Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

7 files changed, 27 insertions, 16 deletions

diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index f70f46582c6c..4687af40dd50 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -87,9 +87,9 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
         outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
 
         timeout = ALI1563_MAX_TIMEOUT;
-        do
+        do {
                 msleep(1);
-        while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
+        } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
 
         dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
                 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
@@ -157,9 +157,9 @@ static int ali1563_block_start(struct i2c_adapter * a)
         outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
 
         timeout = ALI1563_MAX_TIMEOUT;
-        do
+        do {
                 msleep(1);
-        while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
+        } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
 
         dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
                 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index b309ac2c3d5c..fe3fb567317d 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -693,13 +693,13 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
         }
 
         /* Set TWI internal clock as 10MHz */
-        write_CONTROL(iface, ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
+        write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F);
 
         /*
          * We will not end up with a CLKDIV=0 because no one will specify
-         * 20kHz SCL or less in Kconfig now. (5 * 1024 / 20 = 0x100)
+         * 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250)
          */
-        clkhilow = 5 * 1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ;
+        clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2;
 
         /* Set Twi interface clock as specified */
         write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 75bf3ad18099..0037e31076ba 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -247,7 +247,13 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
         }
         dev->idle = 0;
-        omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+
+        /*
+         * Don't write to this register if the IE state is 0 as it can
+         * cause deadlock.
+         */
+        if (dev->iestate)
+                omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
 }
 
 static void omap_i2c_idle(struct omap_i2c_dev *dev)
@@ -280,6 +286,11 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
         unsigned long internal_clk = 0;
 
         if (dev->rev >= OMAP_I2C_REV_2) {
+                /* Disable I2C controller before soft reset */
+                omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
+                        omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) &
+                                ~(OMAP_I2C_CON_EN));
+
                 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
                 /* For some reason we need to set the EN bit before the
                  * reset done bit gets set. */
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 0ed68e2ccd22..f7346a9bd95f 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -75,7 +75,7 @@ static int pca_isa_waitforcompletion(void *pd)
         unsigned long timeout;
 
         if (irq > -1) {
-                ret = wait_event_interruptible_timeout(pca_wait,
+                ret = wait_event_timeout(pca_wait,
                                 pca_isa_readbyte(pd, I2C_PCA_CON)
                                 & I2C_PCA_CON_SI, pca_isa_ops.timeout);
         } else {
@@ -96,7 +96,7 @@ static void pca_isa_resetchip(void *pd)
 }
 
 static irqreturn_t pca_handler(int this_irq, void *dev_id) {
-        wake_up_interruptible(&pca_wait);
+        wake_up(&pca_wait);
         return IRQ_HANDLED;
 }
 
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index c4df9d411cd5..5b2213df5ed0 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -84,7 +84,7 @@ static int i2c_pca_pf_waitforcompletion(void *pd)
         unsigned long timeout;
 
         if (i2c->irq) {
-                ret = wait_event_interruptible_timeout(i2c->wait,
+                ret = wait_event_timeout(i2c->wait,
                         i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
                         & I2C_PCA_CON_SI, i2c->adap.timeout);
         } else {
@@ -122,7 +122,7 @@ static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id)
         if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
                 return IRQ_NONE;
 
-        wake_up_interruptible(&i2c->wait);
+        wake_up(&i2c->wait);
 
         return IRQ_HANDLED;
 }
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 1e245e9cad31..e56e4b6823ca 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -324,12 +324,12 @@ static int piix4_transaction(void)
         else
                 msleep(1);
 
-        while ((timeout++ < MAX_TIMEOUT) &&
+        while ((++timeout < MAX_TIMEOUT) &&
                ((temp = inb_p(SMBHSTSTS)) & 0x01))
                 msleep(1);
 
         /* If the SMBus is still busy, we give up */
-        if (timeout >= MAX_TIMEOUT) {
+        if (timeout == MAX_TIMEOUT) {
                 dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
                 result = -ETIMEDOUT;
         }
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index e4b1543015af..a84a909e1234 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -165,10 +165,10 @@ static int vt596_transaction(u8 size)
         do {
                 msleep(1);
                 temp = inb_p(SMBHSTSTS);
-        } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+        } while ((temp & 0x01) && (++timeout < MAX_TIMEOUT));
 
         /* If the SMBus is still busy, we give up */
-        if (timeout >= MAX_TIMEOUT) {
+        if (timeout == MAX_TIMEOUT) {
                 result = -ETIMEDOUT;
                 dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
         }