hwmon/w83627ehf: Add support for the VID inputs

The W83627EHF and similar chips have 6 VID input pins, add support
for them. The driver changes the input voltage level automatically
if the current setting is not correct for the detected CPU model.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

2 files changed, 49 insertions, 2 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index fe7962bada13..dbdca6f10e46 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -618,6 +618,7 @@ config SENSORS_W83627HF
 
 config SENSORS_W83627EHF
         tristate "Winbond W83627EHF/DHG"
+        select HWMON_VID
         help
           If you say yes here you get support for the hardware
           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 0c2d929cf573..a336793c1caf 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -45,6 +45,7 @@
 #include <linux/platform_device.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <asm/io.h>
@@ -68,8 +69,11 @@ static const char * w83627ehf_device_names[] = {
 
 #define SIO_REG_LDSEL           0x07    /* Logical device select */
 #define SIO_REG_DEVID           0x20    /* Device ID (2 bytes) */
+#define SIO_REG_EN_VRM10        0x2C    /* GPIO3, GPIO4 selection */
 #define SIO_REG_ENABLE          0x30    /* Logical device enable */
 #define SIO_REG_ADDR            0x60    /* Logical device address (2 bytes) */
+#define SIO_REG_VID_CTRL        0xF0    /* VID control */
+#define SIO_REG_VID_DATA        0xF1    /* VID data */
 
 #define SIO_W83627EHF_ID        0x8850
 #define SIO_W83627EHG_ID        0x8860
@@ -285,6 +289,9 @@ struct w83627ehf_data {
 
         u8 fan_min_output[4]; /* minimum fan speed */
         u8 fan_stop_time[4];
+
+        u8 vid;
+        u8 vrm;
 };
 
 struct w83627ehf_sio_data {
@@ -1127,6 +1134,14 @@ static struct sensor_device_attribute sda_sf3_arrays[] = {
                     store_fan_min_output, 2),
 };
 
+static ssize_t
+show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+        struct w83627ehf_data *data = dev_get_drvdata(dev);
+        return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
 /*
  * Driver and device management
  */
@@ -1165,6 +1180,8 @@ static void w83627ehf_device_remove_files(struct device *dev)
                 device_remove_file(dev, &sda_temp[i].dev_attr);
 
         device_remove_file(dev, &dev_attr_name);
+        if (data->vid != 0x3f)
+                device_remove_file(dev, &dev_attr_cpu0_vid);
 }
 
 /* Get the monitoring functions started */
@@ -1196,7 +1213,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
         struct w83627ehf_sio_data *sio_data = dev->platform_data;
         struct w83627ehf_data *data;
         struct resource *res;
-        u8 fan4pin, fan5pin;
+        u8 fan4pin, fan5pin, en_vrm10;
         int i, err = 0;
 
         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -1230,9 +1247,32 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
                 data->fan_min[i] = w83627ehf_read_value(data,
                                    W83627EHF_REG_FAN_MIN[i]);
 
+        data->vrm = vid_which_vrm();
+        superio_enter(sio_data->sioreg);
+        /* Set VID input sensibility if needed. In theory the BIOS should
+           have set it, but in practice it's not always the case. */
+        en_vrm10 = superio_inb(sio_data->sioreg, SIO_REG_EN_VRM10);
+        if ((en_vrm10 & 0x08) && data->vrm != 100) {
+                dev_warn(dev, "Setting VID input voltage to TTL\n");
+                superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
+                             en_vrm10 & ~0x08);
+        } else if (!(en_vrm10 & 0x08) && data->vrm == 100) {
+                dev_warn(dev, "Setting VID input voltage to VRM10\n");
+                superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
+                             en_vrm10 | 0x08);
+        }
+        /* Read VID value */
+        superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
+        if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80)
+                data->vid = superio_inb(sio_data->sioreg, SIO_REG_VID_DATA) & 0x3f;
+        else {
+                dev_info(dev, "VID pins in output mode, CPU VID not "
+                         "available\n");
+                data->vid = 0x3f;
+        }
+
         /* fan4 and fan5 share some pins with the GPIO and serial flash */
 
-        superio_enter(sio_data->sioreg);
         fan5pin = superio_inb(sio_data->sioreg, 0x24) & 0x2;
         fan4pin = superio_inb(sio_data->sioreg, 0x29) & 0x6;
         superio_exit(sio_data->sioreg);
@@ -1308,6 +1348,12 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
         if (err)
                 goto exit_remove;
 
+        if (data->vid != 0x3f) {
+                err = device_create_file(dev, &dev_attr_cpu0_vid);
+                if (err)
+                        goto exit_remove;
+        }
+
         data->class_dev = hwmon_device_register(dev);
         if (IS_ERR(data->class_dev)) {
                 err = PTR_ERR(data->class_dev);