i2c-s3c2410: Remove default platform data.

The platform data should now always be present when the device
is initialised, so we can remove the default platform data in
the driver.

All the device initialisation points in the board specific code
should already have been changed to initialise this as necessary.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 8 insertions, 31 deletions

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 0aa0142de14f..d6343e2c5889 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -77,16 +77,7 @@ struct s3c24xx_i2c {
 #endif
 };
 
-/* default platform data to use if not supplied in the platform_device
-*/
-
-static struct s3c2410_platform_i2c s3c24xx_i2c_default_platform = {
-        .flags          = 0,
-        .slave_addr     = 0x10,
-        .bus_freq       = 100*1000,
-        .max_freq       = 400*1000,
-        .sda_delay      = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
-};
+/* default platform data removed, dev should always carry data. */
 
 /* s3c24xx_i2c_is2440()
  *
@@ -100,22 +91,6 @@ static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
         return !strcmp(pdev->name, "s3c2440-i2c");
 }
 
-
-/* s3c24xx_i2c_get_platformdata
- *
- * get the platform data associated with the given device, or return
- * the default if there is none
-*/
-
-static inline struct s3c2410_platform_i2c *
-s3c24xx_i2c_get_platformdata(struct device *dev)
-{
-        if (dev->platform_data != NULL)
-                return (struct s3c2410_platform_i2c *)dev->platform_data;
-
-        return &s3c24xx_i2c_default_platform;
-}
-
 /* s3c24xx_i2c_master_complete
  *
  * complete the message and wake up the caller, using the given return code,
@@ -648,7 +623,7 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
 
 static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 {
-        struct s3c2410_platform_i2c *pdata;
+        struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
         unsigned long clkin = clk_get_rate(i2c->clk);
         unsigned int divs, div1;
         u32 iiccon;
@@ -656,8 +631,6 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
         int start, end;
 
         i2c->clkrate = clkin;
-
-        pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
         clkin /= 1000;          /* clkin now in KHz */
 
         dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
@@ -778,7 +751,7 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
         /* get the plafrom data */
 
-        pdata = s3c24xx_i2c_get_platformdata(i2c->dev);
+        pdata = i2c->dev->platform_data;
 
         /* inititalise the gpio */
 
@@ -829,7 +802,11 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
         struct resource *res;
         int ret;
 
-        pdata = s3c24xx_i2c_get_platformdata(&pdev->dev);
+        pdata = pdev->dev.platform_data;
+        if (!pdata) {
+                dev_err(&pdev->dev, "no platform data\n");
+                return -EINVAL;
+        }
 
         /* find the clock and enable it */