Merge tag 'v3.0-rc4' of /pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus

14 files changed, 346 insertions, 196 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 326652f673f7..646068e5100b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -79,6 +79,7 @@ config I2C_AMD8111
 config I2C_I801
         tristate "Intel 82801 (ICH/PCH)"
         depends on PCI
+        select CHECK_SIGNATURE if X86 && DMI
         help
           If you say yes to this option, support will be included for the Intel
           801 family of mainboard I2C interfaces.  Specifically, the following
@@ -101,6 +102,7 @@ config I2C_I801
             6 Series (PCH)
             Patsburg (PCH)
             DH89xxCC (PCH)
+            Panther Point (PCH)
 
           This driver can also be built as a module.  If so, the module
           will be called i2c-i801.
@@ -671,15 +673,19 @@ config I2C_XILINX
           will be called xilinx_i2c.
 
 config I2C_EG20T
-        tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH"
+        tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223)"
         depends on PCI
         help
           This driver is for PCH(Platform controller Hub) I2C of EG20T which
           is an IOH(Input/Output Hub) for x86 embedded processor.
           This driver can access PCH I2C bus device.
 
-          This driver also supports the ML7213, a companion chip for the
-          Atom E6xx series and compatible with the Intel EG20T PCH.
+          This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+          Output Hub), ML7213 and ML7223.
+          ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
+          for MP(Media Phone) use.
+          ML7213/ML7223 is companion chip for Intel Atom E6xx series.
+          ML7213/ML7223 is completely compatible for Intel EG20T PCH.
 
 comment "External I2C/SMBus adapter drivers"
 
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 878a12026af2..8abfa4a03ce1 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -182,10 +182,12 @@ static DEFINE_MUTEX(pch_mutex);
 /* Definition for ML7213 by OKI SEMICONDUCTOR */
 #define PCI_VENDOR_ID_ROHM              0x10DB
 #define PCI_DEVICE_ID_ML7213_I2C        0x802D
+#define PCI_DEVICE_ID_ML7223_I2C        0x8010
 
 static struct pci_device_id __devinitdata pch_pcidev_id[] = {
         { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C),   1, },
         { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
+        { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
         {0,}
 };
 
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index d9aa9a649e35..a651779d9ff7 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -219,7 +219,7 @@ static void __exit i2c_gpio_exit(void)
 }
 module_exit(i2c_gpio_exit);
 
-MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
 MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:i2c-gpio");
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 455e909bc768..ab26840d0c70 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -50,6 +50,7 @@
   Patsburg (PCH) IDF    0x1d71     32     hard     yes     yes     yes
   Patsburg (PCH) IDF    0x1d72     32     hard     yes     yes     yes
   DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
+  Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -141,6 +142,7 @@
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS  0x1e22
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS      0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
 
@@ -158,6 +160,8 @@ static struct pci_driver i801_driver;
 #define FEATURE_BLOCK_BUFFER    (1 << 1)
 #define FEATURE_BLOCK_PROC      (1 << 2)
 #define FEATURE_I2C_BLOCK_READ  (1 << 3)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF             (1 << 15)
 
 static const char *i801_feature_names[] = {
         "SMBus PEC",
@@ -628,12 +632,13 @@ static const struct pci_device_id i801_ids[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
         { 0, }
 };
 
 MODULE_DEVICE_TABLE(pci, i801_ids);
 
-#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
+#if defined CONFIG_X86 && defined CONFIG_DMI
 static unsigned char apanel_addr;
 
 /* Scan the system ROM for the signature "FJKEYINF" */
@@ -663,11 +668,7 @@ static void __init input_apanel_init(void)
         }
         iounmap(bios);
 }
-#else
-static void __init input_apanel_init(void) {}
-#endif
 
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
 struct dmi_onboard_device_info {
         const char *name;
         u8 type;
@@ -733,7 +734,30 @@ static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
                 dmi_check_onboard_device(type, name, adap);
         }
 }
-#endif
+
+/* Register optional slaves */
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv)
+{
+        /* Only register slaves on main SMBus channel */
+        if (priv->features & FEATURE_IDF)
+                return;
+
+        if (apanel_addr) {
+                struct i2c_board_info info;
+
+                memset(&info, 0, sizeof(struct i2c_board_info));
+                info.addr = apanel_addr;
+                strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+                i2c_new_device(&priv->adapter, &info);
+        }
+
+        if (dmi_name_in_vendors("FUJITSU"))
+                dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif  /* CONFIG_X86 && CONFIG_DMI */
 
 static int __devinit i801_probe(struct pci_dev *dev,
                                 const struct pci_device_id *id)
@@ -753,6 +777,11 @@ static int __devinit i801_probe(struct pci_dev *dev,
 
         priv->pci_dev = dev;
         switch (dev->device) {
+        case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
+        case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
+        case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+                priv->features |= FEATURE_IDF;
+                /* fall through */
         default:
                 priv->features |= FEATURE_I2C_BLOCK_READ;
                 /* fall through */
@@ -838,21 +867,7 @@ static int __devinit i801_probe(struct pci_dev *dev,
                 goto exit_release;
         }
 
-        /* Register optional slaves */
-#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
-        if (apanel_addr) {
-                struct i2c_board_info info;
-
-                memset(&info, 0, sizeof(struct i2c_board_info));
-                info.addr = apanel_addr;
-                strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
-                i2c_new_device(&priv->adapter, &info);
-        }
-#endif
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
-        if (dmi_name_in_vendors("FUJITSU"))
-                dmi_walk(dmi_check_onboard_devices, &priv->adapter);
-#endif
+        i801_probe_optional_slaves(priv);
 
         pci_set_drvdata(dev, priv);
         return 0;
@@ -912,7 +927,8 @@ static struct pci_driver i801_driver = {
 
 static int __init i2c_i801_init(void)
 {
-        input_apanel_init();
+        if (dmi_name_in_vendors("FUJITSU"))
+                input_apanel_init();
         return pci_register_driver(&i801_driver);
 }
 
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 75b984c519ac..107397a606b4 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -560,15 +560,18 @@ static struct i2c_adapter mpc_ops = {
         .timeout = HZ,
 };
 
+static const struct of_device_id mpc_i2c_of_match[];
 static int __devinit fsl_i2c_probe(struct platform_device *op)
 {
+        const struct of_device_id *match;
         struct mpc_i2c *i2c;
         const u32 *prop;
         u32 clock = MPC_I2C_CLOCK_LEGACY;
         int result = 0;
         int plen;
 
-        if (!op->dev.of_match)
+        match = of_match_device(mpc_i2c_of_match, &op->dev);
+        if (!match)
                 return -EINVAL;
 
         i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
@@ -605,8 +608,8 @@ static int __devinit fsl_i2c_probe(struct platform_device *op)
                         clock = *prop;
         }
 
-        if (op->dev.of_match->data) {
-                struct mpc_i2c_data *data = op->dev.of_match->data;
+        if (match->data) {
+                struct mpc_i2c_data *data = match->data;
                 data->setup(op->dev.of_node, i2c, clock, data->prescaler);
         } else {
                 /* Backwards compatibility */
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index e10e5cf3751a..0c731ca69f15 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -15,13 +15,14 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
 
 #include <plat/i2c.h>
 
@@ -103,9 +104,6 @@
 /* maximum threshold value */
 #define MAX_I2C_FIFO_THRESHOLD  15
 
-/* per-transfer delay, required for the hardware to stabilize */
-#define I2C_DELAY               150
-
 enum i2c_status {
         I2C_NOP,
         I2C_ON_GOING,
@@ -120,9 +118,6 @@ enum i2c_operation {
         I2C_READ = 0x01
 };
 
-/* controller response timeout in ms */
-#define I2C_TIMEOUT_MS  2000
-
 /**
  * struct i2c_nmk_client - client specific data
  * @slave_adr: 7-bit slave address
@@ -151,6 +146,7 @@ struct i2c_nmk_client {
  * @stop: stop condition
  * @xfer_complete: acknowledge completion for a I2C message
  * @result: controller propogated result
+ * @busy: Busy doing transfer
  */
 struct nmk_i2c_dev {
         struct platform_device          *pdev;
@@ -163,6 +159,8 @@ struct nmk_i2c_dev {
         int                             stop;
         struct completion               xfer_complete;
         int                             result;
+        struct regulator                *regulator;
+        bool                            busy;
 };
 
 /* controller's abort causes */
@@ -209,7 +207,7 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
         writel((I2C_CR_FTX | I2C_CR_FRX), dev->virtbase + I2C_CR);
 
         for (i = 0; i < LOOP_ATTEMPTS; i++) {
-                timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT_MS);
+                timeout = jiffies + dev->adap.timeout;
 
                 while (!time_after(jiffies, timeout)) {
                         if ((readl(dev->virtbase + I2C_CR) &
@@ -253,11 +251,9 @@ static int init_hw(struct nmk_i2c_dev *dev)
 {
         int stat;
 
-        clk_enable(dev->clk);
-
         stat = flush_i2c_fifo(dev);
         if (stat)
-                return stat;
+                goto exit;
 
         /* disable the controller */
         i2c_clr_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
@@ -268,10 +264,8 @@ static int init_hw(struct nmk_i2c_dev *dev)
 
         dev->cli.operation = I2C_NO_OPERATION;
 
-        clk_disable(dev->clk);
-
-        udelay(I2C_DELAY);
-        return 0;
+exit:
+        return stat;
 }
 
 /* enable peripheral, master mode operation */
@@ -424,7 +418,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
                         dev->virtbase + I2C_IMSCR);
 
         timeout = wait_for_completion_interruptible_timeout(
-                &dev->xfer_complete, msecs_to_jiffies(I2C_TIMEOUT_MS));
+                &dev->xfer_complete, dev->adap.timeout);
 
         if (timeout < 0) {
                 dev_err(&dev->pdev->dev,
@@ -434,14 +428,32 @@ static int read_i2c(struct nmk_i2c_dev *dev)
         }
 
         if (timeout == 0) {
-                /* controller has timedout, re-init the h/w */
-                dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
-                (void) init_hw(dev);
+                /* Controller timed out */
+                dev_err(&dev->pdev->dev, "read from slave 0x%x timed out\n",
+                                dev->cli.slave_adr);
                 status = -ETIMEDOUT;
         }
         return status;
 }
 
+static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes)
+{
+        int count;
+
+        for (count = (no_bytes - 2);
+                        (count > 0) &&
+                        (dev->cli.count != 0);
+                        count--) {
+                /* write to the Tx FIFO */
+                writeb(*dev->cli.buffer,
+                        dev->virtbase + I2C_TFR);
+                dev->cli.buffer++;
+                dev->cli.count--;
+                dev->cli.xfer_bytes++;
+        }
+
+}
+
 /**
  * write_i2c() - Write data to I2C client.
  * @dev: private data of I2C Driver
@@ -469,8 +481,13 @@ static int write_i2c(struct nmk_i2c_dev *dev)
         init_completion(&dev->xfer_complete);
 
         /* enable interrupts by settings the masks */
-        irq_mask = (I2C_IT_TXFNE | I2C_IT_TXFOVR |
-                        I2C_IT_MAL | I2C_IT_BERR);
+        irq_mask = (I2C_IT_TXFOVR | I2C_IT_MAL | I2C_IT_BERR);
+
+        /* Fill the TX FIFO with transmit data */
+        fill_tx_fifo(dev, MAX_I2C_FIFO_THRESHOLD);
+
+        if (dev->cli.count != 0)
+                irq_mask |= I2C_IT_TXFNE;
 
         /*
          * check if we want to transfer a single or multiple bytes, if so
@@ -488,7 +505,7 @@ static int write_i2c(struct nmk_i2c_dev *dev)
                         dev->virtbase + I2C_IMSCR);
 
         timeout = wait_for_completion_interruptible_timeout(
-                &dev->xfer_complete, msecs_to_jiffies(I2C_TIMEOUT_MS));
+                &dev->xfer_complete, dev->adap.timeout);
 
         if (timeout < 0) {
                 dev_err(&dev->pdev->dev,
@@ -498,9 +515,9 @@ static int write_i2c(struct nmk_i2c_dev *dev)
         }
 
         if (timeout == 0) {
-                /* controller has timedout, re-init the h/w */
-                dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
-                (void) init_hw(dev);
+                /* Controller timed out */
+                dev_err(&dev->pdev->dev, "write to slave 0x%x timed out\n",
+                                dev->cli.slave_adr);
                 status = -ETIMEDOUT;
         }
 
@@ -508,6 +525,51 @@ static int write_i2c(struct nmk_i2c_dev *dev)
 }
 
 /**
+ * nmk_i2c_xfer_one() - transmit a single I2C message
+ * @dev: device with a message encoded into it
+ * @flags: message flags
+ */
+static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
+{
+        int status;
+
+        if (flags & I2C_M_RD) {
+                /* read operation */
+                dev->cli.operation = I2C_READ;
+                status = read_i2c(dev);
+        } else {
+                /* write operation */
+                dev->cli.operation = I2C_WRITE;
+                status = write_i2c(dev);
+        }
+
+        if (status || (dev->result)) {
+                u32 i2c_sr;
+                u32 cause;
+
+                i2c_sr = readl(dev->virtbase + I2C_SR);
+                /*
+                 * Check if the controller I2C operation status
+                 * is set to ABORT(11b).
+                 */
+                if (((i2c_sr >> 2) & 0x3) == 0x3) {
+                        /* get the abort cause */
+                        cause = (i2c_sr >> 4) & 0x7;
+                        dev_err(&dev->pdev->dev, "%s\n", cause
+                                >= ARRAY_SIZE(abort_causes) ?
+                                "unknown reason" :
+                                abort_causes[cause]);
+                }
+
+                (void) init_hw(dev);
+
+                status = status ? status : dev->result;
+        }
+
+        return status;
+}
+
+/**
  * nmk_i2c_xfer() - I2C transfer function used by kernel framework
  * @i2c_adap: Adapter pointer to the controller
  * @msgs: Pointer to data to be written.
@@ -559,53 +621,55 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 {
         int status;
         int i;
-        u32 cause;
         struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
+        int j;
+
+        dev->busy = true;
+
+        if (dev->regulator)
+                regulator_enable(dev->regulator);
+        pm_runtime_get_sync(&dev->pdev->dev);
+
+        clk_enable(dev->clk);
 
         status = init_hw(dev);
         if (status)
-                return status;
+                goto out;
 
-        clk_enable(dev->clk);
+        /* Attempt three times to send the message queue */
+        for (j = 0; j < 3; j++) {
+                /* setup the i2c controller */
+                setup_i2c_controller(dev);
 
-        /* setup the i2c controller */
-        setup_i2c_controller(dev);
+                for (i = 0; i < num_msgs; i++) {
+                        if (unlikely(msgs[i].flags & I2C_M_TEN)) {
+                                dev_err(&dev->pdev->dev, "10 bit addressing"
+                                                "not supported\n");
 
-        for (i = 0; i < num_msgs; i++) {
-                if (unlikely(msgs[i].flags & I2C_M_TEN)) {
-                        dev_err(&dev->pdev->dev, "10 bit addressing"
-                                        "not supported\n");
-                        return -EINVAL;
-                }
-                dev->cli.slave_adr      = msgs[i].addr;
-                dev->cli.buffer         = msgs[i].buf;
-                dev->cli.count          = msgs[i].len;
-                dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
-                dev->result = 0;
-
-                if (msgs[i].flags & I2C_M_RD) {
-                        /* it is a read operation */
-                        dev->cli.operation = I2C_READ;
-                        status = read_i2c(dev);
-                } else {
-                        /* write operation */
-                        dev->cli.operation = I2C_WRITE;
-                        status = write_i2c(dev);
-                }
-                if (status || (dev->result)) {
-                        /* get the abort cause */
-                        cause = (readl(dev->virtbase + I2C_SR) >> 4) & 0x7;
-                        dev_err(&dev->pdev->dev, "error during I2C"
-                                        "message xfer: %d\n", cause);
-                        dev_err(&dev->pdev->dev, "%s\n",
-                                cause >= ARRAY_SIZE(abort_causes)
-                                ? "unknown reason" : abort_causes[cause]);
-                        clk_disable(dev->clk);
-                        return status;
+                                status = -EINVAL;
+                                goto out;
+                        }
+                        dev->cli.slave_adr      = msgs[i].addr;
+                        dev->cli.buffer         = msgs[i].buf;
+                        dev->cli.count          = msgs[i].len;
+                        dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
+                        dev->result = 0;
+
+                        status = nmk_i2c_xfer_one(dev, msgs[i].flags);
+                        if (status != 0)
+                                break;
                 }
-                udelay(I2C_DELAY);
+                if (status == 0)
+                        break;
         }
+
+out:
         clk_disable(dev->clk);
+        pm_runtime_put_sync(&dev->pdev->dev);
+        if (dev->regulator)
+                regulator_disable(dev->regulator);
+
+        dev->busy = false;
 
         /* return the no. messages processed */
         if (status)
@@ -666,17 +730,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
                          */
                         disable_interrupts(dev, I2C_IT_TXFNE);
                 } else {
-                        for (count = (MAX_I2C_FIFO_THRESHOLD - tft - 2);
-                                        (count > 0) &&
-                                        (dev->cli.count != 0);
-                                        count--) {
-                                /* write to the Tx FIFO */
-                                writeb(*dev->cli.buffer,
-                                        dev->virtbase + I2C_TFR);
-                                dev->cli.buffer++;
-                                dev->cli.count--;
-                                dev->cli.xfer_bytes++;
-                        }
+                        fill_tx_fifo(dev, (MAX_I2C_FIFO_THRESHOLD - tft));
                         /*
                          * if done, close the transfer by disabling the
                          * corresponding TXFNE interrupt
@@ -729,16 +783,11 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
                         }
                 }
 
-                i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTD);
-                i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTDWS);
-
-                disable_interrupts(dev,
-                                (I2C_IT_TXFNE | I2C_IT_TXFE | I2C_IT_TXFF
-                                        | I2C_IT_TXFOVR | I2C_IT_RXFNF
-                                        | I2C_IT_RXFF | I2C_IT_RXFE));
+                disable_all_interrupts(dev);
+                clear_all_interrupts(dev);
 
                 if (dev->cli.count) {
-                        dev->result = -1;
+                        dev->result = -EIO;
                         dev_err(&dev->pdev->dev, "%lu bytes still remain to be"
                                         "xfered\n", dev->cli.count);
                         (void) init_hw(dev);
@@ -749,7 +798,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 
         /* Master Arbitration lost interrupt */
         case I2C_IT_MAL:
-                dev->result = -1;
+                dev->result = -EIO;
                 (void) init_hw(dev);
 
                 i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MAL);
@@ -763,7 +812,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
          * during the transaction.
          */
         case I2C_IT_BERR:
-                dev->result = -1;
+                dev->result = -EIO;
                 /* get the status */
                 if (((readl(dev->virtbase + I2C_SR) >> 2) & 0x3) == I2C_ABORT)
                         (void) init_hw(dev);
@@ -779,7 +828,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
          * the Tx FIFO is full.
          */
         case I2C_IT_TXFOVR:
-                dev->result = -1;
+                dev->result = -EIO;
                 (void) init_hw(dev);
 
                 dev_err(&dev->pdev->dev, "Tx Fifo Over run\n");
@@ -805,6 +854,38 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
         return IRQ_HANDLED;
 }
 
+
+#ifdef CONFIG_PM
+static int nmk_i2c_suspend(struct device *dev)
+{
+        struct platform_device *pdev = to_platform_device(dev);
+        struct nmk_i2c_dev *nmk_i2c = platform_get_drvdata(pdev);
+
+        if (nmk_i2c->busy)
+                return -EBUSY;
+
+        return 0;
+}
+
+static int nmk_i2c_resume(struct device *dev)
+{
+        return 0;
+}
+#else
+#define nmk_i2c_suspend NULL
+#define nmk_i2c_resume  NULL
+#endif
+
+/*
+ * We use noirq so that we suspend late and resume before the wakeup interrupt
+ * to ensure that we do the !pm_runtime_suspended() check in resume before
+ * there has been a regular pm runtime resume (via pm_runtime_get_sync()).
+ */
+static const struct dev_pm_ops nmk_i2c_pm = {
+        .suspend_noirq  = nmk_i2c_suspend,
+        .resume_noirq   = nmk_i2c_resume,
+};
+
 static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
 {
         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -830,7 +911,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
                 ret = -ENOMEM;
                 goto err_no_mem;
         }
-
+        dev->busy = false;
         dev->pdev = pdev;
         platform_set_drvdata(pdev, dev);
 
@@ -860,6 +941,15 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
                 goto err_irq;
         }
 
+        dev->regulator = regulator_get(&pdev->dev, "v-i2c");
+        if (IS_ERR(dev->regulator)) {
+                dev_warn(&pdev->dev, "could not get i2c regulator\n");
+                dev->regulator = NULL;
+        }
+
+        pm_suspend_ignore_children(&pdev->dev, true);
+        pm_runtime_enable(&pdev->dev);
+
         dev->clk = clk_get(&pdev->dev, NULL);
         if (IS_ERR(dev->clk)) {
                 dev_err(&pdev->dev, "could not get i2c clock\n");
@@ -872,6 +962,8 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
         adap->owner     = THIS_MODULE;
         adap->class     = I2C_CLASS_HWMON | I2C_CLASS_SPD;
         adap->algo      = &nmk_i2c_algo;
+        adap->timeout   = pdata->timeout ? msecs_to_jiffies(pdata->timeout) :
+                msecs_to_jiffies(20000);
         snprintf(adap->name, sizeof(adap->name),
                  "Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start);
 
@@ -887,12 +979,6 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
 
         i2c_set_adapdata(adap, dev);
 
-        ret = init_hw(dev);
-        if (ret != 0) {
-                dev_err(&pdev->dev, "error in initializing i2c hardware\n");
-                goto err_init_hw;
-        }
-
         dev_info(&pdev->dev, "initialize %s on virtual "
                 "base %p\n", adap->name, dev->virtbase);
 
@@ -904,10 +990,12 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
 
         return 0;
 
- err_init_hw:
  err_add_adap:
         clk_put(dev->clk);
  err_no_clk:
+        if (dev->regulator)
+                regulator_put(dev->regulator);
+        pm_runtime_disable(&pdev->dev);
         free_irq(dev->irq, dev);
  err_irq:
         iounmap(dev->virtbase);
@@ -938,6 +1026,9 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
         if (res)
                 release_mem_region(res->start, resource_size(res));
         clk_put(dev->clk);
+        if (dev->regulator)
+                regulator_put(dev->regulator);
+        pm_runtime_disable(&pdev->dev);
         platform_set_drvdata(pdev, NULL);
         kfree(dev);
 
@@ -948,6 +1039,7 @@ static struct platform_driver nmk_i2c_driver = {
         .driver = {
                 .owner = THIS_MODULE,
                 .name = DRIVER_NAME,
+                .pm = &nmk_i2c_pm,
         },
         .probe = nmk_i2c_probe,
         .remove = __devexit_p(nmk_i2c_remove),
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index fee1a2613861..1b46a9d9f907 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -49,7 +49,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/core.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
@@ -306,7 +305,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
                 return -EIO;
         }
 
-        pdata = mfd_get_data(pdev);
+        pdata = pdev->dev.platform_data;
         if (pdata) {
                 i2c->regstep = pdata->regstep;
                 i2c->clock_khz = pdata->clock_khz;
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index fc5fbd1012c9..4b95f7a63a3b 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -2,13 +2,13 @@
  * i2c-parport-light.c I2C bus over parallel port                           *
  * ------------------------------------------------------------------------ *
    Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
-   
+
    Based on older i2c-velleman.c driver
    Copyright (C) 1995-2000 Simon G. Vogl
    With some changes from:
    Frodo Looijaard <frodol@dds.nl>
    Kyösti Mälkki <kmalkki@cc.hut.fi>
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
@@ -114,7 +114,7 @@ static struct i2c_algo_bit_data parport_algo_data = {
         .getscl         = parport_getscl,
         .udelay         = 50,
         .timeout        = HZ,
-}; 
+};
 
 /* ----- Driver registration ---------------------------------------------- */
 
@@ -132,7 +132,7 @@ static struct i2c_smbus_alert_setup alert_data = {
 static struct i2c_client *ara;
 static struct lineop parport_ctrl_irq = {
         .val            = (1 << 4),
-        .port           = CTRL,
+        .port           = PORT_CTRL,
 };
 
 static int __devinit i2c_parport_probe(struct platform_device *pdev)
@@ -245,7 +245,7 @@ static int __init i2c_parport_init(void)
         if (irq != 0)
                 pr_info(DRVNAME ": using irq %d\n", irq);
 
-        if (!adapter_parm[type].getscl.val)
+        if (!adapter_parm[type].getscl.val)
                 parport_algo_data.getscl = NULL;
 
         /* Sets global pdev as a side effect */
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 2dbba163b102..24565687ac9b 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -2,13 +2,13 @@
  * i2c-parport.c I2C bus over parallel port                                 *
  * ------------------------------------------------------------------------ *
    Copyright (C) 2003-2011 Jean Delvare <khali@linux-fr.org>
-   
+
    Based on older i2c-philips-par.c driver
    Copyright (C) 1995-2000 Simon G. Vogl
    With some changes from:
    Frodo Looijaard <frodol@dds.nl>
    Kyösti Mälkki <kmalkki@cc.hut.fi>
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
@@ -78,13 +78,13 @@ static unsigned char port_read_control(struct parport *p)
         return parport_read_control(p);
 }
 
-static void (*port_write[])(struct parport *, unsigned char) = {
+static void (* const port_write[])(struct parport *, unsigned char) = {
         port_write_data,
         NULL,
         port_write_control,
 };
 
-static unsigned char (*port_read[])(struct parport *) = {
+static unsigned char (* const port_read[])(struct parport *) = {
         port_read_data,
         port_read_status,
         port_read_control,
@@ -147,7 +147,7 @@ static const struct i2c_algo_bit_data parport_algo_data = {
         .getscl         = parport_getscl,
         .udelay         = 10, /* ~50 kbps */
         .timeout        = HZ,
-}; 
+};
 
 /* ----- I2c and parallel port call-back functions and structures --------- */
 
@@ -164,10 +164,10 @@ void i2c_parport_irq(void *data)
                         "SMBus alert received but no ARA client!\n");
 }
 
-static void i2c_parport_attach (struct parport *port)
+static void i2c_parport_attach(struct parport *port)
 {
         struct i2c_par *adapter;
-        
+
         adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
         if (adapter == NULL) {
                 printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
@@ -180,7 +180,7 @@ static void i2c_parport_attach (struct parport *port)
                 NULL, NULL, i2c_parport_irq, PARPORT_FLAG_EXCL, adapter);
         if (!adapter->pdev) {
                 printk(KERN_ERR "i2c-parport: Unable to register with parport\n");
-                goto ERROR0;
+                goto err_free;
         }
 
         /* Fill the rest of the structure */
@@ -200,7 +200,7 @@ static void i2c_parport_attach (struct parport *port)
 
         if (parport_claim_or_block(adapter->pdev) < 0) {
                 printk(KERN_ERR "i2c-parport: Could not claim parallel port\n");
-                goto ERROR1;
+                goto err_unregister;
         }
 
         /* Reset hardware to a sane state (SCL and SDA high) */
@@ -215,7 +215,7 @@ static void i2c_parport_attach (struct parport *port)
 
         if (i2c_bit_add_bus(&adapter->adapter) < 0) {
                 printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
-                goto ERROR1;
+                goto err_unregister;
         }
 
         /* Setup SMBus alert if supported */
@@ -234,16 +234,16 @@ static void i2c_parport_attach (struct parport *port)
         mutex_lock(&adapter_list_lock);
         list_add_tail(&adapter->node, &adapter_list);
         mutex_unlock(&adapter_list_lock);
-        return;
+        return;
 
-ERROR1:
+ err_unregister:
         parport_release(adapter->pdev);
         parport_unregister_device(adapter->pdev);
-ERROR0:
+ err_free:
         kfree(adapter);
 }
 
-static void i2c_parport_detach (struct parport *port)
+static void i2c_parport_detach(struct parport *port)
 {
         struct i2c_par *adapter, *_n;
 
@@ -260,7 +260,7 @@ static void i2c_parport_detach (struct parport *port)
                         /* Un-init if needed (power off...) */
                         if (adapter_parm[type].init.val)
                                 line_set(port, 0, &adapter_parm[type].init);
-                                
+
                         parport_release(adapter->pdev);
                         parport_unregister_device(adapter->pdev);
                         list_del(&adapter->node);
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
index a9f66816546c..3fe652302ea7 100644
--- a/drivers/i2c/busses/i2c-parport.h
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -2,7 +2,7 @@
  * i2c-parport.h I2C bus over parallel port                                 *
  * ------------------------------------------------------------------------ *
    Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
-   
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
@@ -18,13 +18,9 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  * ------------------------------------------------------------------------ */
 
-#ifdef DATA
-#undef DATA
-#endif
-
-#define DATA    0
-#define STAT    1
-#define CTRL    2
+#define PORT_DATA       0
+#define PORT_STAT       1
+#define PORT_CTRL       2
 
 struct lineop {
         u8 val;
@@ -41,61 +37,61 @@ struct adapter_parm {
         unsigned int smbus_alert:1;
 };
 
-static struct adapter_parm adapter_parm[] = {
+static const struct adapter_parm adapter_parm[] = {
         /* type 0: Philips adapter */
         {
-                .setsda = { 0x80, DATA, 1 },
-                .setscl = { 0x08, CTRL, 0 },
-                .getsda = { 0x80, STAT, 0 },
-                .getscl = { 0x08, STAT, 0 },
+                .setsda = { 0x80, PORT_DATA, 1 },
+                .setscl = { 0x08, PORT_CTRL, 0 },
+                .getsda = { 0x80, PORT_STAT, 0 },
+                .getscl = { 0x08, PORT_STAT, 0 },
         },
         /* type 1: home brew teletext adapter */
         {
-                .setsda = { 0x02, DATA, 0 },
-                .setscl = { 0x01, DATA, 0 },
-                .getsda = { 0x80, STAT, 1 },
+                .setsda = { 0x02, PORT_DATA, 0 },
+                .setscl = { 0x01, PORT_DATA, 0 },
+                .getsda = { 0x80, PORT_STAT, 1 },
         },
         /* type 2: Velleman K8000 adapter */
         {
-                .setsda = { 0x02, CTRL, 1 },
-                .setscl = { 0x08, CTRL, 1 },
-                .getsda = { 0x10, STAT, 0 },
+                .setsda = { 0x02, PORT_CTRL, 1 },
+                .setscl = { 0x08, PORT_CTRL, 1 },
+                .getsda = { 0x10, PORT_STAT, 0 },
         },
         /* type 3: ELV adapter */
         {
-                .setsda = { 0x02, DATA, 1 },
-                .setscl = { 0x01, DATA, 1 },
-                .getsda = { 0x40, STAT, 1 },
-                .getscl = { 0x08, STAT, 1 },
+                .setsda = { 0x02, PORT_DATA, 1 },
+                .setscl = { 0x01, PORT_DATA, 1 },
+                .getsda = { 0x40, PORT_STAT, 1 },
+                .getscl = { 0x08, PORT_STAT, 1 },
         },
         /* type 4: ADM1032 evaluation board */
         {
-                .setsda = { 0x02, DATA, 1 },
-                .setscl = { 0x01, DATA, 1 },
-                .getsda = { 0x10, STAT, 1 },
-                .init   = { 0xf0, DATA, 0 },
+                .setsda = { 0x02, PORT_DATA, 1 },
+                .setscl = { 0x01, PORT_DATA, 1 },
+                .getsda = { 0x10, PORT_STAT, 1 },
+                .init   = { 0xf0, PORT_DATA, 0 },
                 .smbus_alert = 1,
         },
         /* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
         {
-                .setsda = { 0x02, DATA, 1 },
-                .setscl = { 0x01, DATA, 1 },
-                .getsda = { 0x10, STAT, 1 },
+                .setsda = { 0x02, PORT_DATA, 1 },
+                .setscl = { 0x01, PORT_DATA, 1 },
+                .getsda = { 0x10, PORT_STAT, 1 },
         },
         /* type 6: Barco LPT->DVI (K5800236) adapter */
         {
-                .setsda = { 0x02, DATA, 1 },
-                .setscl = { 0x01, DATA, 1 },
-                .getsda = { 0x20, STAT, 0 },
-                .getscl = { 0x40, STAT, 0 },
-                .init   = { 0xfc, DATA, 0 },
+                .setsda = { 0x02, PORT_DATA, 1 },
+                .setscl = { 0x01, PORT_DATA, 1 },
+                .getsda = { 0x20, PORT_STAT, 0 },
+                .getscl = { 0x40, PORT_STAT, 0 },
+                .init   = { 0xfc, PORT_DATA, 0 },
         },
         /* type 7: One For All JP1 parallel port adapter */
         {
-                .setsda = { 0x01, DATA, 0 },
-                .setscl = { 0x02, DATA, 0 },
-                .getsda = { 0x80, STAT, 1 },
-                .init   = { 0x04, DATA, 1 },
+                .setsda = { 0x01, PORT_DATA, 0 },
+                .setscl = { 0x02, PORT_DATA, 0 },
+                .getsda = { 0x80, PORT_STAT, 1 },
+                .init   = { 0x04, PORT_DATA, 1 },
         },
 };
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index a97e3fec8148..04be9f82e14b 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -65,7 +65,7 @@ static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
                 jiffies, expires);
 
         timer->expires = jiffies + expires;
-        timer->data = (unsigned long)&alg_data;
+        timer->data = (unsigned long)alg_data;
 
         add_timer(timer);
 }
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 2707f5e17158..f633a53b6dbe 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -32,6 +32,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/i2c/i2c-sh_mobile.h>
 
 /* Transmit operation:                                                      */
 /*                                                                          */
@@ -117,7 +118,7 @@ struct sh_mobile_i2c_data {
         struct device *dev;
         void __iomem *reg;
         struct i2c_adapter adap;
-
+        unsigned long bus_speed;
         struct clk *clk;
         u_int8_t icic;
         u_int8_t iccl;
@@ -205,7 +206,7 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
          * We also round off the result.
          */
         num = i2c_clk * 5;
-        denom = NORMAL_SPEED * 9;
+        denom = pd->bus_speed * 9;
         tmp = num * 10 / denom;
         if (tmp % 10 >= 5)
                 pd->iccl = (u_int8_t)((num/denom) + 1);
@@ -574,10 +575,10 @@ static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
 
 static int sh_mobile_i2c_probe(struct platform_device *dev)
 {
+        struct i2c_sh_mobile_platform_data *pdata = dev->dev.platform_data;
         struct sh_mobile_i2c_data *pd;
         struct i2c_adapter *adap;
         struct resource *res;
-        char clk_name[8];
         int size;
         int ret;
 
@@ -587,10 +588,9 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
                 return -ENOMEM;
         }
 
-        snprintf(clk_name, sizeof(clk_name), "i2c%d", dev->id);
-        pd->clk = clk_get(&dev->dev, clk_name);
+        pd->clk = clk_get(&dev->dev, NULL);
         if (IS_ERR(pd->clk)) {
-                dev_err(&dev->dev, "cannot get clock \"%s\"\n", clk_name);
+                dev_err(&dev->dev, "cannot get clock\n");
                 ret = PTR_ERR(pd->clk);
                 goto err;
         }
@@ -620,6 +620,11 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
                 goto err_irq;
         }
 
+        /* Use platformd data bus speed or NORMAL_SPEED */
+        pd->bus_speed = NORMAL_SPEED;
+        if (pdata && pdata->bus_speed)
+                pd->bus_speed = pdata->bus_speed;
+
         /* The IIC blocks on SH-Mobile ARM processors
          * come with two new bits in ICIC.
          */
@@ -660,6 +665,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
                 goto err_all;
         }
 
+        dev_info(&dev->dev, "I2C adapter %d with bus speed %lu Hz\n",
+                 adap->nr, pd->bus_speed);
         return 0;
 
  err_all:
@@ -729,3 +736,4 @@ module_exit(sh_mobile_i2c_adap_exit);
 MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
 MODULE_AUTHOR("Magnus Damm");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-sh_mobile");
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index b4ab39b741eb..4d9319665e32 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -35,8 +35,10 @@
 #define BYTES_PER_FIFO_WORD 4
 
 #define I2C_CNFG                                0x000
+#define I2C_CNFG_DEBOUNCE_CNT_SHIFT             12
 #define I2C_CNFG_PACKET_MODE_EN                 (1<<10)
 #define I2C_CNFG_NEW_MASTER_FSM                 (1<<11)
+#define I2C_STATUS                              0x01C
 #define I2C_SL_CNFG                             0x020
 #define I2C_SL_CNFG_NEWSL                       (1<<2)
 #define I2C_SL_ADDR1                            0x02c
@@ -77,6 +79,7 @@
 #define I2C_ERR_NONE                            0x00
 #define I2C_ERR_NO_ACK                          0x01
 #define I2C_ERR_ARBITRATION_LOST                0x02
+#define I2C_ERR_UNKNOWN_INTERRUPT               0x04
 
 #define PACKET_HEADER0_HEADER_SIZE_SHIFT        28
 #define PACKET_HEADER0_PACKET_ID_SHIFT          16
@@ -121,6 +124,7 @@ struct tegra_i2c_dev {
         void __iomem *base;
         int cont_id;
         int irq;
+        bool irq_disabled;
         int is_dvc;
         struct completion msg_complete;
         int msg_err;
@@ -325,11 +329,17 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
         if (i2c_dev->is_dvc)
                 tegra_dvc_init(i2c_dev);
 
-        val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN;
+        val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN |
+                (0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
         i2c_writel(i2c_dev, val, I2C_CNFG);
         i2c_writel(i2c_dev, 0, I2C_INT_MASK);
         clk_set_rate(i2c_dev->clk, i2c_dev->bus_clk_rate * 8);
 
+        if (!i2c_dev->is_dvc) {
+                u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
+                i2c_writel(i2c_dev, sl_cfg | I2C_SL_CNFG_NEWSL, I2C_SL_CNFG);
+        }
+
         val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
                 0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
         i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
@@ -338,6 +348,12 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
                 err = -ETIMEDOUT;
 
         clk_disable(i2c_dev->clk);
+
+        if (i2c_dev->irq_disabled) {
+                i2c_dev->irq_disabled = 0;
+                enable_irq(i2c_dev->irq);
+        }
+
         return err;
 }
 
@@ -350,8 +366,19 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
         status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
         if (status == 0) {
-                dev_warn(i2c_dev->dev, "interrupt with no status\n");
-                return IRQ_NONE;
+                dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
+                         i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
+                         i2c_readl(i2c_dev, I2C_STATUS),
+                         i2c_readl(i2c_dev, I2C_CNFG));
+                i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT;
+
+                if (!i2c_dev->irq_disabled) {
+                        disable_irq_nosync(i2c_dev->irq);
+                        i2c_dev->irq_disabled = 1;
+                }
+
+                complete(&i2c_dev->msg_complete);
+                goto err;
         }
 
         if (unlikely(status & status_err)) {
@@ -391,6 +418,8 @@ err:
                 I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ |
                 I2C_INT_RX_FIFO_DATA_REQ);
         i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+        if (i2c_dev->is_dvc)
+                dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
         return IRQ_HANDLED;
 }
 
@@ -424,12 +453,12 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 
         packet_header = msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
         packet_header |= I2C_HEADER_IE_ENABLE;
+        if (!stop)
+                packet_header |= I2C_HEADER_REPEAT_START;
         if (msg->flags & I2C_M_TEN)
                 packet_header |= I2C_HEADER_10BIT_ADDR;
         if (msg->flags & I2C_M_IGNORE_NAK)
                 packet_header |= I2C_HEADER_CONT_ON_NAK;
-        if (msg->flags & I2C_M_NOSTART)
-                packet_header |= I2C_HEADER_REPEAT_START;
         if (msg->flags & I2C_M_RD)
                 packet_header |= I2C_HEADER_READ;
         i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index e9d5ff4d1496..4bb68f35caf2 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -34,7 +34,6 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/core.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
@@ -705,7 +704,7 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev)
         if (irq < 0)
                 goto resource_missing;
 
-        pdata = mfd_get_data(pdev);
+        pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data;
         if (!pdata)
                 return -EINVAL;