Merge branch 'master' into for-next

Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.

7 files changed, 205 insertions, 161 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index b923074b2cbe..30f06e956bfb 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -75,8 +75,7 @@ config I2C_HELPER_AUTO
           In doubt, say Y.
 
 config I2C_SMBUS
-        tristate
-        prompt "SMBus-specific protocols" if !I2C_HELPER_AUTO
+        tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
         help
           Say Y here if you want support for SMBus extensions to the I2C
           specification. At the moment, the only supported extension is
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 3998dd620a03..f1cfe7e5508b 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menu "I2C Algorithms"
-        depends on !I2C_HELPER_AUTO
+        visible if !I2C_HELPER_AUTO
 
 config I2C_ALGOBIT
         tristate "I2C bit-banging interfaces"
@@ -15,15 +15,3 @@ config I2C_ALGOPCA
         tristate "I2C PCA 9564 interfaces"
 
 endmenu
-
-# In automatic configuration mode, we still have to define the
-# symbols to avoid unmet dependencies.
-
-if I2C_HELPER_AUTO
-config I2C_ALGOBIT
-        tristate
-config I2C_ALGOPCF
-        tristate
-config I2C_ALGOPCA
-        tristate
-endif
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c950be3cce21..3a6321cb8030 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -99,6 +99,7 @@ config I2C_I801
             ICH10
             5/3400 Series (PCH)
             Cougar Point (PCH)
+            Patsburg (PCH)
 
           This driver can also be built as a module.  If so, the module
           will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 59d65981eed7..02835ce7ff4b 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -3,6 +3,8 @@
     Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
     <mdsxyz123@yahoo.com>
     Copyright (C) 2007, 2008   Jean Delvare <khali@linux-fr.org>
+    Copyright (C) 2010         Intel Corporation,
+                               David Woodhouse <dwmw2@infradead.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -43,6 +45,10 @@
   ICH10                 0x3a60     32     hard     yes     yes     yes
   5/3400 Series (PCH)   0x3b30     32     hard     yes     yes     yes
   Cougar Point (PCH)    0x1c22     32     hard     yes     yes     yes
+  Patsburg (PCH)        0x1d22     32     hard     yes     yes     yes
+  Patsburg (PCH) IDF    0x1d70     32     hard     yes     yes     yes
+  Patsburg (PCH) IDF    0x1d71     32     hard     yes     yes     yes
+  Patsburg (PCH) IDF    0x1d72     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -50,12 +56,11 @@
   Block buffer                     yes
   Block process call transaction   no
   I2C block read transaction       yes  (doesn't use the block buffer)
+  Slave mode                       no
 
   See the file Documentation/i2c/busses/i2c-i801 for details.
 */
 
-/* Note: we assume there can only be one I801, with one SMBus interface */
-
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
@@ -69,16 +74,16 @@
 #include <linux/dmi.h>
 
 /* I801 SMBus address offsets */
-#define SMBHSTSTS       (0 + i801_smba)
-#define SMBHSTCNT       (2 + i801_smba)
-#define SMBHSTCMD       (3 + i801_smba)
-#define SMBHSTADD       (4 + i801_smba)
-#define SMBHSTDAT0      (5 + i801_smba)
-#define SMBHSTDAT1      (6 + i801_smba)
-#define SMBBLKDAT       (7 + i801_smba)
-#define SMBPEC          (8 + i801_smba)         /* ICH3 and later */
-#define SMBAUXSTS       (12 + i801_smba)        /* ICH4 and later */
-#define SMBAUXCTL       (13 + i801_smba)        /* ICH4 and later */
+#define SMBHSTSTS(p)    (0 + (p)->smba)
+#define SMBHSTCNT(p)    (2 + (p)->smba)
+#define SMBHSTCMD(p)    (3 + (p)->smba)
+#define SMBHSTADD(p)    (4 + (p)->smba)
+#define SMBHSTDAT0(p)   (5 + (p)->smba)
+#define SMBHSTDAT1(p)   (6 + (p)->smba)
+#define SMBBLKDAT(p)    (7 + (p)->smba)
+#define SMBPEC(p)       (8 + (p)->smba)         /* ICH3 and later */
+#define SMBAUXSTS(p)    (12 + (p)->smba)        /* ICH4 and later */
+#define SMBAUXCTL(p)    (13 + (p)->smba)        /* ICH4 and later */
 
 /* PCI Address Constants */
 #define SMBBAR          4
@@ -127,16 +132,25 @@
                                  SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
                                  SMBHSTSTS_INTR)
 
-static unsigned long i801_smba;
-static unsigned char i801_original_hstcfg;
+/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+
+struct i801_priv {
+        struct i2c_adapter adapter;
+        unsigned long smba;
+        unsigned char original_hstcfg;
+        struct pci_dev *pci_dev;
+        unsigned int features;
+};
+
 static struct pci_driver i801_driver;
-static struct pci_dev *I801_dev;
 
 #define FEATURE_SMBUS_PEC       (1 << 0)
 #define FEATURE_BLOCK_BUFFER    (1 << 1)
 #define FEATURE_BLOCK_PROC      (1 << 2)
 #define FEATURE_I2C_BLOCK_READ  (1 << 3)
-static unsigned int i801_features;
 
 static const char *i801_feature_names[] = {
         "SMBus PEC",
@@ -151,24 +165,24 @@ MODULE_PARM_DESC(disable_features, "Disable selected driver features");
 
 /* Make sure the SMBus host is ready to start transmitting.
    Return 0 if it is, -EBUSY if it is not. */
-static int i801_check_pre(void)
+static int i801_check_pre(struct i801_priv *priv)
 {
         int status;
 
-        status = inb_p(SMBHSTSTS);
+        status = inb_p(SMBHSTSTS(priv));
         if (status & SMBHSTSTS_HOST_BUSY) {
-                dev_err(&I801_dev->dev, "SMBus is busy, can't use it!\n");
+                dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n");
                 return -EBUSY;
         }
 
         status &= STATUS_FLAGS;
         if (status) {
-                dev_dbg(&I801_dev->dev, "Clearing status flags (%02x)\n",
+                dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n",
                         status);
-                outb_p(status, SMBHSTSTS);
-                status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+                outb_p(status, SMBHSTSTS(priv));
+                status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
                 if (status) {
-                        dev_err(&I801_dev->dev,
+                        dev_err(&priv->pci_dev->dev,
                                 "Failed clearing status flags (%02x)\n",
                                 status);
                         return -EBUSY;
@@ -179,48 +193,50 @@ static int i801_check_pre(void)
 }
 
 /* Convert the status register to an error code, and clear it. */
-static int i801_check_post(int status, int timeout)
+static int i801_check_post(struct i801_priv *priv, int status, int timeout)
 {
         int result = 0;
 
         /* If the SMBus is still busy, we give up */
         if (timeout) {
-                dev_err(&I801_dev->dev, "Transaction timeout\n");
+                dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
                 /* try to stop the current command */
-                dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
-                outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
+                dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
+                outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
+                       SMBHSTCNT(priv));
                 msleep(1);
-                outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
+                outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
+                       SMBHSTCNT(priv));
 
                 /* Check if it worked */
-                status = inb_p(SMBHSTSTS);
+                status = inb_p(SMBHSTSTS(priv));
                 if ((status & SMBHSTSTS_HOST_BUSY) ||
                     !(status & SMBHSTSTS_FAILED))
-                        dev_err(&I801_dev->dev,
+                        dev_err(&priv->pci_dev->dev,
                                 "Failed terminating the transaction\n");
-                outb_p(STATUS_FLAGS, SMBHSTSTS);
+                outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
                 return -ETIMEDOUT;
         }
 
         if (status & SMBHSTSTS_FAILED) {
                 result = -EIO;
-                dev_err(&I801_dev->dev, "Transaction failed\n");
+                dev_err(&priv->pci_dev->dev, "Transaction failed\n");
         }
         if (status & SMBHSTSTS_DEV_ERR) {
                 result = -ENXIO;
-                dev_dbg(&I801_dev->dev, "No response\n");
+                dev_dbg(&priv->pci_dev->dev, "No response\n");
         }
         if (status & SMBHSTSTS_BUS_ERR) {
                 result = -EAGAIN;
-                dev_dbg(&I801_dev->dev, "Lost arbitration\n");
+                dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
         }
 
         if (result) {
                 /* Clear error flags */
-                outb_p(status & STATUS_FLAGS, SMBHSTSTS);
-                status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+                outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
+                status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
                 if (status) {
-                        dev_warn(&I801_dev->dev, "Failed clearing status "
+                        dev_warn(&priv->pci_dev->dev, "Failed clearing status "
                                  "flags at end of transaction (%02x)\n",
                                  status);
                 }
@@ -229,86 +245,88 @@ static int i801_check_post(int status, int timeout)
         return result;
 }
 
-static int i801_transaction(int xact)
+static int i801_transaction(struct i801_priv *priv, int xact)
 {
         int status;
         int result;
         int timeout = 0;
 
-        result = i801_check_pre();
+        result = i801_check_pre(priv);
         if (result < 0)
                 return result;
 
         /* the current contents of SMBHSTCNT can be overwritten, since PEC,
          * INTREN, SMBSCMD are passed in xact */
-        outb_p(xact | I801_START, SMBHSTCNT);
+        outb_p(xact | I801_START, SMBHSTCNT(priv));
 
         /* We will always wait for a fraction of a second! */
         do {
                 msleep(1);
-                status = inb_p(SMBHSTSTS);
+                status = inb_p(SMBHSTSTS(priv));
         } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
 
-        result = i801_check_post(status, timeout > MAX_TIMEOUT);
+        result = i801_check_post(priv, status, timeout > MAX_TIMEOUT);
         if (result < 0)
                 return result;
 
-        outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+        outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
         return 0;
 }
 
 /* wait for INTR bit as advised by Intel */
-static void i801_wait_hwpec(void)
+static void i801_wait_hwpec(struct i801_priv *priv)
 {
         int timeout = 0;
         int status;
 
         do {
                 msleep(1);
-                status = inb_p(SMBHSTSTS);
+                status = inb_p(SMBHSTSTS(priv));
         } while ((!(status & SMBHSTSTS_INTR))
                  && (timeout++ < MAX_TIMEOUT));
 
         if (timeout > MAX_TIMEOUT)
-                dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+                dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n");
 
-        outb_p(status, SMBHSTSTS);
+        outb_p(status, SMBHSTSTS(priv));
 }
 
-static int i801_block_transaction_by_block(union i2c_smbus_data *data,
+static int i801_block_transaction_by_block(struct i801_priv *priv,
+                                           union i2c_smbus_data *data,
                                            char read_write, int hwpec)
 {
         int i, len;
         int status;
 
-        inb_p(SMBHSTCNT); /* reset the data buffer index */
+        inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
 
         /* Use 32-byte buffer to process this transaction */
         if (read_write == I2C_SMBUS_WRITE) {
                 len = data->block[0];
-                outb_p(len, SMBHSTDAT0);
+                outb_p(len, SMBHSTDAT0(priv));
                 for (i = 0; i < len; i++)
-                        outb_p(data->block[i+1], SMBBLKDAT);
+                        outb_p(data->block[i+1], SMBBLKDAT(priv));
         }
 
-        status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+        status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 |
                                   I801_PEC_EN * hwpec);
         if (status)
                 return status;
 
         if (read_write == I2C_SMBUS_READ) {
-                len = inb_p(SMBHSTDAT0);
+                len = inb_p(SMBHSTDAT0(priv));
                 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
                         return -EPROTO;
 
                 data->block[0] = len;
                 for (i = 0; i < len; i++)
-                        data->block[i + 1] = inb_p(SMBBLKDAT);
+                        data->block[i + 1] = inb_p(SMBBLKDAT(priv));
         }
         return 0;
 }
 
-static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
+static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
+                                               union i2c_smbus_data *data,
                                                char read_write, int command,
                                                int hwpec)
 {
@@ -318,15 +336,15 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
         int result;
         int timeout;
 
-        result = i801_check_pre();
+        result = i801_check_pre(priv);
         if (result < 0)
                 return result;
 
         len = data->block[0];
 
         if (read_write == I2C_SMBUS_WRITE) {
-                outb_p(len, SMBHSTDAT0);
-                outb_p(data->block[1], SMBBLKDAT);
+                outb_p(len, SMBHSTDAT0(priv));
+                outb_p(data->block[1], SMBBLKDAT(priv));
         }
 
         for (i = 1; i <= len; i++) {
@@ -342,34 +360,37 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
                         else
                                 smbcmd = I801_BLOCK_DATA;
                 }
-                outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
+                outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
 
                 if (i == 1)
-                        outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+                        outb_p(inb(SMBHSTCNT(priv)) | I801_START,
+                               SMBHSTCNT(priv));
 
                 /* We will always wait for a fraction of a second! */
                 timeout = 0;
                 do {
                         msleep(1);
-                        status = inb_p(SMBHSTSTS);
+                        status = inb_p(SMBHSTSTS(priv));
                 } while ((!(status & SMBHSTSTS_BYTE_DONE))
                          && (timeout++ < MAX_TIMEOUT));
 
-                result = i801_check_post(status, timeout > MAX_TIMEOUT);
+                result = i801_check_post(priv, status, timeout > MAX_TIMEOUT);
                 if (result < 0)
                         return result;
 
                 if (i == 1 && read_write == I2C_SMBUS_READ
                  && command != I2C_SMBUS_I2C_BLOCK_DATA) {
-                        len = inb_p(SMBHSTDAT0);
+                        len = inb_p(SMBHSTDAT0(priv));
                         if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
-                                dev_err(&I801_dev->dev,
+                                dev_err(&priv->pci_dev->dev,
                                         "Illegal SMBus block read size %d\n",
                                         len);
                                 /* Recover */
-                                while (inb_p(SMBHSTSTS) & SMBHSTSTS_HOST_BUSY)
-                                        outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS);
-                                outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+                                while (inb_p(SMBHSTSTS(priv)) &
+                                       SMBHSTSTS_HOST_BUSY)
+                                        outb_p(SMBHSTSTS_BYTE_DONE,
+                                               SMBHSTSTS(priv));
+                                outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
                                 return -EPROTO;
                         }
                         data->block[0] = len;
@@ -377,27 +398,28 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
 
                 /* Retrieve/store value in SMBBLKDAT */
                 if (read_write == I2C_SMBUS_READ)
-                        data->block[i] = inb_p(SMBBLKDAT);
+                        data->block[i] = inb_p(SMBBLKDAT(priv));
                 if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
-                        outb_p(data->block[i+1], SMBBLKDAT);
+                        outb_p(data->block[i+1], SMBBLKDAT(priv));
 
                 /* signals SMBBLKDAT ready */
-                outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS);
+                outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
         }
 
         return 0;
 }
 
-static int i801_set_block_buffer_mode(void)
+static int i801_set_block_buffer_mode(struct i801_priv *priv)
 {
-        outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
-        if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
+        outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+        if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
                 return -EIO;
         return 0;
 }
 
 /* Block transaction function */
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+static int i801_block_transaction(struct i801_priv *priv,
+                                  union i2c_smbus_data *data, char read_write,
                                   int command, int hwpec)
 {
         int result = 0;
@@ -406,11 +428,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
         if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
                 if (read_write == I2C_SMBUS_WRITE) {
                         /* set I2C_EN bit in configuration register */
-                        pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
-                        pci_write_config_byte(I801_dev, SMBHSTCFG,
+                        pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+                        pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
                                               hostc | SMBHSTCFG_I2C_EN);
-                } else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
-                        dev_err(&I801_dev->dev,
+                } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+                        dev_err(&priv->pci_dev->dev,
                                 "I2C block read is unsupported!\n");
                         return -EOPNOTSUPP;
                 }
@@ -429,22 +451,23 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
         /* Experience has shown that the block buffer can only be used for
            SMBus (not I2C) block transactions, even though the datasheet
            doesn't mention this limitation. */
-        if ((i801_features & FEATURE_BLOCK_BUFFER)
+        if ((priv->features & FEATURE_BLOCK_BUFFER)
          && command != I2C_SMBUS_I2C_BLOCK_DATA
-         && i801_set_block_buffer_mode() == 0)
-                result = i801_block_transaction_by_block(data, read_write,
-                                                         hwpec);
+         && i801_set_block_buffer_mode(priv) == 0)
+                result = i801_block_transaction_by_block(priv, data,
+                                                         read_write, hwpec);
         else
-                result = i801_block_transaction_byte_by_byte(data, read_write,
+                result = i801_block_transaction_byte_by_byte(priv, data,
+                                                             read_write,
                                                              command, hwpec);
 
         if (result == 0 && hwpec)
-                i801_wait_hwpec();
+                i801_wait_hwpec(priv);
 
         if (command == I2C_SMBUS_I2C_BLOCK_DATA
          && read_write == I2C_SMBUS_WRITE) {
                 /* restore saved configuration register value */
-                pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
+                pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
         }
         return result;
 }
@@ -457,81 +480,85 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
         int hwpec;
         int block = 0;
         int ret, xact = 0;
+        struct i801_priv *priv = i2c_get_adapdata(adap);
 
-        hwpec = (i801_features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
+        hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
                 && size != I2C_SMBUS_QUICK
                 && size != I2C_SMBUS_I2C_BLOCK_DATA;
 
         switch (size) {
         case I2C_SMBUS_QUICK:
                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-                       SMBHSTADD);
+                       SMBHSTADD(priv));
                 xact = I801_QUICK;
                 break;
         case I2C_SMBUS_BYTE:
                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-                       SMBHSTADD);
+                       SMBHSTADD(priv));
                 if (read_write == I2C_SMBUS_WRITE)
-                        outb_p(command, SMBHSTCMD);
+                        outb_p(command, SMBHSTCMD(priv));
                 xact = I801_BYTE;
                 break;
         case I2C_SMBUS_BYTE_DATA:
                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-                       SMBHSTADD);
-                outb_p(command, SMBHSTCMD);
+                       SMBHSTADD(priv));
+                outb_p(command, SMBHSTCMD(priv));
                 if (read_write == I2C_SMBUS_WRITE)
-                        outb_p(data->byte, SMBHSTDAT0);
+                        outb_p(data->byte, SMBHSTDAT0(priv));
                 xact = I801_BYTE_DATA;
                 break;
         case I2C_SMBUS_WORD_DATA:
                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-                       SMBHSTADD);
-                outb_p(command, SMBHSTCMD);
+                       SMBHSTADD(priv));
+                outb_p(command, SMBHSTCMD(priv));
                 if (read_write == I2C_SMBUS_WRITE) {
-                        outb_p(data->word & 0xff, SMBHSTDAT0);
-                        outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+                        outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+                        outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
                 }
                 xact = I801_WORD_DATA;
                 break;
         case I2C_SMBUS_BLOCK_DATA:
                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
-                       SMBHSTADD);
-                outb_p(command, SMBHSTCMD);
+                       SMBHSTADD(priv));
+                outb_p(command, SMBHSTCMD(priv));
                 block = 1;
                 break;
         case I2C_SMBUS_I2C_BLOCK_DATA:
                 /* NB: page 240 of ICH5 datasheet shows that the R/#W
                  * bit should be cleared here, even when reading */
-                outb_p((addr & 0x7f) << 1, SMBHSTADD);
+                outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
                 if (read_write == I2C_SMBUS_READ) {
                         /* NB: page 240 of ICH5 datasheet also shows
                          * that DATA1 is the cmd field when reading */
-                        outb_p(command, SMBHSTDAT1);
+                        outb_p(command, SMBHSTDAT1(priv));
                 } else
-                        outb_p(command, SMBHSTCMD);
+                        outb_p(command, SMBHSTCMD(priv));
                 block = 1;
                 break;
         default:
-                dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
+                dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
+                        size);
                 return -EOPNOTSUPP;
         }
 
         if (hwpec)      /* enable/disable hardware PEC */
-                outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL);
+                outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
         else
-                outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
+                outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
+                       SMBAUXCTL(priv));
 
         if (block)
-                ret = i801_block_transaction(data, read_write, size, hwpec);
+                ret = i801_block_transaction(priv, data, read_write, size,
+                                             hwpec);
         else
-                ret = i801_transaction(xact | ENABLE_INT9);
+                ret = i801_transaction(priv, xact | ENABLE_INT9);
 
         /* Some BIOSes don't like it when PEC is enabled at reboot or resume
            time, so we forcibly disable it after every transaction. Turn off
            E32B for the same reason. */
         if (hwpec || block)
-                outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
-                       SMBAUXCTL);
+                outb_p(inb_p(SMBAUXCTL(priv)) &
+                       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
 
         if (block)
                 return ret;
@@ -543,10 +570,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
         switch (xact & 0x7f) {
         case I801_BYTE: /* Result put in SMBHSTDAT0 */
         case I801_BYTE_DATA:
-                data->byte = inb_p(SMBHSTDAT0);
+                data->byte = inb_p(SMBHSTDAT0(priv));
                 break;
         case I801_WORD_DATA:
-                data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+                data->word = inb_p(SMBHSTDAT0(priv)) +
+                             (inb_p(SMBHSTDAT1(priv)) << 8);
                 break;
         }
         return 0;
@@ -555,11 +583,13 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 
 static u32 i801_func(struct i2c_adapter *adapter)
 {
+        struct i801_priv *priv = i2c_get_adapdata(adapter);
+
         return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
                I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
                I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
-               ((i801_features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
-               ((i801_features & FEATURE_I2C_BLOCK_READ) ?
+               ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+               ((priv->features & FEATURE_I2C_BLOCK_READ) ?
                 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
 }
 
@@ -568,12 +598,6 @@ static const struct i2c_algorithm smbus_algorithm = {
         .functionality  = i801_func,
 };
 
-static struct i2c_adapter i801_adapter = {
-        .owner          = THIS_MODULE,
-        .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
-        .algo           = &smbus_algorithm,
-};
-
 static const struct pci_device_id i801_ids[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
@@ -592,6 +616,10 @@ static const struct pci_device_id i801_ids[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) },
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) },
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) },
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
         { 0, }
 };
 
@@ -704,16 +732,25 @@ static int __devinit i801_probe(struct pci_dev *dev,
 {
         unsigned char temp;
         int err, i;
+        struct i801_priv *priv;
+
+        priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+        if (!priv)
+                return -ENOMEM;
+
+        i2c_set_adapdata(&priv->adapter, priv);
+        priv->adapter.owner = THIS_MODULE;
+        priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+        priv->adapter.algo = &smbus_algorithm;
 
-        I801_dev = dev;
-        i801_features = 0;
+        priv->pci_dev = dev;
         switch (dev->device) {
         default:
-                i801_features |= FEATURE_I2C_BLOCK_READ;
+                priv->features |= FEATURE_I2C_BLOCK_READ;
                 /* fall through */
         case PCI_DEVICE_ID_INTEL_82801DB_3:
-                i801_features |= FEATURE_SMBUS_PEC;
-                i801_features |= FEATURE_BLOCK_BUFFER;
+                priv->features |= FEATURE_SMBUS_PEC;
+                priv->features |= FEATURE_BLOCK_BUFFER;
                 /* fall through */
         case PCI_DEVICE_ID_INTEL_82801CA_3:
         case PCI_DEVICE_ID_INTEL_82801BA_2:
@@ -724,11 +761,11 @@ static int __devinit i801_probe(struct pci_dev *dev,
 
         /* Disable features on user request */
         for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
-                if (i801_features & disable_features & (1 << i))
+                if (priv->features & disable_features & (1 << i))
                         dev_notice(&dev->dev, "%s disabled by user\n",
                                    i801_feature_names[i]);
         }
-        i801_features &= ~disable_features;
+        priv->features &= ~disable_features;
 
         err = pci_enable_device(dev);
         if (err) {
@@ -738,8 +775,8 @@ static int __devinit i801_probe(struct pci_dev *dev,
         }
 
         /* Determine the address of the SMBus area */
-        i801_smba = pci_resource_start(dev, SMBBAR);
-        if (!i801_smba) {
+        priv->smba = pci_resource_start(dev, SMBBAR);
+        if (!priv->smba) {
                 dev_err(&dev->dev, "SMBus base address uninitialized, "
                         "upgrade BIOS\n");
                 err = -ENODEV;
@@ -755,19 +792,19 @@ static int __devinit i801_probe(struct pci_dev *dev,
         err = pci_request_region(dev, SMBBAR, i801_driver.name);
         if (err) {
                 dev_err(&dev->dev, "Failed to request SMBus region "
-                        "0x%lx-0x%Lx\n", i801_smba,
+                        "0x%lx-0x%Lx\n", priv->smba,
                         (unsigned long long)pci_resource_end(dev, SMBBAR));
                 goto exit;
         }
 
-        pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
-        i801_original_hstcfg = temp;
+        pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
+        priv->original_hstcfg = temp;
         temp &= ~SMBHSTCFG_I2C_EN;      /* SMBus timing */
         if (!(temp & SMBHSTCFG_HST_EN)) {
                 dev_info(&dev->dev, "Enabling SMBus device\n");
                 temp |= SMBHSTCFG_HST_EN;
         }
-        pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
+        pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
 
         if (temp & SMBHSTCFG_SMB_SMI_EN)
                 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
@@ -775,19 +812,19 @@ static int __devinit i801_probe(struct pci_dev *dev,
                 dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
 
         /* Clear special mode bits */
-        if (i801_features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
-                outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
-                       SMBAUXCTL);
+        if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+                outb_p(inb_p(SMBAUXCTL(priv)) &
+                       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
 
         /* set up the sysfs linkage to our parent device */
-        i801_adapter.dev.parent = &dev->dev;
+        priv->adapter.dev.parent = &dev->dev;
 
         /* Retry up to 3 times on lost arbitration */
-        i801_adapter.retries = 3;
+        priv->adapter.retries = 3;
 
-        snprintf(i801_adapter.name, sizeof(i801_adapter.name),
-                "SMBus I801 adapter at %04lx", i801_smba);
-        err = i2c_add_adapter(&i801_adapter);
+        snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+                "SMBus I801 adapter at %04lx", priv->smba);
+        err = i2c_add_adapter(&priv->adapter);
         if (err) {
                 dev_err(&dev->dev, "Failed to add SMBus adapter\n");
                 goto exit_release;
@@ -801,27 +838,33 @@ static int __devinit i801_probe(struct pci_dev *dev,
                 memset(&info, 0, sizeof(struct i2c_board_info));
                 info.addr = apanel_addr;
                 strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
-                i2c_new_device(&i801_adapter, &info);
+                i2c_new_device(&priv->adapter, &info);
         }
 #endif
 #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
         if (dmi_name_in_vendors("FUJITSU"))
-                dmi_walk(dmi_check_onboard_devices, &i801_adapter);
+                dmi_walk(dmi_check_onboard_devices, &priv->adapter);
 #endif
 
+        pci_set_drvdata(dev, priv);
         return 0;
 
 exit_release:
         pci_release_region(dev, SMBBAR);
 exit:
+        kfree(priv);
         return err;
 }
 
 static void __devexit i801_remove(struct pci_dev *dev)
 {
-        i2c_del_adapter(&i801_adapter);
-        pci_write_config_byte(I801_dev, SMBHSTCFG, i801_original_hstcfg);
+        struct i801_priv *priv = pci_get_drvdata(dev);
+
+        i2c_del_adapter(&priv->adapter);
+        pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
         pci_release_region(dev, SMBBAR);
+        pci_set_drvdata(dev, NULL);
+        kfree(priv);
         /*
          * do not call pci_disable_device(dev) since it can cause hard hangs on
          * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
@@ -831,8 +874,10 @@ static void __devexit i801_remove(struct pci_dev *dev)
 #ifdef CONFIG_PM
 static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
 {
+        struct i801_priv *priv = pci_get_drvdata(dev);
+
         pci_save_state(dev);
-        pci_write_config_byte(dev, SMBHSTCFG, i801_original_hstcfg);
+        pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
         pci_set_power_state(dev, pci_choose_state(dev, mesg));
         return 0;
 }
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
index 80f70d3a744d..c71492782bbd 100644
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ b/drivers/i2c/busses/i2c-intel-mid.c
@@ -999,7 +999,7 @@ static int __devinit intel_mid_i2c_probe(struct pci_dev *dev,
 
         /* Initialize struct members */
         snprintf(mrst->adap.name, sizeof(mrst->adap.name),
-                "MRST/Medfield I2C at %lx", start);
+                "Intel MID I2C at %lx", start);
         mrst->adap.owner = THIS_MODULE;
         mrst->adap.algo = &intel_mid_i2c_algorithm;
         mrst->adap.dev.parent = &dev->dev;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index d231f683f576..6b4cc567645b 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -848,6 +848,18 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
                 goto out_list;
         }
 
+        /* Sanity checks */
+        if (unlikely(adap->name[0] == '\0')) {
+                pr_err("i2c-core: Attempt to register an adapter with "
+                       "no name!\n");
+                return -EINVAL;
+        }
+        if (unlikely(!adap->algo)) {
+                pr_err("i2c-core: Attempt to register adapter '%s' with "
+                       "no algo!\n", adap->name);
+                return -EINVAL;
+        }
+
         rt_mutex_init(&adap->bus_lock);
         mutex_init(&adap->userspace_clients_lock);
         INIT_LIST_HEAD(&adap->userspace_clients);
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index d32a4843fc3a..d7a4833be416 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -120,7 +120,6 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
         snprintf(priv->adap.name, sizeof(priv->adap.name),
                  "i2c-%d-mux (chan_id %d)", i2c_adapter_id(parent), chan_id);
         priv->adap.owner = THIS_MODULE;
-        priv->adap.id = parent->id;
         priv->adap.algo = &priv->algo;
         priv->adap.algo_data = priv;
         priv->adap.dev.parent = &parent->dev;