i2c: nomadik: use pinctrl PM helpers

This utilize the new pinctrl core PM helpers to transition
the driver to "sleep" and "idle" states, cutting away some
boilerplate code.

Cc: Hebbar Gururaja <gururaja.hebbar@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 10 insertions, 80 deletions

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 650293ff4d62..c7e3b0c1a1ca 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -148,10 +148,6 @@ struct i2c_nmk_client {
  * @stop: stop condition.
  * @xfer_complete: acknowledge completion for a I2C message.
  * @result: controller propogated result.
- * @pinctrl: pinctrl handle.
- * @pins_default: default state for the pins.
- * @pins_idle: idle state for the pins.
- * @pins_sleep: sleep state for the pins.
  * @busy: Busy doing transfer.
  */
 struct nmk_i2c_dev {
@@ -165,11 +161,6 @@ struct nmk_i2c_dev {
         int                             stop;
         struct completion               xfer_complete;
         int                             result;
-        /* Three pin states - default, idle & sleep */
-        struct pinctrl                  *pinctrl;
-        struct pinctrl_state            *pins_default;
-        struct pinctrl_state            *pins_idle;
-        struct pinctrl_state            *pins_sleep;
         bool                            busy;
 };
 
@@ -645,13 +636,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
         }
 
         /* Optionaly enable pins to be muxed in and configured */
-        if (!IS_ERR(dev->pins_default)) {
-                status = pinctrl_select_state(dev->pinctrl,
-                                dev->pins_default);
-                if (status)
-                        dev_err(&dev->adev->dev,
-                                "could not set default pins\n");
-        }
+        pinctrl_pm_select_default_state(&dev->adev->dev);
 
         status = init_hw(dev);
         if (status)
@@ -681,13 +666,7 @@ out:
         clk_disable_unprepare(dev->clk);
 out_clk:
         /* Optionally let pins go into idle state */
-        if (!IS_ERR(dev->pins_idle)) {
-                status = pinctrl_select_state(dev->pinctrl,
-                                dev->pins_idle);
-                if (status)
-                        dev_err(&dev->adev->dev,
-                                "could not set pins to idle state\n");
-        }
+        pinctrl_pm_select_idle_state(&dev->adev->dev);
 
         pm_runtime_put_sync(&dev->adev->dev);
 
@@ -882,41 +861,22 @@ static int nmk_i2c_suspend(struct device *dev)
 {
         struct amba_device *adev = to_amba_device(dev);
         struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-        int ret;
 
         if (nmk_i2c->busy)
                 return -EBUSY;
 
-        if (!IS_ERR(nmk_i2c->pins_sleep)) {
-                ret = pinctrl_select_state(nmk_i2c->pinctrl,
-                                nmk_i2c->pins_sleep);
-                if (ret)
-                        dev_err(dev, "could not set pins to sleep state\n");
-        }
+        pinctrl_pm_select_sleep_state(dev);
 
         return 0;
 }
 
 static int nmk_i2c_resume(struct device *dev)
 {
-        struct amba_device *adev = to_amba_device(dev);
-        struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-        int ret;
-
         /* First go to the default state */
-        if (!IS_ERR(nmk_i2c->pins_default)) {
-                ret = pinctrl_select_state(nmk_i2c->pinctrl,
-                                nmk_i2c->pins_default);
-                if (ret)
-                        dev_err(dev, "could not set pins to default state\n");
-        }
+        pinctrl_pm_select_default_state(dev);
         /* Then let's idle the pins until the next transfer happens */
-        if (!IS_ERR(nmk_i2c->pins_idle)) {
-                ret = pinctrl_select_state(nmk_i2c->pinctrl,
-                                nmk_i2c->pins_idle);
-                if (ret)
-                        dev_err(dev, "could not set pins to idle state\n");
-        }
+        pinctrl_pm_select_idle_state(dev);
+
         return 0;
 }
 #else
@@ -1004,39 +964,10 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
         dev->adev = adev;
         amba_set_drvdata(adev, dev);
 
-        dev->pinctrl = devm_pinctrl_get(&adev->dev);
-        if (IS_ERR(dev->pinctrl)) {
-                ret = PTR_ERR(dev->pinctrl);
-                goto err_pinctrl;
-        }
-
-        dev->pins_default = pinctrl_lookup_state(dev->pinctrl,
-                                                 PINCTRL_STATE_DEFAULT);
-        if (IS_ERR(dev->pins_default)) {
-                dev_err(&adev->dev, "could not get default pinstate\n");
-        } else {
-                ret = pinctrl_select_state(dev->pinctrl,
-                                           dev->pins_default);
-                if (ret)
-                        dev_dbg(&adev->dev, "could not set default pinstate\n");
-        }
-
-        dev->pins_idle = pinctrl_lookup_state(dev->pinctrl,
-                                              PINCTRL_STATE_IDLE);
-        if (IS_ERR(dev->pins_idle)) {
-                dev_dbg(&adev->dev, "could not get idle pinstate\n");
-        } else {
-                /* If possible, let's go to idle until the first transfer */
-                ret = pinctrl_select_state(dev->pinctrl,
-                                           dev->pins_idle);
-                if (ret)
-                        dev_dbg(&adev->dev, "could not set idle pinstate\n");
-        }
-
-        dev->pins_sleep = pinctrl_lookup_state(dev->pinctrl,
-                                               PINCTRL_STATE_SLEEP);
-        if (IS_ERR(dev->pins_sleep))
-                dev_dbg(&adev->dev, "could not get sleep pinstate\n");
+        /* Select default pin state */
+        pinctrl_pm_select_default_state(&adev->dev);
+        /* If possible, let's go to idle until the first transfer */
+        pinctrl_pm_select_idle_state(&adev->dev);
 
         dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
         if (!dev->virtbase) {
@@ -1106,7 +1037,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
         iounmap(dev->virtbase);
  err_no_ioremap:
         kfree(dev);
- err_pinctrl:
  err_no_mem:
 
         return ret;