Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 490 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
new file mode 100644
index 000000000000..646381b6b3bf
--- /dev/null
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -0,0 +1,490 @@
+/*
+    piix4.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+    Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   Supports:
+        Intel PIIX4, 440MX
+        Serverworks OSB4, CSB5, CSB6
+        SMSC Victory66
+
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/apm_bios.h>
+#include <linux/dmi.h>
+#include <asm/io.h>
+
+
+struct sd {
+        const unsigned short mfr;
+        const unsigned short dev;
+        const unsigned char fn;
+        const char *name;
+};
+
+/* PIIX4 SMBus address offsets */
+#define SMBHSTSTS       (0 + piix4_smba)
+#define SMBHSLVSTS      (1 + piix4_smba)
+#define SMBHSTCNT       (2 + piix4_smba)
+#define SMBHSTCMD       (3 + piix4_smba)
+#define SMBHSTADD       (4 + piix4_smba)
+#define SMBHSTDAT0      (5 + piix4_smba)
+#define SMBHSTDAT1      (6 + piix4_smba)
+#define SMBBLKDAT       (7 + piix4_smba)
+#define SMBSLVCNT       (8 + piix4_smba)
+#define SMBSHDWCMD      (9 + piix4_smba)
+#define SMBSLVEVT       (0xA + piix4_smba)
+#define SMBSLVDAT       (0xC + piix4_smba)
+
+/* count for request_region */
+#define SMBIOSIZE       8
+
+/* PCI Address Constants */
+#define SMBBA           0x090
+#define SMBHSTCFG       0x0D2
+#define SMBSLVC         0x0D3
+#define SMBSHDW1        0x0D4
+#define SMBSHDW2        0x0D5
+#define SMBREV          0x0D6
+
+/* Other settings */
+#define MAX_TIMEOUT     500
+#define  ENABLE_INT9    0
+
+/* PIIX4 constants */
+#define PIIX4_QUICK             0x00
+#define PIIX4_BYTE              0x04
+#define PIIX4_BYTE_DATA         0x08
+#define PIIX4_WORD_DATA         0x0C
+#define PIIX4_BLOCK_DATA        0x14
+
+/* insmod parameters */
+
+/* If force is set to anything different from 0, we forcibly enable the
+   PIIX4. DANGEROUS! */
+static int force = 0;
+module_param (force, int, 0);
+MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the PIIX4 at the given address. VERY DANGEROUS! */
+static int force_addr = 0;
+module_param (force_addr, int, 0);
+MODULE_PARM_DESC(force_addr,
+                 "Forcibly enable the PIIX4 at the given address. "
+                 "EXTREMELY DANGEROUS!");
+
+/* If fix_hstcfg is set to anything different from 0, we reset one of the
+   registers to be a valid value. */
+static int fix_hstcfg = 0;
+module_param (fix_hstcfg, int, 0);
+MODULE_PARM_DESC(fix_hstcfg,
+                "Fix config register. Needed on some boards (Force CPCI735).");
+
+static int piix4_transaction(void);
+
+static unsigned short piix4_smba = 0;
+static struct i2c_adapter piix4_adapter;
+
+static struct dmi_system_id __devinitdata piix4_dmi_table[] = {
+        {
+                .ident = "IBM",
+                .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
+        },
+        { },
+};
+
+static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
+                                const struct pci_device_id *id)
+{
+        unsigned char temp;
+
+        /* match up the function */
+        if (PCI_FUNC(PIIX4_dev->devfn) != id->driver_data)
+                return -ENODEV;
+
+        dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev));
+
+        /* Don't access SMBus on IBM systems which get corrupted eeproms */
+        if (dmi_check_system(piix4_dmi_table) &&
+                        PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
+                dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module "
+                        "may corrupt your serial eeprom! Refusing to load "
+                        "module!\n");
+                return -EPERM;
+        }
+
+        /* Determine the address of the SMBus areas */
+        if (force_addr) {
+                piix4_smba = force_addr & 0xfff0;
+                force = 0;
+        } else {
+                pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
+                piix4_smba &= 0xfff0;
+                if(piix4_smba == 0) {
+                        dev_err(&PIIX4_dev->dev, "SMB base address "
+                                "uninitialized - upgrade BIOS or use "
+                                "force_addr=0xaddr\n");
+                        return -ENODEV;
+                }
+        }
+
+        if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) {
+                dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
+                        piix4_smba);
+                return -ENODEV;
+        }
+
+        pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
+
+        /* Some BIOS will set up the chipset incorrectly and leave a register
+           in an undefined state (causing I2C to act very strangely). */
+        if (temp & 0x02) {
+                if (fix_hstcfg) {
+                        dev_info(&PIIX4_dev->dev, "Working around buggy BIOS "
+                                        "(I2C)\n");
+                        temp &= 0xfd;
+                        pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp);
+                } else {
+                        dev_info(&PIIX4_dev->dev, "Unusual config register "
+                                        "value\n");
+                        dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if "
+                                        "you experience problems\n");
+                }
+        }
+ 
+        /* If force_addr is set, we program the new address here. Just to make
+           sure, we disable the PIIX4 first. */
+        if (force_addr) {
+                pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
+                pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
+                pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
+                dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to "
+                        "new address %04x!\n", piix4_smba);
+        } else if ((temp & 1) == 0) {
+                if (force) {
+                        /* This should never need to be done, but has been
+                         * noted that many Dell machines have the SMBus
+                         * interface on the PIIX4 disabled!? NOTE: This assumes
+                         * I/O space and other allocations WERE done by the
+                         * Bios!  Don't complain if your hardware does weird
+                         * things after enabling this. :') Check for Bios
+                         * updates before resorting to this.
+                         */
+                        pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
+                                              temp | 1);
+                        dev_printk(KERN_NOTICE, &PIIX4_dev->dev,
+                                "WARNING: SMBus interface has been "
+                                "FORCEFULLY ENABLED!\n");
+                } else {
+                        dev_err(&PIIX4_dev->dev,
+                                "Host SMBus controller not enabled!\n");
+                        release_region(piix4_smba, SMBIOSIZE);
+                        piix4_smba = 0;
+                        return -ENODEV;
+                }
+        }
+
+        if ((temp & 0x0E) == 8)
+                dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
+        else if ((temp & 0x0E) == 0)
+                dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
+        else
+                dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration "
+                        "(or code out of date)!\n");
+
+        pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
+        dev_dbg(&PIIX4_dev->dev, "SMBREV = 0x%X\n", temp);
+        dev_dbg(&PIIX4_dev->dev, "SMBA = 0x%X\n", piix4_smba);
+
+        return 0;
+}
+
+/* Another internally used function */
+static int piix4_transaction(void)
+{
+        int temp;
+        int result = 0;
+        int timeout = 0;
+
+        dev_dbg(&piix4_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
+                "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+                inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+                inb_p(SMBHSTDAT1));
+
+        /* Make sure the SMBus host is ready to start transmitting */
+        if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+                dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). "
+                        "Resetting... \n", temp);
+                outb_p(temp, SMBHSTSTS);
+                if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+                        dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp);
+                        return -1;
+                } else {
+                        dev_dbg(&piix4_adapter.dev, "Successfull!\n");
+                }
+        }
+
+        /* start the transaction by setting bit 6 */
+        outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+
+        /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
+        do {
+                msleep(1);
+                temp = inb_p(SMBHSTSTS);
+        } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+
+        /* If the SMBus is still busy, we give up */
+        if (timeout >= MAX_TIMEOUT) {
+                dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
+                result = -1;
+        }
+
+        if (temp & 0x10) {
+                result = -1;
+                dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n");
+        }
+
+        if (temp & 0x08) {
+                result = -1;
+                dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be "
+                        "locked until next hard reset. (sorry!)\n");
+                /* Clock stops and slave is stuck in mid-transmission */
+        }
+
+        if (temp & 0x04) {
+                result = -1;
+                dev_dbg(&piix4_adapter.dev, "Error: no response!\n");
+        }
+
+        if (inb_p(SMBHSTSTS) != 0x00)
+                outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+
+        if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+                dev_err(&piix4_adapter.dev, "Failed reset at end of "
+                        "transaction (%02x)\n", temp);
+        }
+        dev_dbg(&piix4_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+                "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+                inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+                inb_p(SMBHSTDAT1));
+        return result;
+}
+
+/* Return -1 on error. */
+static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
+                 unsigned short flags, char read_write,
+                 u8 command, int size, union i2c_smbus_data * data)
+{
+        int i, len;
+
+        switch (size) {
+        case I2C_SMBUS_PROC_CALL:
+                dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+                return -1;
+        case I2C_SMBUS_QUICK:
+                outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+                       SMBHSTADD);
+                size = PIIX4_QUICK;
+                break;
+        case I2C_SMBUS_BYTE:
+                outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+                       SMBHSTADD);
+                if (read_write == I2C_SMBUS_WRITE)
+                        outb_p(command, SMBHSTCMD);
+                size = PIIX4_BYTE;
+                break;
+        case I2C_SMBUS_BYTE_DATA:
+                outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+                       SMBHSTADD);
+                outb_p(command, SMBHSTCMD);
+                if (read_write == I2C_SMBUS_WRITE)
+                        outb_p(data->byte, SMBHSTDAT0);
+                size = PIIX4_BYTE_DATA;
+                break;
+        case I2C_SMBUS_WORD_DATA:
+                outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+                       SMBHSTADD);
+                outb_p(command, SMBHSTCMD);
+                if (read_write == I2C_SMBUS_WRITE) {
+                        outb_p(data->word & 0xff, SMBHSTDAT0);
+                        outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+                }
+                size = PIIX4_WORD_DATA;
+                break;
+        case I2C_SMBUS_BLOCK_DATA:
+                outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+                       SMBHSTADD);
+                outb_p(command, SMBHSTCMD);
+                if (read_write == I2C_SMBUS_WRITE) {
+                        len = data->block[0];
+                        if (len < 0)
+                                len = 0;
+                        if (len > 32)
+                                len = 32;
+                        outb_p(len, SMBHSTDAT0);
+                        i = inb_p(SMBHSTCNT);   /* Reset SMBBLKDAT */
+                        for (i = 1; i <= len; i++)
+                                outb_p(data->block[i], SMBBLKDAT);
+                }
+                size = PIIX4_BLOCK_DATA;
+                break;
+        }
+
+        outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+
+        if (piix4_transaction())        /* Error in transaction */
+                return -1;
+
+        if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
+                return 0;
+
+
+        switch (size) {
+        case PIIX4_BYTE:        /* Where is the result put? I assume here it is in
+                                   SMBHSTDAT0 but it might just as well be in the
+                                   SMBHSTCMD. No clue in the docs */
+
+                data->byte = inb_p(SMBHSTDAT0);
+                break;
+        case PIIX4_BYTE_DATA:
+                data->byte = inb_p(SMBHSTDAT0);
+                break;
+        case PIIX4_WORD_DATA:
+                data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+                break;
+        case PIIX4_BLOCK_DATA:
+                data->block[0] = inb_p(SMBHSTDAT0);
+                i = inb_p(SMBHSTCNT);   /* Reset SMBBLKDAT */
+                for (i = 1; i <= data->block[0]; i++)
+                        data->block[i] = inb_p(SMBBLKDAT);
+                break;
+        }
+        return 0;
+}
+
+static u32 piix4_func(struct i2c_adapter *adapter)
+{
+        return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+            I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+            I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+        .name           = "Non-I2C SMBus adapter",
+        .id             = I2C_ALGO_SMBUS,
+        .smbus_xfer     = piix4_access,
+        .functionality  = piix4_func,
+};
+
+static struct i2c_adapter piix4_adapter = {
+        .owner          = THIS_MODULE,
+        .class          = I2C_CLASS_HWMON,
+        .algo           = &smbus_algorithm,
+        .name           = "unset",
+};
+
+static struct pci_device_id piix4_ids[] = {
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3),
+          .driver_data = 3 },
+        { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
+          .driver_data = 0 },
+        { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),
+          .driver_data = 0 },
+        { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6),
+          .driver_data = 0 },
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3),
+          .driver_data = 3 },
+        { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3),
+          .driver_data = 0 },
+        { 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, piix4_ids);
+
+static int __devinit piix4_probe(struct pci_dev *dev,
+                                const struct pci_device_id *id)
+{
+        int retval;
+
+        retval = piix4_setup(dev, id);
+        if (retval)
+                return retval;
+
+        /* set up the driverfs linkage to our parent device */
+        piix4_adapter.dev.parent = &dev->dev;
+
+        snprintf(piix4_adapter.name, I2C_NAME_SIZE,
+                "SMBus PIIX4 adapter at %04x", piix4_smba);
+
+        if ((retval = i2c_add_adapter(&piix4_adapter))) {
+                dev_err(&dev->dev, "Couldn't register adapter!\n");
+                release_region(piix4_smba, SMBIOSIZE);
+                piix4_smba = 0;
+        }
+
+        return retval;
+}
+
+static void __devexit piix4_remove(struct pci_dev *dev)
+{
+        if (piix4_smba) {
+                i2c_del_adapter(&piix4_adapter);
+                release_region(piix4_smba, SMBIOSIZE);
+                piix4_smba = 0;
+        }
+}
+
+static struct pci_driver piix4_driver = {
+        .name           = "piix4_smbus",
+        .id_table       = piix4_ids,
+        .probe          = piix4_probe,
+        .remove         = __devexit_p(piix4_remove),
+};
+
+static int __init i2c_piix4_init(void)
+{
+        return pci_register_driver(&piix4_driver);
+}
+
+static void __exit i2c_piix4_exit(void)
+{
+        pci_unregister_driver(&piix4_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+                "Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("PIIX4 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_piix4_init);
+module_exit(i2c_piix4_exit);