[PATCH] I2C: minor TPS6501x cleanups

This includes various small cleanups and fixes to the TPS 6501x driver that
came mostly from review feedback by Jean Delvare; thanks Jean!  Also some
goofy whitespace gets fixed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 28 insertions, 32 deletions

diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index a0982da09803..b28964b08006 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -509,7 +509,6 @@ config TPS65010
           This driver can also be built as a module.  If so, the module
           will be called tps65010.
 
-
 config SENSORS_M41T00
         tristate "ST M41T00 RTC chip"
         depends on I2C && PPC32
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index c0ac01b60039..280e9638c0f8 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -18,7 +18,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#undef  DEBUG
 
 #include <linux/config.h>
 #include <linux/kernel.h>
@@ -49,11 +48,7 @@
 MODULE_DESCRIPTION("TPS6501x Power Management Driver");
 MODULE_LICENSE("GPL");
 
-/* only two addresses possible */
-#define TPS_BASE        0x48
-static unsigned short normal_i2c[] = {
-        TPS_BASE,
-        I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x48, /* 0x49, */ I2C_CLIENT_END };
 static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
 
 I2C_CLIENT_INSMOD;
@@ -102,7 +97,7 @@ struct tps65010 {
         u8                      chgstatus, regstatus, chgconf;
         u8                      nmask1, nmask2;
 
-        /* plus four GPIOs, probably used to switch power */
+        /* not currently tracking GPIO state */
 };
 
 #define POWER_POLL_DELAY        msecs_to_jiffies(800)
@@ -135,7 +130,7 @@ static void dbg_regstat(char *buf, size_t len, u8 regstatus)
                 (regstatus & TPS_REG_COVER) ? " uncover" : "",
                 (regstatus & TPS_REG_UVLO) ? " UVLO" : "",
                 (regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
-                (regstatus & TPS_REG_PG_LD02) ? " ld01_bad" : "",
+                (regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "",
                 (regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
                 (regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
                 (regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
@@ -143,7 +138,7 @@ static void dbg_regstat(char *buf, size_t len, u8 regstatus)
 
 static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
 {
-        char *hibit;
+        const char *hibit;
 
         if (por)
                 hibit = (chgconfig & TPS_CHARGE_POR)
@@ -295,7 +290,7 @@ static int dbg_show(struct seq_file *s, void *_)
         seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
 
         for (i = 0; i < 4; i++) {
-                if (value & (1 << (4 +i)))
+                if (value & (1 << (4 + i)))
                         seq_printf(s, "  gpio%d-out %s\n", i + 1,
                                 (value & (1 << i)) ? "low" : "hi ");
                 else
@@ -481,7 +476,7 @@ static int __exit tps65010_detach_client(struct i2c_client *client)
         debugfs_remove(tps->file);
         if (i2c_detach_client(client) == 0)
                 kfree(tps);
-        the_tps = 0;
+        the_tps = NULL;
         return 0;
 }
 
@@ -514,7 +509,6 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
         INIT_WORK(&tps->work, tps65010_work, tps);
         tps->irq = -1;
         tps->client.addr = address;
-        i2c_set_clientdata(&tps->client, tps);
         tps->client.adapter = bus;
         tps->client.driver = &tps65010_driver;
         strlcpy(tps->client.name, DRIVER_NAME, I2C_NAME_SIZE);
@@ -523,9 +517,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
         if (status < 0) {
                 dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
                                 DRIVER_NAME, address, status);
-fail1:
-                kfree(tps);
-                return 0;
+                goto fail1;
         }
 
 #ifdef  CONFIG_ARM
@@ -535,7 +527,7 @@ fail1:
                 tps->irq = OMAP_GPIO_IRQ(58);
                 omap_request_gpio(58);
                 omap_set_gpio_direction(58, 1);
-                omap_set_gpio_edge_ctrl(58, OMAP_GPIO_FALLING_EDGE);
+                set_irq_type(tps->irq, IRQT_FALLING);
         }
         if (machine_is_omap_osk()) {
                 tps->model = TPS65010;
@@ -543,7 +535,7 @@ fail1:
                 tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1));
                 omap_request_gpio(OMAP_MPUIO(1));
                 omap_set_gpio_direction(OMAP_MPUIO(1), 1);
-                omap_set_gpio_edge_ctrl(OMAP_MPUIO(1), OMAP_GPIO_FALLING_EDGE);
+                set_irq_type(tps->irq, IRQT_FALLING);
         }
         if (machine_is_omap_h3()) {
                 tps->model = TPS65013;
@@ -633,6 +625,9 @@ fail1:
         tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
                                 tps, DEBUG_FOPS);
         return 0;
+fail1:
+        kfree(tps);
+        return 0;
 }
 
 static int __init tps65010_scan_bus(struct i2c_adapter *bus)
@@ -645,7 +640,6 @@ static int __init tps65010_scan_bus(struct i2c_adapter *bus)
 static struct i2c_driver tps65010_driver = {
         .owner          = THIS_MODULE,
         .name           = "tps65010",
-        .id             = 888,          /* FIXME assign "official" value */
         .flags          = I2C_DF_NOTIFY,
         .attach_adapter = tps65010_scan_bus,
         .detach_client  = __exit_p(tps65010_detach_client),
@@ -744,7 +738,7 @@ int tps65010_set_led(unsigned led, unsigned mode)
         if (!the_tps)
                 return -ENODEV;
 
-        if(led == LED1)
+        if (led == LED1)
                 offs = 0;
         else {
                 offs = 2;
@@ -753,11 +747,13 @@ int tps65010_set_led(unsigned led, unsigned mode)
 
         down(&the_tps->lock);
 
-        dev_dbg (&the_tps->client.dev, "led%i_on   0x%02x\n", led,
-                i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_ON + offs));
+        pr_debug("%s: led%i_on   0x%02x\n", DRIVER_NAME, led,
+                i2c_smbus_read_byte_data(&the_tps->client,
+                                TPS_LED1_ON + offs));
 
-        dev_dbg (&the_tps->client.dev, "led%i_per  0x%02x\n", led,
-                i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_PER + offs));
+        pr_debug("%s: led%i_per  0x%02x\n", DRIVER_NAME, led,
+                i2c_smbus_read_byte_data(&the_tps->client,
+                                TPS_LED1_PER + offs));
 
         switch (mode) {
         case OFF:
@@ -773,7 +769,7 @@ int tps65010_set_led(unsigned led, unsigned mode)
                 led_per = 0x08 | (1 << 7);
                 break;
         default:
-                printk(KERN_ERR "%s: Wrong mode parameter for tps65010_set_led()\n",
+                printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
                        DRIVER_NAME);
                 up(&the_tps->lock);
                 return -EINVAL;
@@ -789,7 +785,7 @@ int tps65010_set_led(unsigned led, unsigned mode)
                 return status;
         }
 
-        dev_dbg (&the_tps->client.dev, "led%i_on   0x%02x\n", led,
+        pr_debug("%s: led%i_on   0x%02x\n", DRIVER_NAME, led,
                 i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_ON + offs));
 
         status = i2c_smbus_write_byte_data(&the_tps->client,
@@ -802,8 +798,9 @@ int tps65010_set_led(unsigned led, unsigned mode)
                 return status;
         }
 
-        dev_dbg (&the_tps->client.dev, "led%i_per  0x%02x\n", led,
-                i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_PER + offs));
+        pr_debug("%s: led%i_per  0x%02x\n", DRIVER_NAME, led,
+                i2c_smbus_read_byte_data(&the_tps->client,
+                                TPS_LED1_PER + offs));
 
         up(&the_tps->lock);
 
@@ -874,7 +871,7 @@ int tps65010_set_low_pwr(unsigned mode)
 
         if (status != 0)
                 printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
-                       DRIVER_NAME);
+                        DRIVER_NAME);
         else
                 pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
                         i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
@@ -900,14 +897,14 @@ int tps65010_config_vregs1(unsigned value)
         down(&the_tps->lock);
 
         pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
-                        i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
+                        i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
 
         status = i2c_smbus_write_byte_data(&the_tps->client,
                         TPS_VREGS1, value);
 
         if (status != 0)
                 printk(KERN_ERR "%s: Failed to write vregs1 register\n",
-                        DRIVER_NAME);
+                        DRIVER_NAME);
         else
                 pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
                         i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
@@ -1009,7 +1006,7 @@ static int __init tps_init(void)
                 msleep(10);
         }
 
-#if defined(CONFIG_ARM)
+#ifdef  CONFIG_ARM
         if (machine_is_omap_osk()) {
 
                 // FIXME: More should be placed in the initialization code