Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 117 insertions, 0 deletions

diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h
new file mode 100644
index 000000000000..a8ca3c9b546a
--- /dev/null
+++ b/drivers/i2c/algos/i2c-algo-ite.h
@@ -0,0 +1,117 @@
+/*
+   --------------------------------------------------------------------
+   i2c-ite.h: Global defines for the I2C controller on board the    
+                 ITE MIPS processor.                                
+   --------------------------------------------------------------------
+   Hai-Pao Fan, MontaVista Software, Inc.
+   hpfan@mvista.com or source@mvista.com
+
+   Copyright 2001 MontaVista Software Inc.
+
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#ifndef I2C_ITE_H
+#define I2C_ITE_H 1
+
+#include <asm/it8172/it8172.h>
+
+/* I2C Registers */
+#define ITE_I2CHCR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
+#define ITE_I2CHSR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
+#define ITE_I2CSAR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
+#define ITE_I2CSSAR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
+#define ITE_I2CCKCNT    IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
+#define ITE_I2CSHDR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
+#define ITE_I2CRSUR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
+#define ITE_I2CPSUR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
+
+#define ITE_I2CFDR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
+#define ITE_I2CFBCR     IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
+#define ITE_I2CFCR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
+#define ITE_I2CFSR      IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
+
+
+/* Host Control Register ITE_I2CHCR */
+#define ITE_I2CHCR_HCE  0x01    /* Enable I2C Host Controller */
+#define ITE_I2CHCR_IE   0x02    /* Enable the interrupt after completing
+                                   the current transaction */
+#define ITE_I2CHCR_CP_W 0x00    /* bit2-4 000 - Write */
+#define ITE_I2CHCR_CP_R 0x08    /*        010 - Current address read */
+#define ITE_I2CHCR_CP_S 0x10    /*        100 - Sequential read */
+#define ITE_I2CHCR_ST   0x20    /* Initiates the I2C host controller to execute
+                                   the command and send the data programmed in
+                                   all required registers to I2C bus */
+#define ITE_CMD         ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
+#define ITE_WRITE       ITE_CMD | ITE_I2CHCR_CP_W
+#define ITE_READ        ITE_CMD | ITE_I2CHCR_CP_R
+#define ITE_SREAD       ITE_CMD | ITE_I2CHCR_CP_S
+
+/* Host Status Register ITE_I2CHSR */
+#define ITE_I2CHSR_DB   0x01    /* Device is busy, receives NACK response except
+                                   in the first and last bytes */
+#define ITE_I2CHSR_DNE  0x02    /* Target address on I2C bus does not exist */
+#define ITE_I2CHSR_TDI  0x04    /* R/W Transaction on I2C bus was completed */
+#define ITE_I2CHSR_HB   0x08    /* Host controller is processing transactions */
+#define ITE_I2CHSR_FER  0x10    /* Error occurs in the FIFO */
+
+/* Slave Address Register ITE_I2CSAR */
+#define ITE_I2CSAR_SA_MASK      0xfe    /* Target I2C device address */
+#define ITE_I2CSAR_ASO          0x0100  /* Output 1/0 to I2CAS port when the
+                                           next slave address is addressed */
+
+/* Slave Sub-address Register ITE_I2CSSAR */
+#define ITE_I2CSSAR_SUBA_MASK   0xff    /* Target I2C device sub-address */
+
+/* Clock Counter Register ITE_I2CCKCNT */
+#define ITE_I2CCKCNT_STOP       0x00    /* stop I2C clock */
+#define ITE_I2CCKCNT_HPCC_MASK  0x7f    /* SCL high period counter */
+#define ITE_I2CCKCNT_LPCC_MASK  0x7f00  /* SCL low period counter */
+
+/* START Hold Time Register ITE_I2CSHDR */
+/* value is counted based on 16 MHz internal clock */
+#define ITE_I2CSHDR_FM  0x0a    /* START condition at fast mode */
+#define ITE_I2CSHDR_SM  0x47    /* START contition at standard mode */
+
+/* (Repeated) START Setup Time Register ITE_I2CRSUR */
+/* value is counted based on 16 MHz internal clock */
+#define ITE_I2CRSUR_FM  0x0a    /* repeated START condition at fast mode */
+#define ITE_I2CRSUR_SM  0x50    /* repeated START condition at standard mode */
+
+/* STOP setup Time Register ITE_I2CPSUR */
+
+/* FIFO Data Register ITE_I2CFDR */
+#define ITE_I2CFDR_MASK         0xff
+
+/* FIFO Byte Count Register ITE_I2CFBCR */
+#define ITE_I2CFBCR_MASK        0x3f
+
+/* FIFO Control Register ITE_I2CFCR */
+#define ITE_I2CFCR_FLUSH        0x01    /* Flush FIFO and reset the FIFO point
+                                           and I2CFSR */
+/* FIFO Status Register ITE_I2CFSR */
+#define ITE_I2CFSR_FO   0x01    /* FIFO is overrun when write */
+#define ITE_I2CFSR_FU   0x02    /* FIFO is underrun when read */
+#define ITE_I2CFSR_FF   0x04    /* FIFO is full when write */
+#define ITE_I2CFSR_FE   0x08    /* FIFO is empty when read */
+
+#endif  /* I2C_ITE_H */