Merge branch 'linus' into core/futexes

29 files changed, 1046 insertions, 193 deletions

diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 1e328d19cd6d..3e01992230b8 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -135,7 +135,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) {
         *status = get_pcf(adap, 1);
 #ifndef STUB_I2C
         while (timeout-- && (*status & I2C_PCF_PIN)) {
-                adap->waitforpin();
+                adap->waitforpin(adap->data);
                 *status = get_pcf(adap, 1);
         }
         if (*status & I2C_PCF_LAB) {
@@ -208,7 +208,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
                 return -ENXIO;
         }
         
-        printk(KERN_DEBUG "i2c-algo-pcf.o: deteted and initialized PCF8584.\n");
+        printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
 
         return 0;
 }
@@ -331,13 +331,16 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
         int i;
         int ret=0, timeout, status;
     
+        if (adap->xfer_begin)
+                adap->xfer_begin(adap->data);
 
         /* Check for bus busy */
         timeout = wait_for_bb(adap);
         if (timeout) {
                 DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
                             "Timeout waiting for BB in pcf_xfer\n");)
-                return -EIO;
+                i = -EIO;
+                goto out;
         }
         
         for (i = 0;ret >= 0 && i < num; i++) {
@@ -359,12 +362,14 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
                 if (timeout) {
                         if (timeout == -EINTR) {
                                 /* arbitration lost */
-                                return (-EINTR);
+                                i = -EINTR;
+                                goto out;
                         }
                         i2c_stop(adap);
                         DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting "
                                     "for PIN(1) in pcf_xfer\n");)
-                        return (-EREMOTEIO);
+                        i = -EREMOTEIO;
+                        goto out;
                 }
     
 #ifndef STUB_I2C
@@ -372,7 +377,8 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
                 if (status & I2C_PCF_LRB) {
                         i2c_stop(adap);
                         DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");)
-                        return (-EREMOTEIO);
+                        i = -EREMOTEIO;
+                        goto out;
                 }
 #endif
     
@@ -404,6 +410,9 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
                 }
         }
 
+out:
+        if (adap->xfer_end)
+                adap->xfer_end(adap->data);
         return (i);
 }
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6ee997b2817c..7f95905bbb9d 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -55,7 +55,7 @@ config I2C_AMD756
 
 config I2C_AMD756_S4882
         tristate "SMBus multiplexing on the Tyan S4882"
-        depends on I2C_AMD756 && EXPERIMENTAL
+        depends on I2C_AMD756 && X86 && EXPERIMENTAL
         help
           Enabling this option will add specific SMBus support for the Tyan
           S4882 motherboard.  On this 4-CPU board, the SMBus is multiplexed
@@ -97,6 +97,7 @@ config I2C_I801
             ICH9
             Tolapai
             ICH10
+            PCH
 
           This driver can also be built as a module.  If so, the module
           will be called i2c-i801.
@@ -148,7 +149,7 @@ config I2C_NFORCE2
 
 config I2C_NFORCE2_S4985
         tristate "SMBus multiplexing on the Tyan S4985"
-        depends on I2C_NFORCE2 && EXPERIMENTAL
+        depends on I2C_NFORCE2 && X86 && EXPERIMENTAL
         help
           Enabling this option will add specific SMBus support for the Tyan
           S4985 motherboard.  On this 4-CPU board, the SMBus is multiplexed
@@ -209,7 +210,7 @@ config I2C_VIA
           will be called i2c-via.
 
 config I2C_VIAPRO
-        tristate "VIA VT82C596/82C686/82xx and CX700"
+        tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820"
         depends on PCI
         help
           If you say yes to this option, support will be included for the VIA
@@ -223,6 +224,8 @@ config I2C_VIAPRO
             VT8237R/A/S
             VT8251
             CX700
+            VX800
+            VX820
 
           This driver can also be built as a module.  If so, the module
           will be called i2c-viapro.
@@ -330,6 +333,18 @@ config I2C_GPIO
           This is a very simple bitbanging I2C driver utilizing the
           arch-neutral GPIO API to control the SCL and SDA lines.
 
+config I2C_HIGHLANDER
+        tristate "Highlander FPGA SMBus interface"
+        depends on SH_HIGHLANDER
+        help
+          If you say yes to this option, support will be included for
+          the SMBus interface located in the FPGA on various Highlander
+          boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL
+          FPGAs. This is wholly unrelated to the SoC I2C.
+
+          This driver can also be built as a module.  If so, the module
+          will be called i2c-highlander.
+
 config I2C_IBM_IIC
         tristate "IBM PPC 4xx on-chip I2C interface"
         depends on 4xx
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 97dbfa2107fe..0c2c4b26cdf1 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CPM)           += i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)       += i2c-davinci.o
 obj-$(CONFIG_I2C_GPIO)          += i2c-gpio.o
+obj-$(CONFIG_I2C_HIGHLANDER)    += i2c-highlander.o
 obj-$(CONFIG_I2C_IBM_IIC)       += i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IOP3XX)        += i2c-iop3xx.o
 obj-$(CONFIG_I2C_IXP2000)       += i2c-ixp2000.o
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 1ea39254dac6..424dad6f18d8 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -332,10 +332,6 @@ static int __devinit amd756_probe(struct pci_dev *pdev,
         int error;
         u8 temp;
         
-        /* driver_data might come from user-space, so check it */
-        if (id->driver_data >= ARRAY_SIZE(chipname))
-                return -EINVAL;
-
         if (amd756_ioport) {
                 dev_err(&pdev->dev, "Only one device supported "
                        "(you have a strange motherboard, btw)\n");
@@ -412,7 +408,6 @@ static struct pci_driver amd756_driver = {
         .id_table       = amd756_ids,
         .probe          = amd756_probe,
         .remove         = __devexit_p(amd756_remove),
-        .dynids.use_driver_data = 1,
 };
 
 static int __init amd756_init(void)
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 8164de1f4d72..228f75723063 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -423,7 +423,6 @@ static const struct i2c_adapter cpm_ops = {
         .owner          = THIS_MODULE,
         .name           = "i2c-cpm",
         .algo           = &cpm_i2c_algo,
-        .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 };
 
 static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 7f38c01fb3a0..0ed3ccb81b63 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -104,7 +104,8 @@ static int pcf_isa_getclock(void *data)
         return (clock);
 }
 
-static void pcf_isa_waitforpin(void) {
+static void pcf_isa_waitforpin(void *data)
+{
         DEFINE_WAIT(wait);
         int timeout = 2;
         unsigned long flags;
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
new file mode 100644
index 000000000000..f4d22ae9d294
--- /dev/null
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -0,0 +1,498 @@
+/*
+ * Renesas Solutions Highlander FPGA I2C/SMBus support.
+ *
+ * Supported devices: R0P7780LC0011RL, R0P7785LC0011RL
+ *
+ * Copyright (C) 2008  Paul Mundt
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ * Copyright (C) 2008  Atom Create Engineering Co., Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License version 2. See the file "COPYING" in the main directory
+ * of this archive for more details.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#define SMCR            0x00
+#define SMCR_START      (1 << 0)
+#define SMCR_IRIC       (1 << 1)
+#define SMCR_BBSY       (1 << 2)
+#define SMCR_ACKE       (1 << 3)
+#define SMCR_RST        (1 << 4)
+#define SMCR_IEIC       (1 << 6)
+
+#define SMSMADR         0x02
+
+#define SMMR            0x04
+#define SMMR_MODE0      (1 << 0)
+#define SMMR_MODE1      (1 << 1)
+#define SMMR_CAP        (1 << 3)
+#define SMMR_TMMD       (1 << 4)
+#define SMMR_SP         (1 << 7)
+
+#define SMSADR          0x06
+#define SMTRDR          0x46
+
+struct highlander_i2c_dev {
+        struct device           *dev;
+        void __iomem            *base;
+        struct i2c_adapter      adapter;
+        struct completion       cmd_complete;
+        unsigned long           last_read_time;
+        int                     irq;
+        u8                      *buf;
+        size_t                  buf_len;
+};
+
+static int iic_force_poll, iic_force_normal;
+static int iic_timeout = 1000, iic_read_delay;
+
+static inline void highlander_i2c_irq_enable(struct highlander_i2c_dev *dev)
+{
+        iowrite16(ioread16(dev->base + SMCR) | SMCR_IEIC, dev->base + SMCR);
+}
+
+static inline void highlander_i2c_irq_disable(struct highlander_i2c_dev *dev)
+{
+        iowrite16(ioread16(dev->base + SMCR) & ~SMCR_IEIC, dev->base + SMCR);
+}
+
+static inline void highlander_i2c_start(struct highlander_i2c_dev *dev)
+{
+        iowrite16(ioread16(dev->base + SMCR) | SMCR_START, dev->base + SMCR);
+}
+
+static inline void highlander_i2c_done(struct highlander_i2c_dev *dev)
+{
+        iowrite16(ioread16(dev->base + SMCR) | SMCR_IRIC, dev->base + SMCR);
+}
+
+static void highlander_i2c_setup(struct highlander_i2c_dev *dev)
+{
+        u16 smmr;
+
+        smmr = ioread16(dev->base + SMMR);
+        smmr |= SMMR_TMMD;
+
+        if (iic_force_normal)
+                smmr &= ~SMMR_SP;
+        else
+                smmr |= SMMR_SP;
+
+        iowrite16(smmr, dev->base + SMMR);
+}
+
+static void smbus_write_data(u8 *src, u16 *dst, int len)
+{
+        for (; len > 1; len -= 2) {
+                *dst++ = be16_to_cpup((u16 *)src);
+                src += 2;
+        }
+
+        if (len)
+                *dst = *src << 8;
+}
+
+static void smbus_read_data(u16 *src, u8 *dst, int len)
+{
+        for (; len > 1; len -= 2) {
+                *(u16 *)dst = cpu_to_be16p(src++);
+                dst += 2;
+        }
+
+        if (len)
+                *dst = *src >> 8;
+}
+
+static void highlander_i2c_command(struct highlander_i2c_dev *dev,
+                                   u8 command, int len)
+{
+        unsigned int i;
+        u16 cmd = (command << 8) | command;
+
+        for (i = 0; i < len; i += 2) {
+                if (len - i == 1)
+                        cmd = command << 8;
+                iowrite16(cmd, dev->base + SMSADR + i);
+                dev_dbg(dev->dev, "command data[%x] 0x%04x\n", i/2, cmd);
+        }
+}
+
+static int highlander_i2c_wait_for_bbsy(struct highlander_i2c_dev *dev)
+{
+        unsigned long timeout;
+
+        timeout = jiffies + msecs_to_jiffies(iic_timeout);
+        while (ioread16(dev->base + SMCR) & SMCR_BBSY) {
+                if (time_after(jiffies, timeout)) {
+                        dev_warn(dev->dev, "timeout waiting for bus ready\n");
+                        return -ETIMEDOUT;
+                }
+
+                msleep(1);
+        }
+
+        return 0;
+}
+
+static int highlander_i2c_reset(struct highlander_i2c_dev *dev)
+{
+        iowrite16(ioread16(dev->base + SMCR) | SMCR_RST, dev->base + SMCR);
+        return highlander_i2c_wait_for_bbsy(dev);
+}
+
+static int highlander_i2c_wait_for_ack(struct highlander_i2c_dev *dev)
+{
+        u16 tmp = ioread16(dev->base + SMCR);
+
+        if ((tmp & (SMCR_IRIC | SMCR_ACKE)) == SMCR_ACKE) {
+                dev_warn(dev->dev, "ack abnormality\n");
+                return highlander_i2c_reset(dev);
+        }
+
+        return 0;
+}
+
+static irqreturn_t highlander_i2c_irq(int irq, void *dev_id)
+{
+        struct highlander_i2c_dev *dev = dev_id;
+
+        highlander_i2c_done(dev);
+        complete(&dev->cmd_complete);
+
+        return IRQ_HANDLED;
+}
+
+static void highlander_i2c_poll(struct highlander_i2c_dev *dev)
+{
+        unsigned long timeout;
+        u16 smcr;
+
+        timeout = jiffies + msecs_to_jiffies(iic_timeout);
+        for (;;) {
+                smcr = ioread16(dev->base + SMCR);
+
+                /*
+                 * Don't bother checking ACKE here, this and the reset
+                 * are handled in highlander_i2c_wait_xfer_done() when
+                 * waiting for the ACK.
+                 */
+
+                if (smcr & SMCR_IRIC)
+                        return;
+                if (time_after(jiffies, timeout))
+                        break;
+
+                cpu_relax();
+                cond_resched();
+        }
+
+        dev_err(dev->dev, "polling timed out\n");
+}
+
+static inline int highlander_i2c_wait_xfer_done(struct highlander_i2c_dev *dev)
+{
+        if (dev->irq)
+                wait_for_completion_timeout(&dev->cmd_complete,
+                                          msecs_to_jiffies(iic_timeout));
+        else
+                /* busy looping, the IRQ of champions */
+                highlander_i2c_poll(dev);
+
+        return highlander_i2c_wait_for_ack(dev);
+}
+
+static int highlander_i2c_read(struct highlander_i2c_dev *dev)
+{
+        int i, cnt;
+        u16 data[16];
+
+        if (highlander_i2c_wait_for_bbsy(dev))
+                return -EAGAIN;
+
+        highlander_i2c_start(dev);
+
+        if (highlander_i2c_wait_xfer_done(dev)) {
+                dev_err(dev->dev, "Arbitration loss\n");
+                return -EAGAIN;
+        }
+
+        /*
+         * The R0P7780LC0011RL FPGA needs a significant delay between
+         * data read cycles, otherwise the transciever gets confused and
+         * garbage is returned when the read is subsequently aborted.
+         *
+         * It is not sufficient to wait for BBSY.
+         *
+         * While this generally only applies to the older SH7780-based
+         * Highlanders, the same issue can be observed on SH7785 ones,
+         * albeit less frequently. SH7780-based Highlanders may need
+         * this to be as high as 1000 ms.
+         */
+        if (iic_read_delay && time_before(jiffies, dev->last_read_time +
+                                 msecs_to_jiffies(iic_read_delay)))
+                msleep(jiffies_to_msecs((dev->last_read_time +
+                                msecs_to_jiffies(iic_read_delay)) - jiffies));
+
+        cnt = (dev->buf_len + 1) >> 1;
+        for (i = 0; i < cnt; i++) {
+                data[i] = ioread16(dev->base + SMTRDR + (i * sizeof(u16)));
+                dev_dbg(dev->dev, "read data[%x] 0x%04x\n", i, data[i]);
+        }
+
+        smbus_read_data(data, dev->buf, dev->buf_len);
+
+        dev->last_read_time = jiffies;
+
+        return 0;
+}
+
+static int highlander_i2c_write(struct highlander_i2c_dev *dev)
+{
+        int i, cnt;
+        u16 data[16];
+
+        smbus_write_data(dev->buf, data, dev->buf_len);
+
+        cnt = (dev->buf_len + 1) >> 1;
+        for (i = 0; i < cnt; i++) {
+                iowrite16(data[i], dev->base + SMTRDR + (i * sizeof(u16)));
+                dev_dbg(dev->dev, "write data[%x] 0x%04x\n", i, data[i]);
+        }
+
+        if (highlander_i2c_wait_for_bbsy(dev))
+                return -EAGAIN;
+
+        highlander_i2c_start(dev);
+
+        return highlander_i2c_wait_xfer_done(dev);
+}
+
+static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+                                  unsigned short flags, char read_write,
+                                  u8 command, int size,
+                                  union i2c_smbus_data *data)
+{
+        struct highlander_i2c_dev *dev = i2c_get_adapdata(adap);
+        int read = read_write & I2C_SMBUS_READ;
+        u16 tmp;
+
+        init_completion(&dev->cmd_complete);
+
+        dev_dbg(dev->dev, "addr %04x, command %02x, read_write %d, size %d\n",
+                addr, command, read_write, size);
+
+        /*
+         * Set up the buffer and transfer size
+         */
+        switch (size) {
+        case I2C_SMBUS_BYTE_DATA:
+                dev->buf = &data->byte;
+                dev->buf_len = 1;
+                break;
+        case I2C_SMBUS_I2C_BLOCK_DATA:
+                dev->buf = &data->block[1];
+                dev->buf_len = data->block[0];
+                break;
+        default:
+                dev_err(dev->dev, "unsupported command %d\n", size);
+                return -EINVAL;
+        }
+
+        /*
+         * Encode the mode setting
+         */
+        tmp = ioread16(dev->base + SMMR);
+        tmp &= ~(SMMR_MODE0 | SMMR_MODE1);
+
+        switch (dev->buf_len) {
+        case 1:
+                /* default */
+                break;
+        case 8:
+                tmp |= SMMR_MODE0;
+                break;
+        case 16:
+                tmp |= SMMR_MODE1;
+                break;
+        case 32:
+                tmp |= (SMMR_MODE0 | SMMR_MODE1);
+                break;
+        default:
+                dev_err(dev->dev, "unsupported xfer size %d\n", dev->buf_len);
+                return -EINVAL;
+        }
+
+        iowrite16(tmp, dev->base + SMMR);
+
+        /* Ensure we're in a sane state */
+        highlander_i2c_done(dev);
+
+        /* Set slave address */
+        iowrite16((addr << 1) | read, dev->base + SMSMADR);
+
+        highlander_i2c_command(dev, command, dev->buf_len);
+
+        if (read)
+                return highlander_i2c_read(dev);
+        else
+                return highlander_i2c_write(dev);
+}
+
+static u32 highlander_i2c_func(struct i2c_adapter *adapter)
+{
+        return I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm highlander_i2c_algo = {
+        .smbus_xfer     = highlander_i2c_smbus_xfer,
+        .functionality  = highlander_i2c_func,
+};
+
+static int __devinit highlander_i2c_probe(struct platform_device *pdev)
+{
+        struct highlander_i2c_dev *dev;
+        struct i2c_adapter *adap;
+        struct resource *res;
+        int ret;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (unlikely(!res)) {
+                dev_err(&pdev->dev, "no mem resource\n");
+                return -ENODEV;
+        }
+
+        dev = kzalloc(sizeof(struct highlander_i2c_dev), GFP_KERNEL);
+        if (unlikely(!dev))
+                return -ENOMEM;
+
+        dev->base = ioremap_nocache(res->start, res->end - res->start + 1);
+        if (unlikely(!dev->base)) {
+                ret = -ENXIO;
+                goto err;
+        }
+
+        dev->dev = &pdev->dev;
+        platform_set_drvdata(pdev, dev);
+
+        dev->irq = platform_get_irq(pdev, 0);
+        if (iic_force_poll)
+                dev->irq = 0;
+
+        if (dev->irq) {
+                ret = request_irq(dev->irq, highlander_i2c_irq, IRQF_DISABLED,
+                                  pdev->name, dev);
+                if (unlikely(ret))
+                        goto err_unmap;
+
+                highlander_i2c_irq_enable(dev);
+        } else {
+                dev_notice(&pdev->dev, "no IRQ, using polling mode\n");
+                highlander_i2c_irq_disable(dev);
+        }
+
+        dev->last_read_time = jiffies;  /* initial read jiffies */
+
+        highlander_i2c_setup(dev);
+
+        adap = &dev->adapter;
+        i2c_set_adapdata(adap, dev);
+        adap->owner = THIS_MODULE;
+        adap->class = I2C_CLASS_HWMON;
+        strlcpy(adap->name, "HL FPGA I2C adapter", sizeof(adap->name));
+        adap->algo = &highlander_i2c_algo;
+        adap->dev.parent = &pdev->dev;
+        adap->nr = pdev->id;
+
+        /*
+         * Reset the adapter
+         */
+        ret = highlander_i2c_reset(dev);
+        if (unlikely(ret)) {
+                dev_err(&pdev->dev, "controller didn't come up\n");
+                goto err_free_irq;
+        }
+
+        ret = i2c_add_numbered_adapter(adap);
+        if (unlikely(ret)) {
+                dev_err(&pdev->dev, "failure adding adapter\n");
+                goto err_free_irq;
+        }
+
+        return 0;
+
+err_free_irq:
+        if (dev->irq)
+                free_irq(dev->irq, dev);
+err_unmap:
+        iounmap(dev->base);
+err:
+        kfree(dev);
+
+        platform_set_drvdata(pdev, NULL);
+
+        return ret;
+}
+
+static int __devexit highlander_i2c_remove(struct platform_device *pdev)
+{
+        struct highlander_i2c_dev *dev = platform_get_drvdata(pdev);
+
+        i2c_del_adapter(&dev->adapter);
+
+        if (dev->irq)
+                free_irq(dev->irq, dev);
+
+        iounmap(dev->base);
+        kfree(dev);
+
+        platform_set_drvdata(pdev, NULL);
+
+        return 0;
+}
+
+static struct platform_driver highlander_i2c_driver = {
+        .driver         = {
+                .name   = "i2c-highlander",
+                .owner  = THIS_MODULE,
+        },
+
+        .probe          = highlander_i2c_probe,
+        .remove         = __devexit_p(highlander_i2c_remove),
+};
+
+static int __init highlander_i2c_init(void)
+{
+        return platform_driver_register(&highlander_i2c_driver);
+}
+
+static void __exit highlander_i2c_exit(void)
+{
+        platform_driver_unregister(&highlander_i2c_driver);
+}
+
+module_init(highlander_i2c_init);
+module_exit(highlander_i2c_exit);
+
+MODULE_AUTHOR("Paul Mundt");
+MODULE_DESCRIPTION("Renesas Highlander FPGA I2C/SMBus adapter");
+MODULE_LICENSE("GPL v2");
+
+module_param(iic_force_poll, bool, 0);
+module_param(iic_force_normal, bool, 0);
+module_param(iic_timeout, int, 0);
+module_param(iic_read_delay, int, 0);
+
+MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
+MODULE_PARM_DESC(iic_force_normal,
+                 "Force normal mode (100 kHz), default is fast mode (400 kHz)");
+MODULE_PARM_DESC(iic_timeout, "Set timeout value in msecs (default 1000 ms)");
+MODULE_PARM_DESC(iic_read_delay,
+                 "Delay between data read cycles (default 0 ms)");
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 1098f21ace13..648aa7baff83 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -123,7 +123,7 @@ static int __devinit hydra_probe(struct pci_dev *dev,
                                 hydra_adap.name))
                 return -EBUSY;
 
-        hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0));
+        hydra_bit_data.data = pci_ioremap_bar(dev, 0);
         if (hydra_bit_data.data == NULL) {
                 release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
                 return -ENODEV;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index dc7ea32b69a8..5123eb69a971 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -41,6 +41,7 @@
   Tolapai               0x5032     32     hard     yes     yes     yes
   ICH10                 0x3a30     32     hard     yes     yes     yes
   ICH10                 0x3a60     32     hard     yes     yes     yes
+  PCH                   0x3b30     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) },
         { 0, }
 };
 
@@ -599,6 +601,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
         case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
         case PCI_DEVICE_ID_INTEL_ICH10_4:
         case PCI_DEVICE_ID_INTEL_ICH10_5:
+        case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
                 i801_features |= FEATURE_I2C_BLOCK_READ;
                 /* fall through */
         case PCI_DEVICE_ID_INTEL_82801DB_3:
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 27443f073bc9..a9a45fcc8544 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = {
         .name = "MPC adapter",
         .id = I2C_HW_MPC107,
         .algo = &mpc_algo,
-        .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .timeout = 1,
 };
 
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e7eb7bf9ddec..608038d64f81 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -589,11 +589,16 @@ omap_i2c_probe(struct platform_device *pdev)
 
         dev->dev = &pdev->dev;
         dev->irq = irq->start;
-        dev->base = (void __iomem *) IO_ADDRESS(mem->start);
+        dev->base = ioremap(mem->start, mem->end - mem->start + 1);
+        if (!dev->base) {
+                r = -ENOMEM;
+                goto err_free_mem;
+        }
+
         platform_set_drvdata(pdev, dev);
 
         if ((r = omap_i2c_get_clocks(dev)) != 0)
-                goto err_free_mem;
+                goto err_iounmap;
 
         omap_i2c_unidle(dev);
 
@@ -640,6 +645,8 @@ err_unuse_clocks:
         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
         omap_i2c_idle(dev);
         omap_i2c_put_clocks(dev);
+err_iounmap:
+        iounmap(dev->base);
 err_free_mem:
         platform_set_drvdata(pdev, NULL);
         kfree(dev);
@@ -661,6 +668,7 @@ omap_i2c_remove(struct platform_device *pdev)
         i2c_del_adapter(&dev->adapter);
         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
         omap_i2c_put_clocks(dev);
+        iounmap(dev->base);
         kfree(dev);
         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         release_mem_region(mem->start, (mem->end - mem->start) + 1);
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index c6faf9bdad18..b2b8380f6602 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -123,11 +123,6 @@ static struct i2c_adapter parport_adapter = {
 static int __devinit i2c_parport_probe(struct platform_device *pdev)
 {
         int err;
-        struct resource *res;
-
-        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-        if (!request_region(res->start, res->end - res->start + 1, DRVNAME))
-                return -EBUSY;
 
         /* Reset hardware to a sane state (SCL and SDA high) */
         parport_setsda(NULL, 1);
@@ -138,29 +133,19 @@ static int __devinit i2c_parport_probe(struct platform_device *pdev)
 
         parport_adapter.dev.parent = &pdev->dev;
         err = i2c_bit_add_bus(&parport_adapter);
-        if (err) {
+        if (err)
                 dev_err(&pdev->dev, "Unable to register with I2C\n");
-                goto exit_region;
-        }
-        return 0;
-
-exit_region:
-        release_region(res->start, res->end - res->start + 1);
         return err;
 }
 
 static int __devexit i2c_parport_remove(struct platform_device *pdev)
 {
-        struct resource *res;
-
         i2c_del_adapter(&parport_adapter);
 
         /* Un-init if needed (power off...) */
         if (adapter_parm[type].init.val)
                 line_set(0, &adapter_parm[type].init);
 
-        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-        release_region(res->start, res->end - res->start + 1);
         return 0;
 }
 
@@ -175,12 +160,6 @@ static struct platform_driver i2c_parport_driver = {
 
 static int __init i2c_parport_device_add(u16 address)
 {
-        struct resource res = {
-                .start  = address,
-                .end    = address + 2,
-                .name   = DRVNAME,
-                .flags  = IORESOURCE_IO,
-        };
         int err;
 
         pdev = platform_device_alloc(DRVNAME, -1);
@@ -190,13 +169,6 @@ static int __init i2c_parport_device_add(u16 address)
                 goto exit;
         }
 
-        err = platform_device_add_resources(pdev, &res, 1);
-        if (err) {
-                printk(KERN_ERR DRVNAME ": Device resource addition failed "
-                       "(%d)\n", err);
-                goto exit_device_put;
-        }
-
         err = platform_device_add(pdev);
         if (err) {
                 printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
@@ -231,13 +203,16 @@ static int __init i2c_parport_init(void)
                 base = DEFAULT_BASE;
         }
 
+        if (!request_region(base, 3, DRVNAME))
+                return -EBUSY;
+
         if (!adapter_parm[type].getscl.val)
                 parport_algo_data.getscl = NULL;
 
         /* Sets global pdev as a side effect */
         err = i2c_parport_device_add(base);
         if (err)
-                goto exit;
+                goto exit_release;
 
         err = platform_driver_register(&i2c_parport_driver);
         if (err)
@@ -247,7 +222,8 @@ static int __init i2c_parport_init(void)
 
 exit_device:
         platform_device_unregister(pdev);
-exit:
+exit_release:
+        release_region(base, 3);
         return err;
 }
 
@@ -255,6 +231,7 @@ static void __exit i2c_parport_exit(void)
 {
         platform_driver_unregister(&i2c_parport_driver);
         platform_device_unregister(pdev);
+        release_region(base, 3);
 }
 
 MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index a119784bae10..9eb76268ec78 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -36,8 +36,8 @@
 #define DRIVER "i2c-pca-isa"
 #define IO_SIZE 4
 
-static unsigned long base   = 0x330;
-static int irq    = 10;
+static unsigned long base;
+static int irq = -1;
 
 /* Data sheet recommends 59kHz for 100kHz operation due to variation
  * in the actual clock rate */
@@ -107,13 +107,26 @@ static struct i2c_adapter pca_isa_ops = {
         .timeout        = 100,
 };
 
+static int __devinit pca_isa_match(struct device *dev, unsigned int id)
+{
+        int match = base != 0;
+
+        if (match) {
+                if (irq <= -1)
+                        dev_warn(dev, "Using polling mode (specify irq)\n");
+        } else
+                dev_err(dev, "Please specify I/O base\n");
+
+        return match;
+}
+
 static int __devinit pca_isa_probe(struct device *dev, unsigned int id)
 {
         init_waitqueue_head(&pca_wait);
 
         dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
 
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
         if (check_legacy_ioport(base)) {
                 dev_err(dev, "I/O address %#08lx is not available\n", base);
                 goto out;
@@ -153,7 +166,7 @@ static int __devexit pca_isa_remove(struct device *dev, unsigned int id)
 {
         i2c_del_adapter(&pca_isa_ops);
 
-        if (irq > 0) {
+        if (irq > -1) {
                 disable_irq(irq);
                 free_irq(irq, &pca_isa_ops);
         }
@@ -163,6 +176,7 @@ static int __devexit pca_isa_remove(struct device *dev, unsigned int id)
 }
 
 static struct isa_driver pca_isa_driver = {
+        .match          = pca_isa_match,
         .probe          = pca_isa_probe,
         .remove         = __devexit_p(pca_isa_remove),
         .driver = {
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 0e7b1c6724aa..60ca91745e55 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -259,6 +259,35 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev)
         }
 
         printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+
+        if (!strncmp(basename, "uni-n", 5)) {
+                struct device_node *np;
+                const u32 *prop;
+                struct i2c_board_info info;
+
+                /* Instantiate I2C motion sensor if present */
+                np = of_find_node_by_name(NULL, "accelerometer");
+                if (np && of_device_is_compatible(np, "AAPL,accelerometer_1") &&
+                    (prop = of_get_property(np, "reg", NULL))) {
+                        int i2c_bus;
+                        const char *tmp_bus;
+
+                        /* look for bus either using "reg" or by path */
+                        tmp_bus = strstr(np->full_name, "/i2c-bus@");
+                        if (tmp_bus)
+                                i2c_bus = *(tmp_bus + 9) - '0';
+                        else
+                                i2c_bus = ((*prop) >> 8) & 0x0f;
+
+                        if (pmac_i2c_get_channel(bus) == i2c_bus) {
+                                memset(&info, 0, sizeof(struct i2c_board_info));
+                                info.addr = ((*prop) & 0xff) >> 1;
+                                strlcpy(info.type, "ams", I2C_NAME_SIZE);
+                                i2c_new_device(adapter, &info);
+                        }
+                }
+        }
+
         return rc;
 }
 
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 44d838410f15..906f9b9d715d 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -38,7 +38,44 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <mach/i2c.h>
-#include <mach/pxa-regs.h>
+
+/*
+ * I2C registers and bit definitions
+ */
+#define IBMR            (0x00)
+#define IDBR            (0x08)
+#define ICR             (0x10)
+#define ISR             (0x18)
+#define ISAR            (0x20)
+
+#define ICR_START       (1 << 0)           /* start bit */
+#define ICR_STOP        (1 << 1)           /* stop bit */
+#define ICR_ACKNAK      (1 << 2)           /* send ACK(0) or NAK(1) */
+#define ICR_TB          (1 << 3)           /* transfer byte bit */
+#define ICR_MA          (1 << 4)           /* master abort */
+#define ICR_SCLE        (1 << 5)           /* master clock enable */
+#define ICR_IUE         (1 << 6)           /* unit enable */
+#define ICR_GCD         (1 << 7)           /* general call disable */
+#define ICR_ITEIE       (1 << 8)           /* enable tx interrupts */
+#define ICR_IRFIE       (1 << 9)           /* enable rx interrupts */
+#define ICR_BEIE        (1 << 10)          /* enable bus error ints */
+#define ICR_SSDIE       (1 << 11)          /* slave STOP detected int enable */
+#define ICR_ALDIE       (1 << 12)          /* enable arbitration interrupt */
+#define ICR_SADIE       (1 << 13)          /* slave address detected int enable */
+#define ICR_UR          (1 << 14)          /* unit reset */
+#define ICR_FM          (1 << 15)          /* fast mode */
+
+#define ISR_RWM         (1 << 0)           /* read/write mode */
+#define ISR_ACKNAK      (1 << 1)           /* ack/nak status */
+#define ISR_UB          (1 << 2)           /* unit busy */
+#define ISR_IBB         (1 << 3)           /* bus busy */
+#define ISR_SSD         (1 << 4)           /* slave stop detected */
+#define ISR_ALD         (1 << 5)           /* arbitration loss detected */
+#define ISR_ITE         (1 << 6)           /* tx buffer empty */
+#define ISR_IRF         (1 << 7)           /* rx buffer full */
+#define ISR_GCAD        (1 << 8)           /* general call address detected */
+#define ISR_SAD         (1 << 9)           /* slave address detected */
+#define ISR_BED         (1 << 10)          /* bus error no ACK/NAK */
 
 struct pxa_i2c {
         spinlock_t              lock;
@@ -60,19 +97,21 @@ struct pxa_i2c {
         u32                     icrlog[32];
 
         void __iomem            *reg_base;
+        unsigned int            reg_shift;
 
         unsigned long           iobase;
         unsigned long           iosize;
 
         int                     irq;
-        int                     use_pio;
+        unsigned int            use_pio :1;
+        unsigned int            fast_mode :1;
 };
 
-#define _IBMR(i2c)      ((i2c)->reg_base + 0)
-#define _IDBR(i2c)      ((i2c)->reg_base + 8)
-#define _ICR(i2c)       ((i2c)->reg_base + 0x10)
-#define _ISR(i2c)       ((i2c)->reg_base + 0x18)
-#define _ISAR(i2c)      ((i2c)->reg_base + 0x20)
+#define _IBMR(i2c)      ((i2c)->reg_base + (0x0 << (i2c)->reg_shift))
+#define _IDBR(i2c)      ((i2c)->reg_base + (0x4 << (i2c)->reg_shift))
+#define _ICR(i2c)       ((i2c)->reg_base + (0x8 << (i2c)->reg_shift))
+#define _ISR(i2c)       ((i2c)->reg_base + (0xc << (i2c)->reg_shift))
+#define _ISAR(i2c)      ((i2c)->reg_base + (0x10 << (i2c)->reg_shift))
 
 /*
  * I2C Slave mode address
@@ -188,14 +227,14 @@ static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
 
 static void i2c_pxa_abort(struct pxa_i2c *i2c)
 {
-        unsigned long timeout = jiffies + HZ/4;
+        int i = 250;
 
         if (i2c_pxa_is_slavemode(i2c)) {
                 dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__);
                 return;
         }
 
-        while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) {
+        while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) {
                 unsigned long icr = readl(_ICR(i2c));
 
                 icr &= ~ICR_START;
@@ -205,7 +244,8 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c)
 
                 show_state(i2c);
 
-                msleep(1);
+                mdelay(1);
+                i --;
         }
 
         writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
@@ -364,7 +404,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
         writel(i2c->slave_addr, _ISAR(i2c));
 
         /* set control register values */
-        writel(I2C_ICR_INIT, _ICR(i2c));
+        writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
 
 #ifdef CONFIG_I2C_PXA_SLAVE
         dev_info(&i2c->adap.dev, "Enabling slave mode\n");
@@ -907,12 +947,6 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
         struct pxa_i2c *i2c = adap->algo_data;
         int ret, i;
 
-        /* If the I2C controller is disabled we need to reset it (probably due
-           to a suspend/resume destroying state). We do this here as we can then
-           avoid worrying about resuming the controller before its users. */
-        if (!(readl(_ICR(i2c)) & ICR_IUE))
-                i2c_pxa_reset(i2c);
-
         for (i = adap->retries; i >= 0; i--) {
                 ret = i2c_pxa_do_xfer(i2c, msgs, num);
                 if (ret != I2C_RETRY)
@@ -993,6 +1027,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
                 ret = -EIO;
                 goto eremap;
         }
+        i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
 
         i2c->iobase = res->start;
         i2c->iosize = res_len(res);
@@ -1013,6 +1048,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
         if (plat) {
                 i2c->adap.class = plat->class;
                 i2c->use_pio = plat->use_pio;
+                i2c->fast_mode = plat->fast_mode;
         }
 
         if (i2c->use_pio) {
@@ -1082,9 +1118,33 @@ static int __exit i2c_pxa_remove(struct platform_device *dev)
         return 0;
 }
 
+#ifdef CONFIG_PM
+static int i2c_pxa_suspend_late(struct platform_device *dev, pm_message_t state)
+{
+        struct pxa_i2c *i2c = platform_get_drvdata(dev);
+        clk_disable(i2c->clk);
+        return 0;
+}
+
+static int i2c_pxa_resume_early(struct platform_device *dev)
+{
+        struct pxa_i2c *i2c = platform_get_drvdata(dev);
+
+        clk_enable(i2c->clk);
+        i2c_pxa_reset(i2c);
+
+        return 0;
+}
+#else
+#define i2c_pxa_suspend_late NULL
+#define i2c_pxa_resume_early NULL
+#endif
+
 static struct platform_driver i2c_pxa_driver = {
         .probe          = i2c_pxa_probe,
         .remove         = __exit_p(i2c_pxa_remove),
+        .suspend_late   = i2c_pxa_suspend_late,
+        .resume_early   = i2c_pxa_resume_early,
         .driver         = {
                 .name   = "pxa2xx-i2c",
                 .owner  = THIS_MODULE,
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index c772e02c2803..1fac4e233133 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -507,7 +507,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
         unsigned long timeout;
         int ret;
 
-        if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)
+        if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
                 return -EIO;
 
         ret = s3c24xx_i2c_set_master(i2c);
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 640cbb237328..3384a717fec0 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -318,7 +318,8 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
                 } else
                         data = i2c_op(pd, OP_RX, 0);
 
-                pd->msg->buf[real_pos] = data;
+                if (real_pos >= 0)
+                        pd->msg->buf[real_pos] = data;
         } while (0);
 
         pd->pos++;
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 862eb352a2d9..9f194d9efd91 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -36,6 +36,7 @@
    VT8237S            0x3372             yes
    VT8251             0x3287             yes
    CX700              0x8324             yes
+   VX800/VX820        0x8353             yes
 
    Note: we assume there can only be one device, with one SMBus interface.
 */
@@ -82,6 +83,7 @@ static unsigned short SMBHSTCFG = 0xD2;
 #define VT596_BYTE              0x04
 #define VT596_BYTE_DATA         0x08
 #define VT596_WORD_DATA         0x0C
+#define VT596_PROC_CALL         0x10
 #define VT596_BLOCK_DATA        0x14
 #define VT596_I2C_BLOCK_DATA    0x34
 
@@ -232,6 +234,12 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
                 }
                 size = VT596_WORD_DATA;
                 break;
+        case I2C_SMBUS_PROC_CALL:
+                outb_p(command, SMBHSTCMD);
+                outb_p(data->word & 0xff, SMBHSTDAT0);
+                outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+                size = VT596_PROC_CALL;
+                break;
         case I2C_SMBUS_I2C_BLOCK_DATA:
                 if (!(vt596_features & FEATURE_I2CBLOCK))
                         goto exit_unsupported;
@@ -262,6 +270,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
         if (status)
                 return status;
 
+        if (size == VT596_PROC_CALL)
+                read_write = I2C_SMBUS_READ;
+
         if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
                 return 0;
 
@@ -271,6 +282,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
                 data->byte = inb_p(SMBHSTDAT0);
                 break;
         case VT596_WORD_DATA:
+        case VT596_PROC_CALL:
                 data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
                 break;
         case VT596_I2C_BLOCK_DATA:
@@ -295,7 +307,7 @@ static u32 vt596_func(struct i2c_adapter *adapter)
 {
         u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
             I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-            I2C_FUNC_SMBUS_BLOCK_DATA;
+            I2C_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA;
 
         if (vt596_features & FEATURE_I2CBLOCK)
                 func |= I2C_FUNC_SMBUS_I2C_BLOCK;
@@ -320,10 +332,6 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
         unsigned char temp;
         int error = -ENODEV;
 
-        /* driver_data might come from user-space, so check it */
-        if (id->driver_data & 1 || id->driver_data > 0xff)
-                return -EINVAL;
-
         /* Determine the address of the SMBus areas */
         if (force_addr) {
                 vt596_smba = force_addr & 0xfff0;
@@ -396,6 +404,7 @@ found:
 
         switch (pdev->device) {
         case PCI_DEVICE_ID_VIA_CX700:
+        case PCI_DEVICE_ID_VIA_VX800:
         case PCI_DEVICE_ID_VIA_8251:
         case PCI_DEVICE_ID_VIA_8237:
         case PCI_DEVICE_ID_VIA_8237A:
@@ -459,6 +468,8 @@ static struct pci_device_id vt596_ids[] = {
           .driver_data = SMBBA3 },
         { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700),
           .driver_data = SMBBA3 },
+        { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
+          .driver_data = SMBBA3 },
         { 0, }
 };
 
@@ -468,7 +479,6 @@ static struct pci_driver vt596_driver = {
         .name           = "vt596_smbus",
         .id_table       = vt596_ids,
         .probe          = vt596_probe,
-        .dynids.use_driver_data = 1,
 };
 
 static int __init i2c_vt596_init(void)
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index c3022a023449..e4c98539c517 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -81,6 +81,7 @@ static struct i2c_algo_bit_data scx200_i2c_data = {
 
 static struct i2c_adapter scx200_i2c_ops = {
         .owner             = THIS_MODULE,
+        .class             = I2C_CLASS_HWMON | I2C_CLASS_SPD,
         .id                = I2C_HW_B_SCX200,
         .algo_data         = &scx200_i2c_data,
         .name   = "NatSemi SCx200 I2C",
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index a95cb9465d65..4c35702830ce 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -1,6 +1,8 @@
 #
 # Miscellaneous I2C chip drivers configuration
 #
+# *** DEPRECATED! Do not add new entries! See Makefile ***
+#
 
 menu "Miscellaneous I2C Chip support"
 
@@ -172,4 +174,15 @@ config MENELAUS
           and other features that are often used in portable devices like
           cell phones and PDAs.
 
+config MCU_MPC8349EMITX
+        tristate "MPC8349E-mITX MCU driver"
+        depends on I2C && PPC_83xx
+        select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+        help
+          Say Y here to enable soft power-off functionality on the Freescale
+          boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+          also register MCU GPIOs with the generic GPIO API, so you'll able
+          to use MCU pins as GPIOs.
+
 endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 39e3e69ed125..23d2a31b0a64 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -1,7 +1,8 @@
 #
 # Makefile for miscellaneous I2C chip drivers.
 #
-# Think twice before you add a new driver to this directory.
+# Do not add new drivers to this directory! It is DEPRECATED.
+#
 # Device drivers are better grouped according to the functionality they
 # implement rather than to the bus they are connected to. In particular:
 # * Hardware monitoring chip drivers go to drivers/hwmon
@@ -21,6 +22,7 @@ obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TPS65010)          += tps65010.o
 obj-$(CONFIG_MENELAUS)          += menelaus.o
 obj-$(CONFIG_SENSORS_TSL2550)   += tsl2550.o
+obj-$(CONFIG_MCU_MPC8349EMITX)  += mcu_mpc8349emitx.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c
index 2a4acb269569..d4775528abc6 100644
--- a/drivers/i2c/chips/at24.c
+++ b/drivers/i2c/chips/at24.c
@@ -460,7 +460,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
          */
         at24->bin.attr.name = "eeprom";
         at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
-        at24->bin.attr.owner = THIS_MODULE;
         at24->bin.read = at24_bin_read;
         at24->bin.size = chip.byte_len;
 
diff --git a/drivers/i2c/chips/ds1682.c b/drivers/i2c/chips/ds1682.c
index 23be4d42cb02..f3ee4a1abb77 100644
--- a/drivers/i2c/chips/ds1682.c
+++ b/drivers/i2c/chips/ds1682.c
@@ -190,7 +190,6 @@ static struct bin_attribute ds1682_eeprom_attr = {
         .attr = {
                 .name = "eeprom",
                 .mode = S_IRUGO | S_IWUSR,
-                .owner = THIS_MODULE,
         },
         .size = DS1682_EEPROM_SIZE,
         .read = ds1682_eeprom_read,
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 4655b794ebe3..28902ebd5539 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -49,10 +49,9 @@ MODULE_LICENSE("GPL");
 
 struct isp1301 {
         struct otg_transceiver  otg;
-        struct i2c_client       client;
+        struct i2c_client       *client;
         void                    (*i2c_release)(struct device *dev);
 
-        int                     irq;
         int                     irq_type;
 
         u32                     last_otg_ctrl;
@@ -138,14 +137,6 @@ static inline void notresponding(struct isp1301 *isp)
 
 /*-------------------------------------------------------------------------*/
 
-/* only two addresses possible */
-#define ISP_BASE                0x2c
-static unsigned short normal_i2c[] = {
-        ISP_BASE, ISP_BASE + 1,
-        I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
 static struct i2c_driver isp1301_driver;
 
 /* smbus apis are used for portability */
@@ -153,25 +144,25 @@ static struct i2c_driver isp1301_driver;
 static inline u8
 isp1301_get_u8(struct isp1301 *isp, u8 reg)
 {
-        return i2c_smbus_read_byte_data(&isp->client, reg + 0);
+        return i2c_smbus_read_byte_data(isp->client, reg + 0);
 }
 
 static inline int
 isp1301_get_u16(struct isp1301 *isp, u8 reg)
 {
-        return i2c_smbus_read_word_data(&isp->client, reg);
+        return i2c_smbus_read_word_data(isp->client, reg);
 }
 
 static inline int
 isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits)
 {
-        return i2c_smbus_write_byte_data(&isp->client, reg + 0, bits);
+        return i2c_smbus_write_byte_data(isp->client, reg + 0, bits);
 }
 
 static inline int
 isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
 {
-        return i2c_smbus_write_byte_data(&isp->client, reg + 1, bits);
+        return i2c_smbus_write_byte_data(isp->client, reg + 1, bits);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -349,10 +340,10 @@ isp1301_defer_work(struct isp1301 *isp, int work)
         int status;
 
         if (isp && !test_and_set_bit(work, &isp->todo)) {
-                (void) get_device(&isp->client.dev);
+                (void) get_device(&isp->client->dev);
                 status = schedule_work(&isp->work);
                 if (!status && !isp->working)
-                        dev_vdbg(&isp->client.dev,
+                        dev_vdbg(&isp->client->dev,
                                 "work item %d may be lost\n", work);
         }
 }
@@ -1135,7 +1126,7 @@ isp1301_work(struct work_struct *work)
                 /* transfer state from otg engine to isp1301 */
                 if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) {
                         otg_update_isp(isp);
-                        put_device(&isp->client.dev);
+                        put_device(&isp->client->dev);
                 }
 #endif
                 /* transfer state from isp1301 to otg engine */
@@ -1143,7 +1134,7 @@ isp1301_work(struct work_struct *work)
                         u8              stat = isp1301_clear_latch(isp);
 
                         isp_update_otg(isp, stat);
-                        put_device(&isp->client.dev);
+                        put_device(&isp->client->dev);
                 }
 
                 if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) {
@@ -1178,7 +1169,7 @@ isp1301_work(struct work_struct *work)
                         }
                         host_resume(isp);
                         // mdelay(10);
-                        put_device(&isp->client.dev);
+                        put_device(&isp->client->dev);
                 }
 
                 if (test_and_clear_bit(WORK_TIMER, &isp->todo)) {
@@ -1187,15 +1178,15 @@ isp1301_work(struct work_struct *work)
                         if (!stop)
                                 mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
 #endif
-                        put_device(&isp->client.dev);
+                        put_device(&isp->client->dev);
                 }
 
                 if (isp->todo)
-                        dev_vdbg(&isp->client.dev,
+                        dev_vdbg(&isp->client->dev,
                                 "work done, todo = 0x%lx\n",
                                 isp->todo);
                 if (stop) {
-                        dev_dbg(&isp->client.dev, "stop\n");
+                        dev_dbg(&isp->client->dev, "stop\n");
                         break;
                 }
         } while (isp->todo);
@@ -1219,7 +1210,7 @@ static void isp1301_release(struct device *dev)
 {
         struct isp1301  *isp;
 
-        isp = container_of(dev, struct isp1301, client.dev);
+        isp = dev_get_drvdata(dev);
 
         /* ugly -- i2c hijacks our memory hook to wait_for_completion() */
         if (isp->i2c_release)
@@ -1229,15 +1220,15 @@ static void isp1301_release(struct device *dev)
 
 static struct isp1301 *the_transceiver;
 
-static int isp1301_detach_client(struct i2c_client *i2c)
+static int __exit isp1301_remove(struct i2c_client *i2c)
 {
         struct isp1301  *isp;
 
-        isp = container_of(i2c, struct isp1301, client);
+        isp = i2c_get_clientdata(i2c);
 
         isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
         isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
-        free_irq(isp->irq, isp);
+        free_irq(i2c->irq, isp);
 #ifdef  CONFIG_USB_OTG
         otg_unbind(isp);
 #endif
@@ -1252,7 +1243,7 @@ static int isp1301_detach_client(struct i2c_client *i2c)
         put_device(&i2c->dev);
         the_transceiver = 0;
 
-        return i2c_detach_client(i2c);
+        return 0;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1285,7 +1276,7 @@ static int isp1301_otg_enable(struct isp1301 *isp)
         isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
                 INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
 
-        dev_info(&isp->client.dev, "ready for dual-role USB ...\n");
+        dev_info(&isp->client->dev, "ready for dual-role USB ...\n");
 
         return 0;
 }
@@ -1310,7 +1301,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
 
 #ifdef  CONFIG_USB_OTG
         isp->otg.host = host;
-        dev_dbg(&isp->client.dev, "registered host\n");
+        dev_dbg(&isp->client->dev, "registered host\n");
         host_suspend(isp);
         if (isp->otg.gadget)
                 return isp1301_otg_enable(isp);
@@ -1325,7 +1316,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
         if (machine_is_omap_h2())
                 isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
 
-        dev_info(&isp->client.dev, "A-Host sessions ok\n");
+        dev_info(&isp->client->dev, "A-Host sessions ok\n");
         isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
                 INTR_ID_GND);
         isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
@@ -1343,7 +1334,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
         return 0;
 
 #else
-        dev_dbg(&isp->client.dev, "host sessions not allowed\n");
+        dev_dbg(&isp->client->dev, "host sessions not allowed\n");
         return -EINVAL;
 #endif
 
@@ -1370,7 +1361,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
 
 #ifdef  CONFIG_USB_OTG
         isp->otg.gadget = gadget;
-        dev_dbg(&isp->client.dev, "registered gadget\n");
+        dev_dbg(&isp->client->dev, "registered gadget\n");
         /* gadget driver may be suspended until vbus_connect () */
         if (isp->otg.host)
                 return isp1301_otg_enable(isp);
@@ -1395,7 +1386,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
                 INTR_SESS_VLD);
         isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
                 INTR_VBUS_VLD);
-        dev_info(&isp->client.dev, "B-Peripheral sessions ok\n");
+        dev_info(&isp->client->dev, "B-Peripheral sessions ok\n");
         dump_regs(isp, __func__);
 
         /* If this has a Mini-AB connector, this mode is highly
@@ -1408,7 +1399,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
         return 0;
 
 #else
-        dev_dbg(&isp->client.dev, "peripheral sessions not allowed\n");
+        dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n");
         return -EINVAL;
 #endif
 }
@@ -1508,12 +1499,10 @@ isp1301_start_hnp(struct otg_transceiver *dev)
 
 /*-------------------------------------------------------------------------*/
 
-/* no error returns, they'd just make bus scanning stop */
-static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
+static int __init isp1301_probe(struct i2c_client *i2c)
 {
         int                     status;
         struct isp1301          *isp;
-        struct i2c_client       *i2c;
 
         if (the_transceiver)
                 return 0;
@@ -1527,37 +1516,19 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
         isp->timer.function = isp1301_timer;
         isp->timer.data = (unsigned long) isp;
 
-        isp->irq = -1;
-        isp->client.addr = address;
-        i2c_set_clientdata(&isp->client, isp);
-        isp->client.adapter = bus;
-        isp->client.driver = &isp1301_driver;
-        strlcpy(isp->client.name, DRIVER_NAME, I2C_NAME_SIZE);
-        i2c = &isp->client;
-
-        /* if this is a true probe, verify the chip ... */
-        if (kind < 0) {
-                status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
-                if (status != I2C_VENDOR_ID_PHILIPS) {
-                        dev_dbg(&bus->dev, "addr %d not philips id: %d\n",
-                                address, status);
-                        goto fail1;
-                }
-                status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
-                if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
-                        dev_dbg(&bus->dev, "%d not isp1301, %d\n",
-                                address, status);
-                        goto fail1;
-                }
-        }
+        i2c_set_clientdata(i2c, isp);
+        isp->client = i2c;
 
-        status = i2c_attach_client(i2c);
-        if (status < 0) {
-                dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
-                                DRIVER_NAME, address, status);
-fail1:
-                kfree(isp);
-                return 0;
+        /* verify the chip (shouldn't be necesary) */
+        status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
+        if (status != I2C_VENDOR_ID_PHILIPS) {
+                dev_dbg(&i2c->dev, "not philips id: %d\n", status);
+                goto fail;
+        }
+        status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
+        if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
+                dev_dbg(&i2c->dev, "not isp1301, %d\n", status);
+                goto fail;
         }
         isp->i2c_release = i2c->dev.release;
         i2c->dev.release = isp1301_release;
@@ -1586,7 +1557,7 @@ fail1:
         status = otg_bind(isp);
         if (status < 0) {
                 dev_dbg(&i2c->dev, "can't bind OTG\n");
-                goto fail2;
+                goto fail;
         }
 #endif
 
@@ -1599,26 +1570,21 @@ fail1:
 
                 /* IRQ wired at M14 */
                 omap_cfg_reg(M14_1510_GPIO2);
-                isp->irq = OMAP_GPIO_IRQ(2);
                 if (gpio_request(2, "isp1301") == 0)
                         gpio_direction_input(2);
                 isp->irq_type = IRQF_TRIGGER_FALLING;
         }
 
         isp->irq_type |= IRQF_SAMPLE_RANDOM;
-        status = request_irq(isp->irq, isp1301_irq,
+        status = request_irq(i2c->irq, isp1301_irq,
                         isp->irq_type, DRIVER_NAME, isp);
         if (status < 0) {
                 dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
-                                isp->irq, status);
-#ifdef  CONFIG_USB_OTG
-fail2:
-#endif
-                i2c_detach_client(i2c);
-                goto fail1;
+                                i2c->irq, status);
+                goto fail;
         }
 
-        isp->otg.dev = &isp->client.dev;
+        isp->otg.dev = &i2c->dev;
         isp->otg.label = DRIVER_NAME;
 
         isp->otg.set_host = isp1301_set_host,
@@ -1649,22 +1615,25 @@ fail2:
                         status);
 
         return 0;
-}
 
-static int isp1301_scan_bus(struct i2c_adapter *bus)
-{
-        if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA
-                        | I2C_FUNC_SMBUS_READ_WORD_DATA))
-                return -EINVAL;
-        return i2c_probe(bus, &addr_data, isp1301_probe);
+fail:
+        kfree(isp);
+        return -ENODEV;
 }
 
+static const struct i2c_device_id isp1301_id[] = {
+        { "isp1301_omap", 0 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
+
 static struct i2c_driver isp1301_driver = {
         .driver = {
                 .name   = "isp1301_omap",
         },
-        .attach_adapter = isp1301_scan_bus,
-        .detach_client  = isp1301_detach_client,
+        .probe          = isp1301_probe,
+        .remove         = __exit_p(isp1301_remove),
+        .id_table       = isp1301_id,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/drivers/i2c/chips/mcu_mpc8349emitx.c
new file mode 100644
index 000000000000..82a9bcb858b6
--- /dev/null
+++ b/drivers/i2c/chips/mcu_mpc8349emitx.c
@@ -0,0 +1,209 @@
+/*
+ * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU
+ *
+ * Copyright (c) 2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+
+/*
+ * I don't have specifications for the MCU firmware, I found this register
+ * and bits positions by the trial&error method.
+ */
+#define MCU_REG_CTRL    0x20
+#define MCU_CTRL_POFF   0x40
+
+#define MCU_NUM_GPIO    2
+
+struct mcu {
+        struct mutex lock;
+        struct device_node *np;
+        struct i2c_client *client;
+        struct of_gpio_chip of_gc;
+        u8 reg_ctrl;
+};
+
+static struct mcu *glob_mcu;
+
+static void mcu_power_off(void)
+{
+        struct mcu *mcu = glob_mcu;
+
+        pr_info("Sending power-off request to the MCU...\n");
+        mutex_lock(&mcu->lock);
+        i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL,
+                                  mcu->reg_ctrl | MCU_CTRL_POFF);
+        mutex_unlock(&mcu->lock);
+}
+
+static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+        struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
+        struct mcu *mcu = container_of(of_gc, struct mcu, of_gc);
+        u8 bit = 1 << (4 + gpio);
+
+        mutex_lock(&mcu->lock);
+        if (val)
+                mcu->reg_ctrl &= ~bit;
+        else
+                mcu->reg_ctrl |= bit;
+
+        i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl);
+        mutex_unlock(&mcu->lock);
+}
+
+static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+        mcu_gpio_set(gc, gpio, val);
+        return 0;
+}
+
+static int mcu_gpiochip_add(struct mcu *mcu)
+{
+        struct device_node *np;
+        struct of_gpio_chip *of_gc = &mcu->of_gc;
+        struct gpio_chip *gc = &of_gc->gc;
+        int ret;
+
+        np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx");
+        if (!np)
+                return -ENODEV;
+
+        gc->owner = THIS_MODULE;
+        gc->label = np->full_name;
+        gc->can_sleep = 1;
+        gc->ngpio = MCU_NUM_GPIO;
+        gc->base = -1;
+        gc->set = mcu_gpio_set;
+        gc->direction_output = mcu_gpio_dir_out;
+        of_gc->gpio_cells = 2;
+        of_gc->xlate = of_gpio_simple_xlate;
+
+        np->data = of_gc;
+        mcu->np = np;
+
+        /*
+         * We don't want to lose the node, its ->data and ->full_name...
+         * So, if succeeded, we don't put the node here.
+         */
+        ret = gpiochip_add(gc);
+        if (ret)
+                of_node_put(np);
+        return ret;
+}
+
+static int mcu_gpiochip_remove(struct mcu *mcu)
+{
+        int ret;
+
+        ret = gpiochip_remove(&mcu->of_gc.gc);
+        if (ret)
+                return ret;
+        of_node_put(mcu->np);
+
+        return 0;
+}
+
+static int __devinit mcu_probe(struct i2c_client *client,
+                               const struct i2c_device_id *id)
+{
+        struct mcu *mcu;
+        int ret;
+
+        mcu = kzalloc(sizeof(*mcu), GFP_KERNEL);
+        if (!mcu)
+                return -ENOMEM;
+
+        mutex_init(&mcu->lock);
+        mcu->client = client;
+        i2c_set_clientdata(client, mcu);
+
+        ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+        if (ret < 0)
+                goto err;
+        mcu->reg_ctrl = ret;
+
+        ret = mcu_gpiochip_add(mcu);
+        if (ret)
+                goto err;
+
+        /* XXX: this is potentially racy, but there is no lock for ppc_md */
+        if (!ppc_md.power_off) {
+                glob_mcu = mcu;
+                ppc_md.power_off = mcu_power_off;
+                dev_info(&client->dev, "will provide power-off service\n");
+        }
+
+        return 0;
+err:
+        kfree(mcu);
+        return ret;
+}
+
+static int __devexit mcu_remove(struct i2c_client *client)
+{
+        struct mcu *mcu = i2c_get_clientdata(client);
+        int ret;
+
+        if (glob_mcu == mcu) {
+                ppc_md.power_off = NULL;
+                glob_mcu = NULL;
+        }
+
+        ret = mcu_gpiochip_remove(mcu);
+        if (ret)
+                return ret;
+        i2c_set_clientdata(client, NULL);
+        kfree(mcu);
+        return 0;
+}
+
+static const struct i2c_device_id mcu_ids[] = {
+        { "mcu-mpc8349emitx", },
+        {},
+};
+MODULE_DEVICE_TABLE(i2c, mcu_ids);
+
+static struct i2c_driver mcu_driver = {
+        .driver = {
+                .name = "mcu-mpc8349emitx",
+                .owner = THIS_MODULE,
+        },
+        .probe = mcu_probe,
+        .remove = __devexit_p(mcu_remove),
+        .id_table = mcu_ids,
+};
+
+static int __init mcu_init(void)
+{
+        return i2c_add_driver(&mcu_driver);
+}
+module_init(mcu_init);
+
+static void __exit mcu_exit(void)
+{
+        i2c_del_driver(&mcu_driver);
+}
+module_exit(mcu_exit);
+
+MODULE_DESCRIPTION("Power Management and GPIO expander driver for "
+                   "MPC8349E-mITX-compatible MCU");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index 176126d3a01d..4b364bae6b3e 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -832,52 +832,52 @@ static irqreturn_t menelaus_irq(int irq, void *_menelaus)
 
 static void menelaus_to_time(char *regs, struct rtc_time *t)
 {
-        t->tm_sec = BCD2BIN(regs[0]);
-        t->tm_min = BCD2BIN(regs[1]);
+        t->tm_sec = bcd2bin(regs[0]);
+        t->tm_min = bcd2bin(regs[1]);
         if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
-                t->tm_hour = BCD2BIN(regs[2] & 0x1f) - 1;
+                t->tm_hour = bcd2bin(regs[2] & 0x1f) - 1;
                 if (regs[2] & RTC_HR_PM)
                         t->tm_hour += 12;
         } else
-                t->tm_hour = BCD2BIN(regs[2] & 0x3f);
-        t->tm_mday = BCD2BIN(regs[3]);
-        t->tm_mon = BCD2BIN(regs[4]) - 1;
-        t->tm_year = BCD2BIN(regs[5]) + 100;
+                t->tm_hour = bcd2bin(regs[2] & 0x3f);
+        t->tm_mday = bcd2bin(regs[3]);
+        t->tm_mon = bcd2bin(regs[4]) - 1;
+        t->tm_year = bcd2bin(regs[5]) + 100;
 }
 
 static int time_to_menelaus(struct rtc_time *t, int regnum)
 {
         int     hour, status;
 
-        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_sec));
+        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_sec));
         if (status < 0)
                 goto fail;
 
-        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_min));
+        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_min));
         if (status < 0)
                 goto fail;
 
         if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
                 hour = t->tm_hour + 1;
                 if (hour > 12)
-                        hour = RTC_HR_PM | BIN2BCD(hour - 12);
+                        hour = RTC_HR_PM | bin2bcd(hour - 12);
                 else
-                        hour = BIN2BCD(hour);
+                        hour = bin2bcd(hour);
         } else
-                hour = BIN2BCD(t->tm_hour);
+                hour = bin2bcd(t->tm_hour);
         status = menelaus_write_reg(regnum++, hour);
         if (status < 0)
                 goto fail;
 
-        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mday));
+        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mday));
         if (status < 0)
                 goto fail;
 
-        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mon + 1));
+        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mon + 1));
         if (status < 0)
                 goto fail;
 
-        status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_year - 100));
+        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_year - 100));
         if (status < 0)
                 goto fail;
 
@@ -914,7 +914,7 @@ static int menelaus_read_time(struct device *dev, struct rtc_time *t)
         }
 
         menelaus_to_time(regs, t);
-        t->tm_wday = BCD2BIN(regs[6]);
+        t->tm_wday = bcd2bin(regs[6]);
 
         return 0;
 }
@@ -927,7 +927,7 @@ static int menelaus_set_time(struct device *dev, struct rtc_time *t)
         status = time_to_menelaus(t, MENELAUS_RTC_SEC);
         if (status < 0)
                 return status;
-        status = menelaus_write_reg(MENELAUS_RTC_WKDAY, BIN2BCD(t->tm_wday));
+        status = menelaus_write_reg(MENELAUS_RTC_WKDAY, bin2bcd(t->tm_wday));
         if (status < 0) {
                 dev_err(&the_menelaus->client->dev, "rtc write reg %02x "
                                 "err %d\n", MENELAUS_RTC_WKDAY, status);
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index cf02e8fceb42..acf8b9d5f575 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -456,14 +456,17 @@ static irqreturn_t tps65010_irq(int irq, void *_tps)
 
 /* offsets 0..3 == GPIO1..GPIO4
  * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
+ * offset 6 == vibrator motor driver
  */
 static void
 tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
         if (offset < 4)
                 tps65010_set_gpio_out_value(offset + 1, value);
-        else
+        else if (offset < 6)
                 tps65010_set_led(offset - 3, value ? ON : OFF);
+        else
+                tps65010_set_vib(value);
 }
 
 static int
@@ -477,8 +480,10 @@ tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
                 if (!(tps->outmask & (1 << offset)))
                         return -EINVAL;
                 tps65010_set_gpio_out_value(offset + 1, value);
-        } else
+        } else if (offset < 6)
                 tps65010_set_led(offset - 3, value ? ON : OFF);
+        else
+                tps65010_set_vib(value);
 
         return 0;
 }
@@ -646,7 +651,7 @@ static int tps65010_probe(struct i2c_client *client,
                 tps->chip.get = tps65010_gpio_get;
 
                 tps->chip.base = board->base;
-                tps->chip.ngpio = 6;
+                tps->chip.ngpio = 7;
                 tps->chip.can_sleep = 1;
 
                 status = gpiochip_add(&tps->chip);
@@ -675,6 +680,7 @@ static const struct i2c_device_id tps65010_id[] = {
         { "tps65011", TPS65011 },
         { "tps65012", TPS65012 },
         { "tps65013", TPS65013 },
+        { "tps65014", TPS65011 },       /* tps65011 charging at 6.5V max */
         { }
 };
 MODULE_DEVICE_TABLE(i2c, tps65010_id);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index b346a687ab59..5a485c22660a 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -266,6 +266,9 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 
         client->dev.platform_data = info->platform_data;
 
+        if (info->archdata)
+                client->dev.archdata = *info->archdata;
+
         client->flags = info->flags;
         client->addr = info->addr;
         client->irq = info->irq;
@@ -437,6 +440,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 {
         int res = 0, dummy;
 
+        /* Can't register until after driver model init */
+        if (unlikely(WARN_ON(!i2c_bus_type.p)))
+                return -EAGAIN;
+
         mutex_init(&adap->bus_lock);
         mutex_init(&adap->clist_lock);
         INIT_LIST_HEAD(&adap->clients);
@@ -696,6 +703,10 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
 {
         int res;
 
+        /* Can't register until after driver model init */
+        if (unlikely(WARN_ON(!i2c_bus_type.p)))
+                return -EAGAIN;
+
         /* new style driver methods can't mix with legacy ones */
         if (is_newstyle_driver(driver)) {
                 if (driver->attach_adapter || driver->detach_adapter
@@ -978,7 +989,10 @@ static void __exit i2c_exit(void)
         bus_unregister(&i2c_bus_type);
 }
 
-subsys_initcall(i2c_init);
+/* We must initialize early, because some subsystems register i2c drivers
+ * in subsys_initcall() code, but are linked (and initialized) before i2c.
+ */
+postcore_initcall(i2c_init);
 module_exit(i2c_exit);
 
 /* ----------------------------------------------------
@@ -1677,6 +1691,28 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
 EXPORT_SYMBOL(i2c_smbus_write_word_data);
 
 /**
+ * i2c_smbus_process_call - SMBus "process call" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: 16-bit "word" being written
+ *
+ * This executes the SMBus "process call" protocol, returning negative errno
+ * else a 16-bit unsigned "word" received from the device.
+ */
+s32 i2c_smbus_process_call(struct i2c_client *client, u8 command, u16 value)
+{
+        union i2c_smbus_data data;
+        int status;
+        data.word = value;
+
+        status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+                                I2C_SMBUS_WRITE, command,
+                                I2C_SMBUS_PROC_CALL, &data);
+        return (status < 0) ? status : data.word;
+}
+EXPORT_SYMBOL(i2c_smbus_process_call);
+
+/**
  * i2c_smbus_read_block_data - SMBus "block read" protocol
  * @client: Handle to slave device
  * @command: Byte interpreted by slave
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 307d976c9b69..c171988a9f51 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -521,9 +521,9 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap)
                 return PTR_ERR(i2c_dev);
 
         /* register this i2c device with the driver core */
-        i2c_dev->dev = device_create_drvdata(i2c_dev_class, &adap->dev,
-                                             MKDEV(I2C_MAJOR, adap->nr),
-                                             NULL, "i2c-%d", adap->nr);
+        i2c_dev->dev = device_create(i2c_dev_class, &adap->dev,
+                                     MKDEV(I2C_MAJOR, adap->nr), NULL,
+                                     "i2c-%d", adap->nr);
         if (IS_ERR(i2c_dev->dev)) {
                 res = PTR_ERR(i2c_dev->dev);
                 goto error;