[PATCH] hwmon: hwmon vs i2c, second round (07/11)

The only part left in i2c-sensor is the VRM/VRD/VID handling code.
This is in no way related to i2c, so it doesn't belong there. Move
the code to hwmon, where it belongs.

Note that not all hardware monitoring drivers do VRM/VRD/VID
operations, so less drivers depend on hwmon-vid than there were
depending on i2c-sensor.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

16 files changed, 145 insertions, 60 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6483ff696b5a..35fe7d1d4028 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -19,10 +19,13 @@ config HWMON
           This support can also be built as a module.  If so, the module
           will be called hwmon.
 
+config HWMON_VID
+        tristate
+        default n
+
 config SENSORS_ADM1021
         tristate "Analog Devices ADM1021 and compatibles"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for Analog Devices ADM1021
           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
@@ -35,7 +38,7 @@ config SENSORS_ADM1021
 config SENSORS_ADM1025
         tristate "Analog Devices ADM1025 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for Analog Devices ADM1025
           and Philips NE1619 sensor chips.
@@ -46,7 +49,7 @@ config SENSORS_ADM1025
 config SENSORS_ADM1026
         tristate "Analog Devices ADM1026 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for Analog Devices ADM1026
           sensor chip.
@@ -57,7 +60,6 @@ config SENSORS_ADM1026
 config SENSORS_ADM1031
         tristate "Analog Devices ADM1031 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Analog Devices ADM1031
           and ADM1030 sensor chips.
@@ -68,7 +70,7 @@ config SENSORS_ADM1031
 config SENSORS_ADM9240
         tristate "Analog Devices ADM9240 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for Analog Devices ADM9240,
           Dallas DS1780, National Semiconductor LM81 sensor chips.
@@ -79,7 +81,7 @@ config SENSORS_ADM9240
 config SENSORS_ASB100
         tristate "Asus ASB100 Bach"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for the ASB100 Bach sensor
           chip found on some Asus mainboards.
@@ -90,7 +92,7 @@ config SENSORS_ASB100
 config SENSORS_ATXP1
         tristate "Attansic ATXP1 VID controller"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for the Attansic ATXP1 VID
           controller.
@@ -104,7 +106,6 @@ config SENSORS_ATXP1
 config SENSORS_DS1621
         tristate "Dallas Semiconductor DS1621 and DS1625"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Dallas Semiconductor
           DS1621 and DS1625 sensor chips.
@@ -115,7 +116,6 @@ config SENSORS_DS1621
 config SENSORS_FSCHER
         tristate "FSC Hermes"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Fujitsu Siemens
           Computers Hermes sensor chips.
@@ -126,7 +126,6 @@ config SENSORS_FSCHER
 config SENSORS_FSCPOS
         tristate "FSC Poseidon"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for Fujitsu Siemens
           Computers Poseidon sensor chips.
@@ -137,7 +136,6 @@ config SENSORS_FSCPOS
 config SENSORS_GL518SM
         tristate "Genesys Logic GL518SM"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for Genesys Logic GL518SM
           sensor chips.
@@ -148,7 +146,7 @@ config SENSORS_GL518SM
 config SENSORS_GL520SM
         tristate "Genesys Logic GL520SM"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for Genesys Logic GL520SM
           sensor chips.
@@ -159,8 +157,8 @@ config SENSORS_GL520SM
 config SENSORS_IT87
         tristate "ITE IT87xx and compatibles"
         depends on HWMON && I2C
-        select I2C_SENSOR
         select I2C_ISA
+        select HWMON_VID
         help
           If you say yes here you get support for ITE IT87xx sensor chips
           and clones: SiS960.
@@ -171,7 +169,6 @@ config SENSORS_IT87
 config SENSORS_LM63
         tristate "National Semiconductor LM63"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for the National Semiconductor
           LM63 remote diode digital temperature sensor with integrated fan
@@ -184,7 +181,6 @@ config SENSORS_LM63
 config SENSORS_LM75
         tristate "National Semiconductor LM75 and compatibles"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor LM75
           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
@@ -200,7 +196,6 @@ config SENSORS_LM75
 config SENSORS_LM77
         tristate "National Semiconductor LM77"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor LM77
           sensor chips.
@@ -211,7 +206,6 @@ config SENSORS_LM77
 config SENSORS_LM78
         tristate "National Semiconductor LM78 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for National Semiconductor LM78,
@@ -223,7 +217,6 @@ config SENSORS_LM78
 config SENSORS_LM80
         tristate "National Semiconductor LM80"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor
           LM80 sensor chips.
@@ -234,7 +227,6 @@ config SENSORS_LM80
 config SENSORS_LM83
         tristate "National Semiconductor LM83"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor
           LM83 sensor chips.
@@ -245,7 +237,7 @@ config SENSORS_LM83
 config SENSORS_LM85
         tristate "National Semiconductor LM85 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for National Semiconductor LM85
           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
@@ -256,7 +248,7 @@ config SENSORS_LM85
 config SENSORS_LM87
         tristate "National Semiconductor LM87"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
+        select HWMON_VID
         help
           If you say yes here you get support for National Semiconductor LM87
           sensor chips.
@@ -267,7 +259,6 @@ config SENSORS_LM87
 config SENSORS_LM90
         tristate "National Semiconductor LM90 and compatibles"
         depends on HWMON && I2C
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor LM90,
           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
@@ -282,7 +273,6 @@ config SENSORS_LM90
 config SENSORS_LM92
         tristate "National Semiconductor LM92 and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for National Semiconductor LM92
           and Maxim MAX6635 sensor chips.
@@ -293,7 +283,6 @@ config SENSORS_LM92
 config SENSORS_MAX1619
         tristate "Maxim MAX1619 sensor chip"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for MAX1619 sensor chip.
 
@@ -303,8 +292,8 @@ config SENSORS_MAX1619
 config SENSORS_PC87360
         tristate "National Semiconductor PC87360 family"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
+        select HWMON_VID
         help
           If you say yes here you get access to the hardware monitoring
           functions of the National Semiconductor PC8736x Super-I/O chips.
@@ -318,7 +307,6 @@ config SENSORS_PC87360
 config SENSORS_SIS5595
         tristate "Silicon Integrated Systems Corp. SiS5595"
         depends on HWMON && I2C && PCI && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for the integrated sensors in
@@ -330,7 +318,6 @@ config SENSORS_SIS5595
 config SENSORS_SMSC47M1
         tristate "SMSC LPC47M10x and compatibles"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for the integrated fan
@@ -343,7 +330,6 @@ config SENSORS_SMSC47M1
 config SENSORS_SMSC47B397
         tristate "SMSC LPC47B397-NC"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for the SMSC LPC47B397-NC
@@ -355,7 +341,6 @@ config SENSORS_SMSC47B397
 config SENSORS_VIA686A
         tristate "VIA686A"
         depends on HWMON && I2C && PCI
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get support for the integrated sensors in
@@ -367,8 +352,8 @@ config SENSORS_VIA686A
 config SENSORS_W83781D
         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
         depends on HWMON && I2C
-        select I2C_SENSOR
         select I2C_ISA
+        select HWMON_VID
         help
           If you say yes here you get support for the Winbond W8378x series
           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
@@ -380,7 +365,6 @@ config SENSORS_W83781D
 config SENSORS_W83792D
         tristate "Winbond W83792D"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for the Winbond W83792D chip.
 
@@ -390,7 +374,6 @@ config SENSORS_W83792D
 config SENSORS_W83L785TS
         tristate "Winbond W83L785TS-S"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         help
           If you say yes here you get support for the Winbond W83L785TS-S
           sensor chip, which is used on the Asus A7N8X, among other
@@ -402,8 +385,8 @@ config SENSORS_W83L785TS
 config SENSORS_W83627HF
         tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
+        select HWMON_VID
         help
           If you say yes here you get support for the Winbond W836X7 series
           of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
@@ -414,7 +397,6 @@ config SENSORS_W83627HF
 config SENSORS_W83627EHF
         tristate "Winbond W83627EHF"
         depends on HWMON && I2C && EXPERIMENTAL
-        select I2C_SENSOR
         select I2C_ISA
         help
           If you say yes here you get preliminary support for the hardware
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 187b89d47f83..381f1bf04cc5 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_HWMON)             += hwmon.o
+obj-$(CONFIG_HWMON_VID)         += hwmon-vid.o
 
 # asb100, then w83781d go first, as they can override other drivers' addresses.
 obj-$(CONFIG_SENSORS_ASB100)    += asb100.o
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 229fd0de6f9e..526b7ff179eb 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -50,8 +50,8 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /*
@@ -473,7 +473,7 @@ static void adm1025_init_client(struct i2c_client *client)
         struct adm1025_data *data = i2c_get_clientdata(client);
         int i;
 
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         /*
          * Set high limits
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index f32f819efcfc..625158110fd4 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -28,9 +28,9 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
-#include <linux/hwmon-sysfs.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /* Addresses to scan */
@@ -1552,7 +1552,7 @@ int adm1026_detect(struct i2c_adapter *adapter, int address,
                 goto exitfree;
 
         /* Set the VRM version */
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         /* Initialize the ADM1026 chip */
         adm1026_init_client(new_client);
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 0a742cb88f4c..bc7faef162f7 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -45,8 +45,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /* Addresses to scan */
@@ -657,7 +657,7 @@ static void adm9240_init_client(struct i2c_client *client)
         u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG);
         u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3;
 
-        data->vrm = i2c_which_vrm(); /* need this to report vid as mV */
+        data->vrm = vid_which_vrm(); /* need this to report vid as mV */
 
         dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10,
                         data->vrm % 10);
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 66b0dbd1af0e..8e34855a6274 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -39,8 +39,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
@@ -973,7 +973,7 @@ static void asb100_init_client(struct i2c_client *client)
 
         vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
         vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
         vid = vid_from_reg(vid, data->vrm);
 
         /* Start monitoring */
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index 5cf77e67a2ed..deb4d34c9539 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -23,8 +23,8 @@
 #include <linux/module.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 MODULE_LICENSE("GPL");
@@ -296,7 +296,7 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind)
         }
 
         /* Get VRM */
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         if ((data->vrm != 90) && (data->vrm != 91)) {
                 dev_err(&new_client->dev, "Not supporting VRM %d.%d\n",
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index de6608a159c3..12fd757066fc 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -26,8 +26,8 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /* Type of the extra sensor */
@@ -617,7 +617,7 @@ static void gl520_init_client(struct i2c_client *client)
         conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
 
         data->alarm_mask = 0xff;
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         if (extra_sensor_type == 1)
                 conf &= ~0x10;
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
new file mode 100644
index 000000000000..ce475c93f836
--- /dev/null
+++ b/drivers/hwmon/hwmon-vid.c
@@ -0,0 +1,103 @@
+/*
+    hwmon-vid.c - VID/VRM/VRD voltage conversions
+
+    Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/hwmon-vid.h>
+
+struct vrm_model {
+        u8 vendor;
+        u8 eff_family;
+        u8 eff_model;
+        int vrm_type;
+};
+
+#define ANY 0xFF
+
+#ifdef CONFIG_X86
+
+static struct vrm_model vrm_models[] = {
+        {X86_VENDOR_AMD, 0x6, ANY, 90},         /* Athlon Duron etc */
+        {X86_VENDOR_AMD, 0xF, ANY, 24},         /* Athlon 64, Opteron */
+        {X86_VENDOR_INTEL, 0x6, 0x9, 85},       /* 0.13um too */
+        {X86_VENDOR_INTEL, 0x6, 0xB, 85},       /* 0xB Tualatin */
+        {X86_VENDOR_INTEL, 0x6, ANY, 82},       /* any P6 */
+        {X86_VENDOR_INTEL, 0x7, ANY, 0},        /* Itanium */
+        {X86_VENDOR_INTEL, 0xF, 0x3, 100},      /* P4 Prescott */
+        {X86_VENDOR_INTEL, 0xF, ANY, 90},       /* P4 before Prescott */
+        {X86_VENDOR_INTEL, 0x10,ANY, 0},        /* Itanium 2 */
+        {X86_VENDOR_UNKNOWN, ANY, ANY, 0}       /* stop here */
+        };
+
+static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
+{
+        int i = 0;
+
+        while (vrm_models[i].vendor!=X86_VENDOR_UNKNOWN) {
+                if (vrm_models[i].vendor==vendor)
+                        if ((vrm_models[i].eff_family==eff_family)&& \
+                        ((vrm_models[i].eff_model==eff_model)|| \
+                        (vrm_models[i].eff_model==ANY)))
+                                return vrm_models[i].vrm_type;
+                i++;
+        }
+
+        return 0;
+}
+
+int vid_which_vrm(void)
+{
+        struct cpuinfo_x86 *c = cpu_data;
+        u32 eax;
+        u8 eff_family, eff_model;
+        int vrm_ret;
+
+        if (c->x86 < 6) return 0;       /* any CPU with familly lower than 6
+                                        dont have VID and/or CPUID */
+        eax = cpuid_eax(1);
+        eff_family = ((eax & 0x00000F00)>>8);
+        eff_model  = ((eax & 0x000000F0)>>4);
+        if (eff_family == 0xF) {        /* use extended model & family */
+                eff_family += ((eax & 0x00F00000)>>20);
+                eff_model += ((eax & 0x000F0000)>>16)<<4;
+        }
+        vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor);
+        if (vrm_ret == 0)
+                printk(KERN_INFO "hwmon-vid: Unknown VRM version of your"
+                " x86 CPU\n");
+        return vrm_ret;
+}
+
+/* and now for something completely different for Non-x86 world*/
+#else
+int vid_which_vrm(void)
+{
+        printk(KERN_INFO "hwmon-vid: Unknown VRM version of your CPU\n");
+        return 0;
+}
+#endif
+
+EXPORT_SYMBOL(vid_which_vrm);
+
+MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+
+MODULE_DESCRIPTION("hwmon-vid driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 84877665b66e..53cc2b6d6385 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -37,9 +37,9 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-isa.h>
-#include <linux/i2c-vid.h>
-#include <linux/hwmon-sysfs.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <asm/io.h>
 
@@ -919,7 +919,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind)
         }
 
         if (data->type == it8712) {
-                data->vrm = i2c_which_vrm();
+                data->vrm = vid_which_vrm();
                 device_create_file_vrm(new_client);
                 device_create_file_vid(new_client);
         }
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index aeb478815f72..ab214df9624b 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -28,8 +28,8 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /* Addresses to scan */
@@ -1147,7 +1147,7 @@ int lm85_detect(struct i2c_adapter *adapter, int address,
                 goto ERROR1;
 
         /* Set the VRM version */
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         /* Initialize the LM85 chip */
         lm85_init_client(new_client);
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index d0d2464c1b73..dca996de4c33 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -57,8 +57,8 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 
 /*
@@ -694,7 +694,7 @@ static void lm87_init_client(struct i2c_client *client)
         u8 config;
 
         data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         config = lm87_read_value(client, LM87_REG_CONFIG);
         if (!(config & 0x01)) {
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index c66ae4f6e802..08fcb5aea764 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -39,8 +39,8 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-isa.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <asm/io.h>
 
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 2d2fcfb706d7..02bd5c0239a2 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -43,8 +43,8 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-isa.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <asm/io.h>
 #include "lm75.h"
@@ -1316,7 +1316,7 @@ static void w83627hf_init_client(struct i2c_client *client)
                 data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82;
         } else {
                 /* Convert VID to voltage based on default VRM */
-                data->vrm = i2c_which_vrm();
+                data->vrm = vid_which_vrm();
         }
 
         tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 47607983acfd..4c43337ca780 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -39,8 +39,8 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-isa.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <asm/io.h>
 #include "lm75.h"
@@ -1478,7 +1478,7 @@ w83781d_init_client(struct i2c_client *client)
                 w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
         }
 
-        data->vrm = i2c_which_vrm();
+        data->vrm = vid_which_vrm();
 
         if ((type != w83781d) && (type != as99127f)) {
                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index d6d8c0f04e32..ba0c28015f6a 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -40,7 +40,6 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c-vid.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>