aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/chips
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2008-12-22 06:16:27 -0500
committerSamuel Ortiz <samuel@sortiz.org>2009-01-04 06:17:43 -0500
commit87c13493e6a59c0da55c2824f0205f9ef941b760 (patch)
treee18146c62399a0195be0bb8e6f215dc102c4df7a /drivers/i2c/chips
parent0931a4c6dbfab03f2bfd22a9170130f7b155d53a (diff)
mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd
Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Diffstat (limited to 'drivers/i2c/chips')
-rw-r--r--drivers/i2c/chips/Kconfig13
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/i2c/chips/tps65010.c1072
3 files changed, 0 insertions, 1086 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 4c35702830ce..fa69c992c442 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,19 +126,6 @@ config ISP1301_OMAP
126 This driver can also be built as a module. If so, the module 126 This driver can also be built as a module. If so, the module
127 will be called isp1301_omap. 127 will be called isp1301_omap.
128 128
129config TPS65010
130 tristate "TPS6501x Power Management chips"
131 depends on GPIOLIB
132 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
133 help
134 If you say yes here you get support for the TPS6501x series of
135 Power Management chips. These include voltage regulators,
136 lithium ion/polymer battery charging, and other features that
137 are often used in portable devices like cell phones and cameras.
138
139 This driver can also be built as a module. If so, the module
140 will be called tps65010.
141
142config SENSORS_MAX6875 129config SENSORS_MAX6875
143 tristate "Maxim MAX6875 Power supply supervisor" 130 tristate "Maxim MAX6875 Power supply supervisor"
144 depends on EXPERIMENTAL 131 depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 23d2a31b0a64..0c7e2f1e0c4b 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
19obj-$(CONFIG_PCF8575) += pcf8575.o 19obj-$(CONFIG_PCF8575) += pcf8575.o
20obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o 20obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
21obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o 21obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
22obj-$(CONFIG_TPS65010) += tps65010.o
23obj-$(CONFIG_MENELAUS) += menelaus.o 22obj-$(CONFIG_MENELAUS) += menelaus.o
24obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o 23obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
25obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o 24obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
deleted file mode 100644
index acf8b9d5f575..000000000000
--- a/drivers/i2c/chips/tps65010.c
+++ /dev/null
@@ -1,1072 +0,0 @@
1/*
2 * tps65010 - driver for tps6501x power management chips
3 *
4 * Copyright (C) 2004 Texas Instruments
5 * Copyright (C) 2004-2005 David Brownell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22#include <linux/kernel.h>
23#include <linux/module.h>
24#include <linux/init.h>
25#include <linux/slab.h>
26#include <linux/interrupt.h>
27#include <linux/i2c.h>
28#include <linux/delay.h>
29#include <linux/workqueue.h>
30#include <linux/debugfs.h>
31#include <linux/seq_file.h>
32#include <linux/mutex.h>
33#include <linux/platform_device.h>
34
35#include <linux/i2c/tps65010.h>
36
37#include <asm/gpio.h>
38
39
40/*-------------------------------------------------------------------------*/
41
42#define DRIVER_VERSION "2 May 2005"
43#define DRIVER_NAME (tps65010_driver.driver.name)
44
45MODULE_DESCRIPTION("TPS6501x Power Management Driver");
46MODULE_LICENSE("GPL");
47
48static struct i2c_driver tps65010_driver;
49
50/*-------------------------------------------------------------------------*/
51
52/* This driver handles a family of multipurpose chips, which incorporate
53 * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
54 * and other features often needed in portable devices like cell phones
55 * or digital cameras.
56 *
57 * The tps65011 and tps65013 have different voltage settings compared
58 * to tps65010 and tps65012. The tps65013 has a NO_CHG status/irq.
59 * All except tps65010 have "wait" mode, possibly defaulted so that
60 * battery-insert != device-on.
61 *
62 * We could distinguish between some models by checking VDCDC1.UVLO or
63 * other registers, unless they've been changed already after powerup
64 * as part of board setup by a bootloader.
65 */
66enum tps_model {
67 TPS65010,
68 TPS65011,
69 TPS65012,
70 TPS65013,
71};
72
73struct tps65010 {
74 struct i2c_client *client;
75 struct mutex lock;
76 struct delayed_work work;
77 struct dentry *file;
78 unsigned charging:1;
79 unsigned por:1;
80 unsigned model:8;
81 u16 vbus;
82 unsigned long flags;
83#define FLAG_VBUS_CHANGED 0
84#define FLAG_IRQ_ENABLE 1
85
86 /* copies of last register state */
87 u8 chgstatus, regstatus, chgconf;
88 u8 nmask1, nmask2;
89
90 u8 outmask;
91 struct gpio_chip chip;
92 struct platform_device *leds;
93};
94
95#define POWER_POLL_DELAY msecs_to_jiffies(5000)
96
97/*-------------------------------------------------------------------------*/
98
99#if defined(DEBUG) || defined(CONFIG_DEBUG_FS)
100
101static void dbg_chgstat(char *buf, size_t len, u8 chgstatus)
102{
103 snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n",
104 chgstatus,
105 (chgstatus & TPS_CHG_USB) ? " USB" : "",
106 (chgstatus & TPS_CHG_AC) ? " AC" : "",
107 (chgstatus & TPS_CHG_THERM) ? " therm" : "",
108 (chgstatus & TPS_CHG_TERM) ? " done" :
109 ((chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
110 ? " (charging)" : ""),
111 (chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "",
112 (chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "",
113 (chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "",
114 (chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : "");
115}
116
117static void dbg_regstat(char *buf, size_t len, u8 regstatus)
118{
119 snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n",
120 regstatus,
121 (regstatus & TPS_REG_ONOFF) ? "off" : "(on)",
122 (regstatus & TPS_REG_COVER) ? " uncover" : "",
123 (regstatus & TPS_REG_UVLO) ? " UVLO" : "",
124 (regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
125 (regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "",
126 (regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
127 (regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
128 (regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
129}
130
131static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
132{
133 const char *hibit;
134
135 if (por)
136 hibit = (chgconfig & TPS_CHARGE_POR)
137 ? "POR=69ms" : "POR=1sec";
138 else
139 hibit = (chgconfig & TPS65013_AUA) ? "AUA" : "";
140
141 snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n",
142 chgconfig, hibit,
143 (chgconfig & TPS_CHARGE_RESET) ? " reset" : "",
144 (chgconfig & TPS_CHARGE_FAST) ? " fast" : "",
145 ({int p; switch ((chgconfig >> 3) & 3) {
146 case 3: p = 100; break;
147 case 2: p = 75; break;
148 case 1: p = 50; break;
149 default: p = 25; break;
150 }; p; }),
151 (chgconfig & TPS_VBUS_CHARGING)
152 ? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100)
153 : 0,
154 (chgconfig & TPS_CHARGE_ENABLE) ? "" : "No");
155}
156
157#endif
158
159#ifdef DEBUG
160
161static void show_chgstatus(const char *label, u8 chgstatus)
162{
163 char buf [100];
164
165 dbg_chgstat(buf, sizeof buf, chgstatus);
166 pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
167}
168
169static void show_regstatus(const char *label, u8 regstatus)
170{
171 char buf [100];
172
173 dbg_regstat(buf, sizeof buf, regstatus);
174 pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
175}
176
177static void show_chgconfig(int por, const char *label, u8 chgconfig)
178{
179 char buf [100];
180
181 dbg_chgconf(por, buf, sizeof buf, chgconfig);
182 pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
183}
184
185#else
186
187static inline void show_chgstatus(const char *label, u8 chgstatus) { }
188static inline void show_regstatus(const char *label, u8 chgstatus) { }
189static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { }
190
191#endif
192
193#ifdef CONFIG_DEBUG_FS
194
195static int dbg_show(struct seq_file *s, void *_)
196{
197 struct tps65010 *tps = s->private;
198 u8 value, v2;
199 unsigned i;
200 char buf[100];
201 const char *chip;
202
203 switch (tps->model) {
204 case TPS65010: chip = "tps65010"; break;
205 case TPS65011: chip = "tps65011"; break;
206 case TPS65012: chip = "tps65012"; break;
207 case TPS65013: chip = "tps65013"; break;
208 default: chip = NULL; break;
209 }
210 seq_printf(s, "driver %s\nversion %s\nchip %s\n\n",
211 DRIVER_NAME, DRIVER_VERSION, chip);
212
213 mutex_lock(&tps->lock);
214
215 /* FIXME how can we tell whether a battery is present?
216 * likely involves a charge gauging chip (like BQ26501).
217 */
218
219 seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) ");
220
221
222 /* registers for monitoring battery charging and status; note
223 * that reading chgstat and regstat may ack IRQs...
224 */
225 value = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
226 dbg_chgconf(tps->por, buf, sizeof buf, value);
227 seq_printf(s, "chgconfig %s", buf);
228
229 value = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
230 dbg_chgstat(buf, sizeof buf, value);
231 seq_printf(s, "chgstat %s", buf);
232 value = i2c_smbus_read_byte_data(tps->client, TPS_MASK1);
233 dbg_chgstat(buf, sizeof buf, value);
234 seq_printf(s, "mask1 %s", buf);
235 /* ignore ackint1 */
236
237 value = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
238 dbg_regstat(buf, sizeof buf, value);
239 seq_printf(s, "regstat %s", buf);
240 value = i2c_smbus_read_byte_data(tps->client, TPS_MASK2);
241 dbg_regstat(buf, sizeof buf, value);
242 seq_printf(s, "mask2 %s\n", buf);
243 /* ignore ackint2 */
244
245 (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
246
247
248 /* VMAIN voltage, enable lowpower, etc */
249 value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC1);
250 seq_printf(s, "vdcdc1 %02x\n", value);
251
252 /* VCORE voltage, vibrator on/off */
253 value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC2);
254 seq_printf(s, "vdcdc2 %02x\n", value);
255
256 /* both LD0s, and their lowpower behavior */
257 value = i2c_smbus_read_byte_data(tps->client, TPS_VREGS1);
258 seq_printf(s, "vregs1 %02x\n\n", value);
259
260
261 /* LEDs and GPIOs */
262 value = i2c_smbus_read_byte_data(tps->client, TPS_LED1_ON);
263 v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED1_PER);
264 seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n",
265 (value & 0x80)
266 ? ((v2 & 0x80) ? "on" : "off")
267 : ((v2 & 0x80) ? "blink" : "(nPG)"),
268 value, v2,
269 (value & 0x7f) * 10, (v2 & 0x7f) * 100);
270
271 value = i2c_smbus_read_byte_data(tps->client, TPS_LED2_ON);
272 v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED2_PER);
273 seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n",
274 (value & 0x80)
275 ? ((v2 & 0x80) ? "on" : "off")
276 : ((v2 & 0x80) ? "blink" : "off"),
277 value, v2,
278 (value & 0x7f) * 10, (v2 & 0x7f) * 100);
279
280 value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
281 v2 = i2c_smbus_read_byte_data(tps->client, TPS_MASK3);
282 seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
283
284 for (i = 0; i < 4; i++) {
285 if (value & (1 << (4 + i)))
286 seq_printf(s, " gpio%d-out %s\n", i + 1,
287 (value & (1 << i)) ? "low" : "hi ");
288 else
289 seq_printf(s, " gpio%d-in %s %s %s\n", i + 1,
290 (value & (1 << i)) ? "hi " : "low",
291 (v2 & (1 << i)) ? "no-irq" : "irq",
292 (v2 & (1 << (4 + i))) ? "rising" : "falling");
293 }
294
295 mutex_unlock(&tps->lock);
296 return 0;
297}
298
299static int dbg_tps_open(struct inode *inode, struct file *file)
300{
301 return single_open(file, dbg_show, inode->i_private);
302}
303
304static const struct file_operations debug_fops = {
305 .open = dbg_tps_open,
306 .read = seq_read,
307 .llseek = seq_lseek,
308 .release = single_release,
309};
310
311#define DEBUG_FOPS &debug_fops
312
313#else
314#define DEBUG_FOPS NULL
315#endif
316
317/*-------------------------------------------------------------------------*/
318
319/* handle IRQS in a task context, so we can use I2C calls */
320static void tps65010_interrupt(struct tps65010 *tps)
321{
322 u8 tmp = 0, mask, poll;
323
324 /* IRQs won't trigger for certain events, but we can get
325 * others by polling (normally, with external power applied).
326 */
327 poll = 0;
328
329 /* regstatus irqs */
330 if (tps->nmask2) {
331 tmp = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
332 mask = tmp ^ tps->regstatus;
333 tps->regstatus = tmp;
334 mask &= tps->nmask2;
335 } else
336 mask = 0;
337 if (mask) {
338 tps->regstatus = tmp;
339 /* may need to shut something down ... */
340
341 /* "off" usually means deep sleep */
342 if (tmp & TPS_REG_ONOFF) {
343 pr_info("%s: power off button\n", DRIVER_NAME);
344#if 0
345 /* REVISIT: this might need its own workqueue
346 * plus tweaks including deadlock avoidance ...
347 * also needs to get error handling and probably
348 * an #ifdef CONFIG_HIBERNATION
349 */
350 hibernate();
351#endif
352 poll = 1;
353 }
354 }
355
356 /* chgstatus irqs */
357 if (tps->nmask1) {
358 tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
359 mask = tmp ^ tps->chgstatus;
360 tps->chgstatus = tmp;
361 mask &= tps->nmask1;
362 } else
363 mask = 0;
364 if (mask) {
365 unsigned charging = 0;
366
367 show_chgstatus("chg/irq", tmp);
368 if (tmp & (TPS_CHG_USB|TPS_CHG_AC))
369 show_chgconfig(tps->por, "conf", tps->chgconf);
370
371 /* Unless it was turned off or disabled, we charge any
372 * battery whenever there's power available for it
373 * and the charger hasn't been disabled.
374 */
375 if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC))
376 && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
377 && (tps->chgconf & TPS_CHARGE_ENABLE)
378 ) {
379 if (tps->chgstatus & TPS_CHG_USB) {
380 /* VBUS options are readonly until reconnect */
381 if (mask & TPS_CHG_USB)
382 set_bit(FLAG_VBUS_CHANGED, &tps->flags);
383 charging = 1;
384 } else if (tps->chgstatus & TPS_CHG_AC)
385 charging = 1;
386 }
387 if (charging != tps->charging) {
388 tps->charging = charging;
389 pr_info("%s: battery %scharging\n",
390 DRIVER_NAME, charging ? "" :
391 ((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
392 ? "NOT " : "dis"));
393 }
394 }
395
396 /* always poll to detect (a) power removal, without tps65013
397 * NO_CHG IRQ; or (b) restart of charging after stop.
398 */
399 if ((tps->model != TPS65013 || !tps->charging)
400 && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
401 poll = 1;
402 if (poll)
403 (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
404
405 /* also potentially gpio-in rise or fall */
406}
407
408/* handle IRQs and polling using keventd for now */
409static void tps65010_work(struct work_struct *work)
410{
411 struct tps65010 *tps;
412
413 tps = container_of(work, struct tps65010, work.work);
414 mutex_lock(&tps->lock);
415
416 tps65010_interrupt(tps);
417
418 if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
419 int status;
420 u8 chgconfig, tmp;
421
422 chgconfig = i2c_smbus_read_byte_data(tps->client,
423 TPS_CHGCONFIG);
424 chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING);
425 if (tps->vbus == 500)
426 chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING;
427 else if (tps->vbus >= 100)
428 chgconfig |= TPS_VBUS_CHARGING;
429
430 status = i2c_smbus_write_byte_data(tps->client,
431 TPS_CHGCONFIG, chgconfig);
432
433 /* vbus update fails unless VBUS is connected! */
434 tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
435 tps->chgconf = tmp;
436 show_chgconfig(tps->por, "update vbus", tmp);
437 }
438
439 if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
440 enable_irq(tps->client->irq);
441
442 mutex_unlock(&tps->lock);
443}
444
445static irqreturn_t tps65010_irq(int irq, void *_tps)
446{
447 struct tps65010 *tps = _tps;
448
449 disable_irq_nosync(irq);
450 set_bit(FLAG_IRQ_ENABLE, &tps->flags);
451 (void) schedule_work(&tps->work.work);
452 return IRQ_HANDLED;
453}
454
455/*-------------------------------------------------------------------------*/
456
457/* offsets 0..3 == GPIO1..GPIO4
458 * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
459 * offset 6 == vibrator motor driver
460 */
461static void
462tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
463{
464 if (offset < 4)
465 tps65010_set_gpio_out_value(offset + 1, value);
466 else if (offset < 6)
467 tps65010_set_led(offset - 3, value ? ON : OFF);
468 else
469 tps65010_set_vib(value);
470}
471
472static int
473tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
474{
475 /* GPIOs may be input-only */
476 if (offset < 4) {
477 struct tps65010 *tps;
478
479 tps = container_of(chip, struct tps65010, chip);
480 if (!(tps->outmask & (1 << offset)))
481 return -EINVAL;
482 tps65010_set_gpio_out_value(offset + 1, value);
483 } else if (offset < 6)
484 tps65010_set_led(offset - 3, value ? ON : OFF);
485 else
486 tps65010_set_vib(value);
487
488 return 0;
489}
490
491static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
492{
493 int value;
494 struct tps65010 *tps;
495
496 tps = container_of(chip, struct tps65010, chip);
497
498 if (offset < 4) {
499 value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
500 if (value < 0)
501 return 0;
502 if (value & (1 << (offset + 4))) /* output */
503 return !(value & (1 << offset));
504 else /* input */
505 return (value & (1 << offset));
506 }
507
508 /* REVISIT we *could* report LED1/nPG and LED2 state ... */
509 return 0;
510}
511
512
513/*-------------------------------------------------------------------------*/
514
515static struct tps65010 *the_tps;
516
517static int __exit tps65010_remove(struct i2c_client *client)
518{
519 struct tps65010 *tps = i2c_get_clientdata(client);
520 struct tps65010_board *board = client->dev.platform_data;
521
522 if (board && board->teardown) {
523 int status = board->teardown(client, board->context);
524 if (status < 0)
525 dev_dbg(&client->dev, "board %s %s err %d\n",
526 "teardown", client->name, status);
527 }
528 if (client->irq > 0)
529 free_irq(client->irq, tps);
530 cancel_delayed_work(&tps->work);
531 flush_scheduled_work();
532 debugfs_remove(tps->file);
533 kfree(tps);
534 i2c_set_clientdata(client, NULL);
535 the_tps = NULL;
536 return 0;
537}
538
539static int tps65010_probe(struct i2c_client *client,
540 const struct i2c_device_id *id)
541{
542 struct tps65010 *tps;
543 int status;
544 struct tps65010_board *board = client->dev.platform_data;
545
546 if (the_tps) {
547 dev_dbg(&client->dev, "only one tps6501x chip allowed\n");
548 return -ENODEV;
549 }
550
551 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
552 return -EINVAL;
553
554 tps = kzalloc(sizeof *tps, GFP_KERNEL);
555 if (!tps)
556 return -ENOMEM;
557
558 mutex_init(&tps->lock);
559 INIT_DELAYED_WORK(&tps->work, tps65010_work);
560 tps->client = client;
561 tps->model = id->driver_data;
562
563 /* the IRQ is active low, but many gpio lines can't support that
564 * so this driver uses falling-edge triggers instead.
565 */
566 if (client->irq > 0) {
567 status = request_irq(client->irq, tps65010_irq,
568 IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING,
569 DRIVER_NAME, tps);
570 if (status < 0) {
571 dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
572 client->irq, status);
573 goto fail1;
574 }
575 /* annoying race here, ideally we'd have an option
576 * to claim the irq now and enable it later.
577 * FIXME genirq IRQF_NOAUTOEN now solves that ...
578 */
579 disable_irq(client->irq);
580 set_bit(FLAG_IRQ_ENABLE, &tps->flags);
581 } else
582 dev_warn(&client->dev, "IRQ not configured!\n");
583
584
585 switch (tps->model) {
586 case TPS65010:
587 case TPS65012:
588 tps->por = 1;
589 break;
590 /* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
591 }
592 tps->chgconf = i2c_smbus_read_byte_data(client, TPS_CHGCONFIG);
593 show_chgconfig(tps->por, "conf/init", tps->chgconf);
594
595 show_chgstatus("chg/init",
596 i2c_smbus_read_byte_data(client, TPS_CHGSTATUS));
597 show_regstatus("reg/init",
598 i2c_smbus_read_byte_data(client, TPS_REGSTATUS));
599
600 pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME,
601 i2c_smbus_read_byte_data(client, TPS_VDCDC1),
602 i2c_smbus_read_byte_data(client, TPS_VDCDC2),
603 i2c_smbus_read_byte_data(client, TPS_VREGS1));
604 pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME,
605 i2c_smbus_read_byte_data(client, TPS_DEFGPIO),
606 i2c_smbus_read_byte_data(client, TPS_MASK3));
607
608 i2c_set_clientdata(client, tps);
609 the_tps = tps;
610
611#if defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
612 /* USB hosts can't draw VBUS. OTG devices could, later
613 * when OTG infrastructure enables it. USB peripherals
614 * could be relying on VBUS while booting, though.
615 */
616 tps->vbus = 100;
617#endif
618
619 /* unmask the "interesting" irqs, then poll once to
620 * kickstart monitoring, initialize shadowed status
621 * registers, and maybe disable VBUS draw.
622 */
623 tps->nmask1 = ~0;
624 (void) i2c_smbus_write_byte_data(client, TPS_MASK1, ~tps->nmask1);
625
626 tps->nmask2 = TPS_REG_ONOFF;
627 if (tps->model == TPS65013)
628 tps->nmask2 |= TPS_REG_NO_CHG;
629 (void) i2c_smbus_write_byte_data(client, TPS_MASK2, ~tps->nmask2);
630
631 (void) i2c_smbus_write_byte_data(client, TPS_MASK3, 0x0f
632 | i2c_smbus_read_byte_data(client, TPS_MASK3));
633
634 tps65010_work(&tps->work.work);
635
636 tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
637 tps, DEBUG_FOPS);
638
639 /* optionally register GPIOs */
640 if (board && board->base > 0) {
641 tps->outmask = board->outmask;
642
643 tps->chip.label = client->name;
644 tps->chip.dev = &client->dev;
645 tps->chip.owner = THIS_MODULE;
646
647 tps->chip.set = tps65010_gpio_set;
648 tps->chip.direction_output = tps65010_output;
649
650 /* NOTE: only partial support for inputs; nyet IRQs */
651 tps->chip.get = tps65010_gpio_get;
652
653 tps->chip.base = board->base;
654 tps->chip.ngpio = 7;
655 tps->chip.can_sleep = 1;
656
657 status = gpiochip_add(&tps->chip);
658 if (status < 0)
659 dev_err(&client->dev, "can't add gpiochip, err %d\n",
660 status);
661 else if (board->setup) {
662 status = board->setup(client, board->context);
663 if (status < 0) {
664 dev_dbg(&client->dev,
665 "board %s %s err %d\n",
666 "setup", client->name, status);
667 status = 0;
668 }
669 }
670 }
671
672 return 0;
673fail1:
674 kfree(tps);
675 return status;
676}
677
678static const struct i2c_device_id tps65010_id[] = {
679 { "tps65010", TPS65010 },
680 { "tps65011", TPS65011 },
681 { "tps65012", TPS65012 },
682 { "tps65013", TPS65013 },
683 { "tps65014", TPS65011 }, /* tps65011 charging at 6.5V max */
684 { }
685};
686MODULE_DEVICE_TABLE(i2c, tps65010_id);
687
688static struct i2c_driver tps65010_driver = {
689 .driver = {
690 .name = "tps65010",
691 },
692 .probe = tps65010_probe,
693 .remove = __exit_p(tps65010_remove),
694 .id_table = tps65010_id,
695};
696
697/*-------------------------------------------------------------------------*/
698
699/* Draw from VBUS:
700 * 0 mA -- DON'T DRAW (might supply power instead)
701 * 100 mA -- usb unit load (slowest charge rate)
702 * 500 mA -- usb high power (fast battery charge)
703 */
704int tps65010_set_vbus_draw(unsigned mA)
705{
706 unsigned long flags;
707
708 if (!the_tps)
709 return -ENODEV;
710
711 /* assumes non-SMP */
712 local_irq_save(flags);
713 if (mA >= 500)
714 mA = 500;
715 else if (mA >= 100)
716 mA = 100;
717 else
718 mA = 0;
719 the_tps->vbus = mA;
720 if ((the_tps->chgstatus & TPS_CHG_USB)
721 && test_and_set_bit(
722 FLAG_VBUS_CHANGED, &the_tps->flags)) {
723 /* gadget drivers call this in_irq() */
724 (void) schedule_work(&the_tps->work.work);
725 }
726 local_irq_restore(flags);
727
728 return 0;
729}
730EXPORT_SYMBOL(tps65010_set_vbus_draw);
731
732/*-------------------------------------------------------------------------*/
733/* tps65010_set_gpio_out_value parameter:
734 * gpio: GPIO1, GPIO2, GPIO3 or GPIO4
735 * value: LOW or HIGH
736 */
737int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
738{
739 int status;
740 unsigned defgpio;
741
742 if (!the_tps)
743 return -ENODEV;
744 if ((gpio < GPIO1) || (gpio > GPIO4))
745 return -EINVAL;
746
747 mutex_lock(&the_tps->lock);
748
749 defgpio = i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO);
750
751 /* Configure GPIO for output */
752 defgpio |= 1 << (gpio + 3);
753
754 /* Writing 1 forces a logic 0 on that GPIO and vice versa */
755 switch (value) {
756 case LOW:
757 defgpio |= 1 << (gpio - 1); /* set GPIO low by writing 1 */
758 break;
759 /* case HIGH: */
760 default:
761 defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */
762 break;
763 }
764
765 status = i2c_smbus_write_byte_data(the_tps->client,
766 TPS_DEFGPIO, defgpio);
767
768 pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME,
769 gpio, value ? "high" : "low",
770 i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO));
771
772 mutex_unlock(&the_tps->lock);
773 return status;
774}
775EXPORT_SYMBOL(tps65010_set_gpio_out_value);
776
777/*-------------------------------------------------------------------------*/
778/* tps65010_set_led parameter:
779 * led: LED1 or LED2
780 * mode: ON, OFF or BLINK
781 */
782int tps65010_set_led(unsigned led, unsigned mode)
783{
784 int status;
785 unsigned led_on, led_per, offs;
786
787 if (!the_tps)
788 return -ENODEV;
789
790 if (led == LED1)
791 offs = 0;
792 else {
793 offs = 2;
794 led = LED2;
795 }
796
797 mutex_lock(&the_tps->lock);
798
799 pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
800 i2c_smbus_read_byte_data(the_tps->client,
801 TPS_LED1_ON + offs));
802
803 pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
804 i2c_smbus_read_byte_data(the_tps->client,
805 TPS_LED1_PER + offs));
806
807 switch (mode) {
808 case OFF:
809 led_on = 1 << 7;
810 led_per = 0 << 7;
811 break;
812 case ON:
813 led_on = 1 << 7;
814 led_per = 1 << 7;
815 break;
816 case BLINK:
817 led_on = 0x30 | (0 << 7);
818 led_per = 0x08 | (1 << 7);
819 break;
820 default:
821 printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
822 DRIVER_NAME);
823 mutex_unlock(&the_tps->lock);
824 return -EINVAL;
825 }
826
827 status = i2c_smbus_write_byte_data(the_tps->client,
828 TPS_LED1_ON + offs, led_on);
829
830 if (status != 0) {
831 printk(KERN_ERR "%s: Failed to write led%i_on register\n",
832 DRIVER_NAME, led);
833 mutex_unlock(&the_tps->lock);
834 return status;
835 }
836
837 pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
838 i2c_smbus_read_byte_data(the_tps->client, TPS_LED1_ON + offs));
839
840 status = i2c_smbus_write_byte_data(the_tps->client,
841 TPS_LED1_PER + offs, led_per);
842
843 if (status != 0) {
844 printk(KERN_ERR "%s: Failed to write led%i_per register\n",
845 DRIVER_NAME, led);
846 mutex_unlock(&the_tps->lock);
847 return status;
848 }
849
850 pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
851 i2c_smbus_read_byte_data(the_tps->client,
852 TPS_LED1_PER + offs));
853
854 mutex_unlock(&the_tps->lock);
855
856 return status;
857}
858EXPORT_SYMBOL(tps65010_set_led);
859
860/*-------------------------------------------------------------------------*/
861/* tps65010_set_vib parameter:
862 * value: ON or OFF
863 */
864int tps65010_set_vib(unsigned value)
865{
866 int status;
867 unsigned vdcdc2;
868
869 if (!the_tps)
870 return -ENODEV;
871
872 mutex_lock(&the_tps->lock);
873
874 vdcdc2 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC2);
875 vdcdc2 &= ~(1 << 1);
876 if (value)
877 vdcdc2 |= (1 << 1);
878 status = i2c_smbus_write_byte_data(the_tps->client,
879 TPS_VDCDC2, vdcdc2);
880
881 pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
882
883 mutex_unlock(&the_tps->lock);
884 return status;
885}
886EXPORT_SYMBOL(tps65010_set_vib);
887
888/*-------------------------------------------------------------------------*/
889/* tps65010_set_low_pwr parameter:
890 * mode: ON or OFF
891 */
892int tps65010_set_low_pwr(unsigned mode)
893{
894 int status;
895 unsigned vdcdc1;
896
897 if (!the_tps)
898 return -ENODEV;
899
900 mutex_lock(&the_tps->lock);
901
902 pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
903 mode ? "enable" : "disable",
904 i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
905
906 vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
907
908 switch (mode) {
909 case OFF:
910 vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
911 break;
912 /* case ON: */
913 default:
914 vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
915 break;
916 }
917
918 status = i2c_smbus_write_byte_data(the_tps->client,
919 TPS_VDCDC1, vdcdc1);
920
921 if (status != 0)
922 printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
923 DRIVER_NAME);
924 else
925 pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
926 i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
927
928 mutex_unlock(&the_tps->lock);
929
930 return status;
931}
932EXPORT_SYMBOL(tps65010_set_low_pwr);
933
934/*-------------------------------------------------------------------------*/
935/* tps65010_config_vregs1 parameter:
936 * value to be written to VREGS1 register
937 * Note: The complete register is written, set all bits you need
938 */
939int tps65010_config_vregs1(unsigned value)
940{
941 int status;
942
943 if (!the_tps)
944 return -ENODEV;
945
946 mutex_lock(&the_tps->lock);
947
948 pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
949 i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
950
951 status = i2c_smbus_write_byte_data(the_tps->client,
952 TPS_VREGS1, value);
953
954 if (status != 0)
955 printk(KERN_ERR "%s: Failed to write vregs1 register\n",
956 DRIVER_NAME);
957 else
958 pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
959 i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
960
961 mutex_unlock(&the_tps->lock);
962
963 return status;
964}
965EXPORT_SYMBOL(tps65010_config_vregs1);
966
967/*-------------------------------------------------------------------------*/
968/* tps65013_set_low_pwr parameter:
969 * mode: ON or OFF
970 */
971
972/* FIXME: Assumes AC or USB power is present. Setting AUA bit is not
973 required if power supply is through a battery */
974
975int tps65013_set_low_pwr(unsigned mode)
976{
977 int status;
978 unsigned vdcdc1, chgconfig;
979
980 if (!the_tps || the_tps->por)
981 return -ENODEV;
982
983 mutex_lock(&the_tps->lock);
984
985 pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
986 DRIVER_NAME,
987 mode ? "enable" : "disable",
988 i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG),
989 i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
990
991 chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
992 vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
993
994 switch (mode) {
995 case OFF:
996 chgconfig &= ~TPS65013_AUA; /* disable AUA bit */
997 vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
998 break;
999 /* case ON: */
1000 default:
1001 chgconfig |= TPS65013_AUA; /* enable AUA bit */
1002 vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
1003 break;
1004 }
1005
1006 status = i2c_smbus_write_byte_data(the_tps->client,
1007 TPS_CHGCONFIG, chgconfig);
1008 if (status != 0) {
1009 printk(KERN_ERR "%s: Failed to write chconfig register\n",
1010 DRIVER_NAME);
1011 mutex_unlock(&the_tps->lock);
1012 return status;
1013 }
1014
1015 chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
1016 the_tps->chgconf = chgconfig;
1017 show_chgconfig(0, "chgconf", chgconfig);
1018
1019 status = i2c_smbus_write_byte_data(the_tps->client,
1020 TPS_VDCDC1, vdcdc1);
1021
1022 if (status != 0)
1023 printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
1024 DRIVER_NAME);
1025 else
1026 pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
1027 i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
1028
1029 mutex_unlock(&the_tps->lock);
1030
1031 return status;
1032}
1033EXPORT_SYMBOL(tps65013_set_low_pwr);
1034
1035/*-------------------------------------------------------------------------*/
1036
1037static int __init tps_init(void)
1038{
1039 u32 tries = 3;
1040 int status = -ENODEV;
1041
1042 printk(KERN_INFO "%s: version %s\n", DRIVER_NAME, DRIVER_VERSION);
1043
1044 /* some boards have startup glitches */
1045 while (tries--) {
1046 status = i2c_add_driver(&tps65010_driver);
1047 if (the_tps)
1048 break;
1049 i2c_del_driver(&tps65010_driver);
1050 if (!tries) {
1051 printk(KERN_ERR "%s: no chip?\n", DRIVER_NAME);
1052 return -ENODEV;
1053 }
1054 pr_debug("%s: re-probe ...\n", DRIVER_NAME);
1055 msleep(10);
1056 }
1057
1058 return status;
1059}
1060/* NOTE: this MUST be initialized before the other parts of the system
1061 * that rely on it ... but after the i2c bus on which this relies.
1062 * That is, much earlier than on PC-type systems, which don't often use
1063 * I2C as a core system bus.
1064 */
1065subsys_initcall(tps_init);
1066
1067static void __exit tps_exit(void)
1068{
1069 i2c_del_driver(&tps65010_driver);
1070}
1071module_exit(tps_exit);
1072
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-12 14:29:40 -0500