = -EFAULT;
-                }
-                kfree(buf);
-        }
-        return 0;
-}
-
-
-static u32 iic_func(struct i2c_adapter *adap)
-{
-        return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | 
-               I2C_FUNC_PROTOCOL_MANGLING; 
-}
-
-/* -----exported algorithm data: -------------------------------------  */
-
-static struct i2c_algorithm iic_algo = {
-        .master_xfer    = iic_xfer,
-        .algo_control   = algo_control, /* ioctl */
-        .functionality  = iic_func,
-};
-
-
-/* 
- * registering functions to load algorithms at runtime 
- */
-int i2c_iic_add_bus(struct i2c_adapter *adap)
-{
-        struct i2c_algo_iic_data *iic_adap = adap->algo_data;
-
-        if (iic_test) {
-                int ret = test_bus(iic_adap, adap->name);
-                if (ret<0)
-                        return -ENODEV;
-        }
-
-        DEB2(printk("i2c-algo-ite: hw routines for %s registered.\n",
-                    adap->name));
-
-        /* register new adapter to i2c module... */
-        adap->algo = &iic_algo;
-
-        adap->timeout = 100;    /* default values, should       */
-        adap->retries = 3;              /* be replaced by defines       */
-        adap->flags = 0;
-
-        iic_init(iic_adap);
-        return i2c_add_adapter(adap);
-}
-
-
-int i2c_iic_del_bus(struct i2c_adapter *adap)
-{
-        int res;
-        if ((res = i2c_del_adapter(adap)) < 0)
-                return res;
-        DEB2(printk("i2c-algo-ite: adapter unregistered: %s\n",adap->name));
-
-        return 0;
-}
-
-
-int __init i2c_algo_iic_init (void)
-{
-        printk(KERN_INFO "ITE iic (i2c) algorithm module\n");
-        return 0;
-}
-
-
-void i2c_algo_iic_exit(void)
-{
-        return;
-}
-
-
-EXPORT_SYMBOL(i2c_iic_add_bus);
-EXPORT_SYMBOL(i2c_iic_del_bus);
-
-/* The MODULE_* macros resolve to nothing if MODULES is not defined
- * when this file is compiled.
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("ITE iic algorithm");
-MODULE_LICENSE("GPL");
-
-module_param(iic_test, bool, 0);
-module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
-
-MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available");
-MODULE_PARM_DESC(i2c_debug,
-        "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
-
-
-/* This function resolves to init_module (the function invoked when a module
- * is loaded via insmod) when this file is compiled with MODULES defined.
- * Otherwise (i.e. if you want this driver statically linked to the kernel),
- * a pointer to this function is stored in a table and called
- * during the initialization of the kernel (in do_basic_setup in /init/main.c) 
- *
- * All this functionality is complements of the macros defined in linux/init.h
- */
-module_init(i2c_algo_iic_init);
-
-
-/* If MODULES is defined when this file is compiled, then this function will
- * resolved to cleanup_module.
- */
-module_exit(i2c_algo_iic_exit);
diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h
deleted file mode 100644
index a8ca3c9b546a..000000000000
--- a/drivers/i2c/algos/i2c-algo-ite.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
-   --------------------------------------------------------------------
-   i2c-ite.h: Global defines for the I2C controller on board the    
-                 ITE MIPS processor.                                
-   --------------------------------------------------------------------
-   Hai-Pao Fan, MontaVista Software, Inc.
-   hpfan@mvista.com or source@mvista.com
-
-   Copyright 2001 MontaVista Software Inc.
-
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-
-#ifndef I2C_ITE_H
-#define I2C_ITE_H 1
-
-#include <asm/it8172/it8172.h>
-
-/* I2C Registers */
-#define ITE_I2CHCR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
-#define ITE_I2CHSR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
-#define ITE_I2CSAR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
-#define ITE_I2CSSAR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
-#define ITE_I2CCKCNT    IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
-#define ITE_I2CSHDR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
-#define ITE_I2CRSUR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
-#define ITE_I2CPSUR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
-
-#define ITE_I2CFDR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
-#define ITE_I2CFBCR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
-#define ITE_I2CFCR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
-#define ITE_I2CFSR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
-
-
-/* Host Control Register ITE_I2CHCR */
-#define ITE_I2CHCR_HCE  0x01    /* Enable I2C Host Controller */
-#define ITE_I2CHCR_IE   0x02    /* Enable the interrupt after completing
-                                   the current transaction */
-#define ITE_I2CHCR_CP_W 0x00    /* bit2-4 000 - Write */
-#define ITE_I2CHCR_CP_R 0x08    /*        010 - Current address read */
-#define ITE_I2CHCR_CP_S 0x10    /*        100 - Sequential read */
-#define ITE_I2CHCR_ST   0x20    /* Initiates the I2C host controller to execute
-                                   the command and send the data programmed in
-                                   all required registers to I2C bus */
-#define ITE_CMD         ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
-#define ITE_WRITE       ITE_CMD | ITE_I2CHCR_CP_W
-#define ITE_READ        ITE_CMD | ITE_I2CHCR_CP_R
-#define ITE_SREAD       ITE_CMD | ITE_I2CHCR_CP_S
-
-/* Host Status Register ITE_I2CHSR */
-#define ITE_I2CHSR_DB   0x01    /* Device is busy, receives NACK response except
-                                   in the first and last bytes */
-#define ITE_I2CHSR_DNE  0x02    /* Target address on I2C bus does not exist */
-#define ITE_I2CHSR_TDI  0x04    /* R/W Transaction on I2C bus was completed */
-#define ITE_I2CHSR_HB   0x08    /* Host controller is processing transactions */
-#define ITE_I2CHSR_FER  0x10    /* Error occurs in the FIFO */
-
-/* Slave Address Register ITE_I2CSAR */
-#define ITE_I2CSAR_SA_MASK      0xfe    /* Target I2C device address */
-#define ITE_I2CSAR_ASO          0x0100  /* Output 1/0 to I2CAS port when the
-                                           next slave address is addressed */
-
-/* Slave Sub-address Register ITE_I2CSSAR */
-#define ITE_I2CSSAR_SUBA_MASK   0xff    /* Target I2C device sub-address */
-
-/* Clock Counter Register ITE_I2CCKCNT */
-#define ITE_I2CCKCNT_STOP       0x00    /* stop I2C clock */
-#define ITE_I2CCKCNT_HPCC_MASK  0x7f    /* SCL high period counter */
-#define ITE_I2CCKCNT_LPCC_MASK  0x7f00  /* SCL low period counter */
-
-/* START Hold Time Register ITE_I2CSHDR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CSHDR_FM  0x0a    /* START condition at fast mode */
-#define ITE_I2CSHDR_SM  0x47    /* START contition at standard mode */
-
-/* (Repeated) START Setup Time Register ITE_I2CRSUR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CRSUR_FM  0x0a    /* repeated START condition at fast mode */
-#define ITE_I2CRSUR_SM  0x50    /* repeated START condition at standard mode */
-
-/* STOP setup Time Register ITE_I2CPSUR */
-
-/* FIFO Data Register ITE_I2CFDR */
-#define ITE_I2CFDR_MASK         0xff
-
-/* FIFO Byte Count Register ITE_I2CFBCR */
-#define ITE_I2CFBCR_MASK        0x3f
-
-/* FIFO Control Register ITE_I2CFCR */
-#define ITE_I2CFCR_FLUSH        0x01    /* Flush FIFO and reset the FIFO point
-                                           and I2CFSR */
-/* FIFO Status Register ITE_I2CFSR */
-#define ITE_I2CFSR_FO   0x01    /* FIFO is overrun when write */
-#define ITE_I2CFSR_FU   0x02    /* FIFO is underrun when read */
-#define ITE_I2CFSR_FF   0x04    /* FIFO is full when write */
-#define ITE_I2CFSR_FE   0x08    /* FIFO is empty when read */
-
-#endif  /* I2C_ITE_H */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 90f91d039ee2..7c9ab337d180 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -209,18 +209,6 @@ config I2C_ISA
         tristate
         depends on I2C
 
-config I2C_ITE
-        tristate "ITE I2C Adapter"
-        depends on I2C && MIPS_ITE8172
-        select I2C_ALGOITE
-        help
-          This supports the ITE8172 I2C peripheral found on some MIPS
-          systems. Say Y if you have one of these. You should also say Y for
-          the ITE I2C driver algorithm support above.
-
-          This support is also available as a module.  If so, the module 
-          will be called i2c-ite.
-
 config I2C_IXP4XX
         tristate "IXP4xx GPIO-Based I2C Interface"
         depends on I2C && ARCH_IXP4XX
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 493c87289b62..bf5fd078b292 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
 obj-$(CONFIG_I2C_IBM_IIC)       += i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IOP3XX)        += i2c-iop3xx.o
 obj-$(CONFIG_I2C_ISA)           += i2c-isa.o
-obj-$(CONFIG_I2C_ITE)           += i2c-ite.o
 obj-$(CONFIG_I2C_IXP2000)       += i2c-ixp2000.o
 obj-$(CONFIG_I2C_IXP4XX)        += i2c-ixp4xx.o
 obj-$(CONFIG_I2C_POWERMAC)      += i2c-powermac.o
diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c
deleted file mode 100644
index f7d71869b3b9..000000000000
--- a/drivers/i2c/busses/i2c-ite.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
-   -------------------------------------------------------------------------
-   i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system
-   -------------------------------------------------------------------------
-   Hai-Pao Fan, MontaVista Software, Inc.
-   hpfan@mvista.com or source@mvista.com
-
-   Copyright 2001 MontaVista Software Inc.
-
-   ----------------------------------------------------------------------------
-   This file was highly leveraged from i2c-elektor.c, which was created
-   by Simon G. Vogl and Hans Berglund:
-
- 
-     Copyright (C) 1995-97 Simon G. Vogl
-                   1998-99 Hans Berglund
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl> */
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include <linux/i2c-adap-ite.h>
-#include "../i2c-ite.h"
-
-#define DEFAULT_BASE  0x14014030
-#define ITE_IIC_IO_SIZE 0x40
-#define DEFAULT_IRQ   0
-#define DEFAULT_CLOCK 0x1b0e    /* default 16MHz/(27+14) = 400KHz */
-#define DEFAULT_OWN   0x55
-
-static int base;
-static int irq;
-static int clock;
-static int own;
-
-static struct iic_ite gpi;
-static wait_queue_head_t iic_wait;
-static int iic_pending;
-static spinlock_t lock;
-
-/* ----- local functions ---------------------------------------------- */
-
-static void iic_ite_setiic(void *data, int ctl, short val)
-{
-        unsigned long j = jiffies + 10;
-
-        pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff);
-#ifdef DEBUG
-        while (time_before(jiffies, j))
-                schedule();
-#endif
-        outw(val,ctl);
-}
-
-static short iic_ite_getiic(void *data, int ctl)
-{
-        short val;
-
-        val = inw(ctl);
-        pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff);
-        return (val);
-}
-
-/* Return our slave address.  This is the address
- * put on the I2C bus when another master on the bus wants to address us
- * as a slave
- */
-static int iic_ite_getown(void *data)
-{
-        return (gpi.iic_own);
-}
-
-
-static int iic_ite_getclock(void *data)
-{
-        return (gpi.iic_clock);
-}
-
-
-/* Put this process to sleep.  We will wake up when the
- * IIC controller interrupts.
- */
-static void iic_ite_waitforpin(void) {
-   DEFINE_WAIT(wait);
-   int timeout = 2;
-   unsigned long flags;
-
-   /* If interrupts are enabled (which they are), then put the process to
-    * sleep.  This process will be awakened by two events -- either the
-    * the IIC peripheral interrupts or the timeout expires. 
-    * If interrupts are not enabled then delay for a reasonable amount 
-    * of time and return.
-    */
-   if (gpi.iic_irq > 0) {
-        spin_lock_irqsave(&lock, flags);
-        if (iic_pending == 0) {
-                spin_unlock_irqrestore(&lock, flags);
-                prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE);
-                if (schedule_timeout(timeout*HZ)) {
-                        spin_lock_irqsave(&lock, flags);
-                        if (iic_pending == 1) {
-                                iic_pending = 0;
-                        }
-                        spin_unlock_irqrestore(&lock, flags);
-                }
-                finish_wait(&iic_wait, &wait);
-        } else {
-                iic_pending = 0;
-                spin_unlock_irqrestore(&lock, flags);
-        }
-   } else {
-      udelay(100);
-   }
-}
-
-
-static irqreturn_t iic_ite_handler(int this_irq, void *dev_id)
-{
-        spin_lock(&lock);
-        iic_pending = 1;
-        spin_unlock(&lock);
-
-        wake_up_interruptible(&iic_wait);
-
-        return IRQ_HANDLED;
-}
-
-
-/* Lock the region of memory where I/O registers exist.  Request our
- * interrupt line and register its associated handler.
- */
-static int iic_hw_resrc_init(void)
-{
-        if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c"))
-                return -ENODEV;
-  
-        if (gpi.iic_irq <= 0)
-                return 0;
-
-        if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0)
-                gpi.iic_irq = 0;
-        else
-                enable_irq(gpi.iic_irq);
-
-        return 0;
-}
-
-
-static void iic_ite_release(void)
-{
-        if (gpi.iic_irq > 0) {
-                disable_irq(gpi.iic_irq);
-                free_irq(gpi.iic_irq, 0);
-        }
-        release_region(gpi.iic_base , 2);
-}
-
-/* ------------------------------------------------------------------------
- * Encapsulate the above functions in the correct operations structure.
- * This is only done when more than one hardware adapter is supported.
- */
-static struct i2c_algo_iic_data iic_ite_data = {
-        NULL,
-        iic_ite_setiic,
-        iic_ite_getiic,
-        iic_ite_getown,
-        iic_ite_getclock,
-        iic_ite_waitforpin,
-        80, 80, 100,            /*      waits, timeout */
-};
-
-static struct i2c_adapter iic_ite_ops = {
-        .owner          = THIS_MODULE,
-        .id             = I2C_HW_I_IIC,
-        .algo_data      = &iic_ite_data,
-        .name           = "ITE IIC adapter",
-};
-
-/* Called when the module is loaded.  This function starts the
- * cascade of calls up through the hierarchy of i2c modules (i.e. up to the
- *  algorithm layer and into to the core layer)
- */
-static int __init iic_ite_init(void) 
-{
-
-        struct iic_ite *piic = &gpi;
-
-        printk(KERN_INFO "Initialize ITE IIC adapter module\n");
-        if (base == 0)
-                piic->iic_base = DEFAULT_BASE;
-        else
-                piic->iic_base = base;
-
-        if (irq == 0)
-                piic->iic_irq = DEFAULT_IRQ;
-        else
-                piic->iic_irq = irq;
-
-        if (clock == 0)
-                piic->iic_clock = DEFAULT_CLOCK;
-        else
-                piic->iic_clock = clock;
-
-        if (own == 0)
-                piic->iic_own = DEFAULT_OWN;
-        else
-                piic->iic_own = own;
-
-        iic_ite_data.data = (void *)piic;
-        init_waitqueue_head(&iic_wait);
-        spin_lock_init(&lock);
-        if (iic_hw_resrc_init() == 0) {
-                if (i2c_iic_add_bus(&iic_ite_ops) < 0)
-                        return -ENODEV;
-        } else {
-                return -ENODEV;
-        }
-        printk(KERN_INFO " found device at %#x irq %d.\n", 
-                piic->iic_base, piic->iic_irq);
-        return 0;
-}
-
-
-static void iic_ite_exit(void)
-{
-        i2c_iic_del_bus(&iic_ite_ops);
-        iic_ite_release();
-}
-
-/* If modules is NOT defined when this file is compiled, then the MODULE_*
- * macros will resolve to nothing
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter");
-MODULE_LICENSE("GPL");
-
-module_param(base, int, 0);
-module_param(irq, int, 0);
-module_param(clock, int, 0);
-module_param(own, int, 0);
-
-
-/* Called when module is loaded or when kernel is initialized.
- * If MODULES is defined when this file is compiled, then this function will
- * resolve to init_module (the function called when insmod is invoked for a
- * module).  Otherwise, this function is called early in the boot, when the
- * kernel is intialized.  Check out /include/init.h to see how this works.
- */
-module_init(iic_ite_init);
-
-/* Resolves to module_cleanup when MODULES is defined. */
-module_exit(iic_ite_exit);